Ipod freezes when trying to import cds

This just happened a few days ago. I have been trying to import cds, but can't because the song that I am trying to import freezes. When I click quit nothing happens. Internet explorer also freezes, and I have to turn my computer off manually.
I thought it was because I recently downloaded Internet Explorer 8, but that isn't the problem because I uninstalled it and it is still happening.
I even tried to uninstall itunes and quicktime, but nothing happens.
This is very frustrating because I can't get in contact with Apple because they say my warranty has expired, and I will have to pay $29.00 for a one time call.
Based on these discussions, I am not the only one having the same type of problem. Apple seems to know about it, but is doing nothing.

I meant importing cds to my ipod. I found out the hard way that some can't be imported. My computer crashed because of it. I just bought a new one.
I contacted my virus prtection provider, and was told that the problem maybe that it wasn't compatible with other programs I was running on my computer.
The only program I can think of is internet explorer 8. I had just downloaded it when it started to occur.
I contacted microsoft before the crash, and they said to contact apple which I couldn't because my warranty had expired.
Anyway, I am done with putting music on ipods. I am just going to use itunes to sync and recharge my ipod. When it stops working I'll just get rid of it.

Similar Messages

  • IPhoto freezing when trying to import photos from iPhone

    iPhoto has started freezing when trying to import photos from an iPhone. The device is recognised but just get "loading . . . " message with no photos appearing. Has anyone else seen this?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • TS1717 iTunes freezes when trying to import a CD

    Please help!
    My iTunes freezes when trying to import a CD
    This also happens in safe mode
    My driver is up to date

    We had the same issue. Backtracking, it turned out that it began after our techie updated our home network - for whatever reason, the main computer no longer holds the LAN settings properly after being restarted.
    It's an easy fix (until he gets back from the west coast and can fix it permanently): after I boot the computer each day, I open IE, go to "tools" - "internet options" - "connections" - "LAN settings" - check "automatically detect" and uncheck "use proxy server."
    Once I do that, CDDB comes up wonderfully and imports all the data I need.
    Rebecca

  • Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?

    Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?

    Afraid Compressor won't work with MKV. If you have access to a system running an earlier version than Mavericks, and with Perian installed you can use MPEG Streamclip or Quick Time Pro to convert to a mov.
    Russ

  • LR 3 freeze when trying to import (with a workaround)

    Hi,
    Windows XP SP3
    Core i7 with 4 GB RAM (3 in use)
    I had mentioned this in the previous IMPORT FREEZE thread, but that thread go pretty long and convoluted so I thought I would isolate the particular problem that I (and many others) are having.
    Problem is that when hitting the IMPORT button (or doing a drag and drop, or using the menu to select IMPORT), the screen freezes. Most of the time the cursor arrow is frozen on the Import button. LR thinks that it is in Import mode but there is no UI. To get out of this frozen mode you just have to hit the escape key, and LR dismisses the (non-existent) Import screen and continue to function normally.
    Sometimes the Import screen is partially drawn. I think this happens if the Import mode had worked previously in this session (like it does right after a complete re-boot).
    The problem is that once this problem shows up, while you can get out of the frozen program (by hitting the esc key) there is no way to import files into LR without re-booting.
    Workaround:
    This morning I realized that since the problem seems to be with drawing the Import screen, that maybe Auto-Import would work, and at least I would have the import function back. So I tried it and it works perfectly. I just download to the HD using another method to get the files from the memory card to the HD, and then move the files to the watch folder (after you enable Auto-Import). Set the preview to minimal so the "import" can go as fast as it can.
    Hope this helps, and if Adobe or anyone else with this specific import problem has additional info, please post it hear. I know other people are having problems with the actual import, but let's keep those in a seperate thread (at least that is my suggestion).
    Thanks in advance.
    Michael Tapes

    First let me say I appreciate your 2cts worth.  I am learning more about this issue with every post.  That's the great thing about forums.  It brings the smart people with the passion for making life easier for others together, learning a bit more at the same time.
    Before I downloaded the trial version I checked the system requirements.  Lightroom is built for systems several years old.  Here are my PC specs:
    - Dell Studio 1737
    - Windows Vista Home Premium w/SP1
    - Intel Core 2 Duo CPU T6500 @ 2.10GHz
    - 6 GB RAM
    - ATI Mobility Radeon HD 3650
    - 64-bit Operating System
    This should be more than enough to run the most demanding Lightroom tasks.  Your thoughts?

  • Mac keeps freezing when trying to import video

    When I try to import video to my i5 iMac 21.5" it gets to about 5 seconds and then freezes the copying file tab has been on the screen constant now for 2 days, it plays all the video directly from disk but I am trying to put them on an external HDD which is formatted as per the reccomendations.  This is happening virtually everytime I try and copy any files including to the local drive.  Also whilst Im on the subject I installed a printer and for some reason it keeps dropping the printer so I have to install it every time I want to use the printer.  Both the HDD and printer are compatible with apple mac and all the files as I said earlier run from CD/DVD.  Im running OSX Lion and apart from the files I am trying to import and the printer software its a vanilla build.

    Try trashing iMovie preferences. They are in your home library>preferences.

  • IPod freezes when trying to sync with iTunes 6.0.4(3)!

    Is anyone else having this problem?? My iPod (touch wheel) was working just fine until