IPod freezes iTunes in normal mode, will not restore in disk mode

Several days ago, I began having problems with my iPod. When I attempted to sync some podcasts to it, I got an error message saying "iPod cannot be synced. Error -48." I was still able to play the music on my iPod, but I would get the same error every time I connected it to my computer. I downloaded the latest version of iTunes and restored it, thinking this would solve my problem, but when I put music on it it became really glitchy and the album art was messed up. I once again restored it and encountered the same problem. Eventually when I plugged it in, iTunes would freeze and become non responsive until the second I unplugged the iPod. I put it in disk mode and tried again. This time iTunes did not freeze, but when I tried to restore I got an error message saying it was unable to do so. I tried to manually reformat it through "My Computer," but when I tried it in normal mode it froze, and in disk mode it said it was unable to reformat Removable Disc (E:). I have tried repeatedly to find a solution, tried hooking it up to different computers, but it seems the problem lies with the iPod. I am utterly at a loss for ideas. Any help would be greatly appreciated.

I just barely tried restoring it in disk mode again on another computer, and was told something new: "firmware is corrupt. Disconnect and reconnect." I've tried it twice and it tells me the same thing after taking a half an hour to download the update.

Similar Messages

  • My ipod touch is disabled and will not go into disk mode so i can restore i

    my ipod touch is disabled and it will not go into disk mode so i can restore it help please and thanks

    - Try using this program to place the iPod in recovery mode:
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Try DFU mode instead.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • TS1702 I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    If iTunes sees the iPod, try a manual install, as pointed out on link below.
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Apple logo remains on IPOD screen and will not go into Disk Mode or Reset

    My IPOD Mini is just showing the apple logo. I tried performing the procedures in the help section of the website. The IPOD will not go into Disk Mode! Is there another way to solve the problem without having to pay for expensive repairs?
    Ipod Mini   Windows XP  

    Oh my gosh!!! I'm having the same issue with my 60Gig iPod Photo. I had t leave for dinner so, I put the iPod in the cradle in case it ran out of juice. After I came back three hours later, the same screen--silver apple/black background screen is showing. Please help!!!!

  • My mini ipod will not go into disk mode. What should I do?

    When ever I try to put it into disk mode it will either not go into disk mode for a few seconds or it will not go into disk mode at all.

    Hi Jennifer,
    Have you checked out these two articles?
    http://docs.info.apple.com/article.html?artnum=93651
    http://docs.info.apple.com/article.html?artnum=61131
    Best of luck,
    Ant B

  • HT201406 My iPod touch is locked up. It will not restore from update mode. After holding the on/off button down the slide to powerer off does not appear.

    My iPod is loched up. I downloaded a new update and now it will not restore.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT1212 My Ipod touch is disabled. It will not restore and it will not let me enter my passcode. I know the passcode but it will not allow me to enter the passcode.

    IPOD touch is disabled. Device will not allow me to enter a passcode or restore device through Itunes.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • 5c in recovery mode will not restore or update - iTunes is current version - Completely lost and very frustrated :o(

    My phone lately has been searching for service constantly, I would say that 80%of my day my phone is searching for service. There was a software update for I think 8.1.2, my phone didn't have enough storage, so I tried to do it through iTunes, when I did that, I got the connect to iTunes screen and couldn't get past it. So now I have put my phone into recovery mode and have run into nothing but issues. One iTunes will not let me update the software, secondly I can't restore it, I get a pop up saying something that my device isn't recognized. I'm completely lost and frustrated Need some suggestions...

    Hello sarmath,
    Thanks for using Apple Support Communities.
    From your post I understand that your iPhone is in recovery mode, and while trying to restore it in iTunes you are receiving an error message.  While certainly a frustrating experience, there is troubleshooting you can do to get your iPhone back up in running order.  Without a specific error message, the article below is where you can start.  If possible, please provide the exact error message you receive when trying to restore your iPhone so I can give you some more in depth help.
    Resolve iOS update and restore errors in iTunes - Apple Support
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • Ipod stuck in DFU mode will not restore

    i put my ipod in DFU mode becouse it wouldnt go into recovery mode now due to code 3194 i cant restore it and it will not do anything.  it is just a black screen and im worried that its broken    Anyone know how to fix it?

    See:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    How to solve iTunes error 3194 in 10 simple steps

  • HT1363 My ipod click wheel will not go into disk mode.  All I get is the red circle with the X in it

    The only thing my ipod will do is display the red circle with the X in it.  I can not put it in disk mode, it won't work.  It's the 160 GB classic with the click wheel.  Is there anything else I can do to make it work again?

    If you are unable to get the iPod into Disk Mode, the Hard Drive is likely damaged and beyond repair. You'll probably want to have it replaced either by Apple or a third party service center.
    Here are Apple's repair prices.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • 20G iPod will not go into disk mode

    Hopefully someone can help.
    I have a 2.5 year old 20g iPod with black / white screen.
    I have the unhappy icon showing on the screen. I have tried the 5R's with no success and have been advised to go into disk mode in order to restore via iPod updater etc.
    I cannot achieve disk mode and my PC (and other will not recognise).
    It also makes a clicking noise booting up, surely the hard drive cannot be faulty after such a relativly short time.
    Any help is much appreciated..........Dave
      Windows XP  

    Hopefully someone can help.
    I have a 2.5 year old 20g iPod with black / white screen.
    I have the unhappy icon showing on the screen. I have tried the 5R's with no success and have been advised to go into disk mode in order to restore via iPod updater etc.
    I cannot achieve disk mode and my PC (and other will not recognise).
    It also makes a clicking noise booting up, surely the hard drive cannot be faulty after such a relativly short time.
    Any help is much appreciated..........Dave
      Windows XP  

  • Ipod with sad face and will not stay in disk mode but hdd works

    Hi,
    I've got a problem with my ipod and i've tried everything to fix it and nothing works.
    So basically after my ipod gave me the sad face I tried putting it into disk mode and that worked successfully! However after I plugged it to my computer, it would (after a few moments and windows detects something being plugged in) it resets itself and gives me the sad face again and following that a sign comes up saying Please Wait Very Low Battery.
    I know its not a low battery problem since during disk mode the battery is full.
    Other strange things is that in Diagnostics mode the HDSpecs section just shows just a bunch on meaningless characters and numbers for each of the specs listed. I thought that this may have just meant I had a broken harddrive so i got one of those ipod harddrive to IDE converters and plugged by ipod harddrive in (yes i now have opened the ipod). Strangely enough the ipod hard drive appears on my computer and works beautifully and i can read and write to the drive.
    I went though the forums and found someone with the exact same problem and was solved:
    http://discussions.apple.com/thread.jspa?messageID=7244984&#7244984
    However the person never said how they solved it except that they followed the guide posted by Mitch 751 which I also tried to no success.
    Does anyone have any ideas what else I can try?
    Cheers,
    Victor

    same problem mate ???

  • Corrupt iPod freezes iTunes/computer so I can't restore it

    I used the restore option a few months ago to get my iPod working again (normal, stuck-on-stupid issues) and it's been fine. Until yesterday - I was listening to some music and it suddenly started skipping through all the songs and then refused to play anything at all.
    I plugged it into my computer and I got the whole ..."iPod is corrupted... you may need to restore..." message. When I tried to restore, it said resource could not be found.
    SINCE THEN... my computer has stopped even recognizing the device. It freezes iTunes (and any other programs that may be running) every time I plug in my iPod.
    I've spent all last evening and all day today trying the Apple support suggestions step-by-step - including uninstalling iTunes and reinstalling it & forcing the iPod into Disk Mode - and combing the discussion lists, but none of the suggestions I've found have helped b/c I can't actually get it connected to the computer without freezing everything up.
    (I have run virus scans, tried different USB ports, etc. No change. I even have had to resort to unplugging the stupid thing by hand b/c it stopped responding to the safe disk eject utility...)
    Found a website that suggests opening up the iPod and putting a shim inside to force the hard drive to "read"... but I'm afraid to kill it completely. Can't afford to buy a new one (or spend a lot getting it repaired either).
    If anyone can help, I'd REALLY REALLY appreciate it...
    Thanks!

    First let me say I am NOT a pro but it sounds to me like your iPod's hard disk is ka-put. May I suggest next time you connect your ipod to your pc you let it sit like that for a while. I have found that if iTunes don't find what it expects to find it can spaz out for a while, so sometimes if you wait long enough (half an hour?) with it just sitting there you may get a more helpfull responce from iTunes. Also there is a key press combination on the iPod that will put your IPod into a diagnostic mode and offer a menu with a few options.
    Sorry but I don't recall the keys and they differ from pod to pod.
    Anyways good luck, I feel for ya...

  • Black Screen, unable to come out of recovery mode, will not restore. Uhh...

    Okay. So my phone has a completely black screen, and will not turn on or off. When I connect it to iTunes, it says it has detected an iPhone in recovery mode, and it must be restored. I attempt to restore it, and it goes through the entire restoration process (all the while with a totally black screen), and a window pops up that says that it was successfully restored, and to leave it plugged in, this message will close in 3,2,1.... and as soon as the window disappears, the process starts all over, with iTunes exclaiming that it noticed an iPhone in recovery mode, would I like to restore it?
    I've tried basically everything there is to try, about eighteen thousand times a piece. This is really the worst possible time for my phone to break down, as I'm in the middle of a really important internship (which necessitates use of my phone), and I can't really get to an apple store.
    HELLLLLLPPPPP MEEEEEEEE.

    Did you check your security software settings, to allow iTunes to contact Apple during the process?
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    copied from http://support.apple.com/kb/TS3694

  • G3 Blue/White will not enter firewire disk mode

    I have just purchased a G5 IMAC (the 20inch model) and want to transfer settings from the OS 10.3.9 operating program on the G3 to the G5 which has Tiger, OS 1.4 on it. The G5 will automatically move data to the right applications in 10.4 if the G3 would start up in the Firewire Disk Mode via the firewire connection between the two machines. Unfortunately, all it does on restart when holding the "T" key down is start up in the the panther (10.3.9) mode. Does anyone know how I can fix this problem. The G3 also has OS 9.2.2 installed on it. The G3 has two firewire ports, each one has version 2.8.6 on the firewire extemsions.
    G3 PowerMAC, Blue & White Mac OS 9.2.x and a spanking new G5 IMAC (20 inch)

    Hi C3, and welcome to the discussions.
    Unfortunately, the blue & white G3 does not support target mode (see here).
    You'll have to transfer your settings the old fashioned way.
    Andrew
    Dual 2.0 GHz G5   Mac OS X (10.3.9)  

Maybe you are looking for

  • Submit PROG

    Hi Friends,    I am facing problem in submit statement,        I have to submit my report internal table records into 'F.13'  transaction through SUBMIT statement without selection-screen of F.13, my internal table having fields,                     

  • Seperate the badge display into 2 options

    This request would allow the badges to be on in the filmstrip and off in the grid view or visa versa rather than on or off for both.

  • Multiple canvases overlapping other canvas

    I have 3 canvases in one form. The first one will appear at the top and the other 2 will appear at the bottom. I have created a radio button in the first canvas to allow the user to have to option to choose. If the first option is choosed, the 2nd ca

  • ZCM 10.3.3 - cannot register new installations

    This is a problem that recently has reared its ugly head. Installing ZCM 10.3.3 agent on XP Pro SP3 workstations appears to work; however, the workstations do not register with the ZCM server. Newly imaged workstations (with ZCM 10.3.3 installed some

  • Loading zeroes to Essbase

    Is it possible, when loading to Essbase to make it so all zeroes go in a #Missing? I tried to create a script, but the zeroes still do not load. Is there a setting I need to turn on to allow for this?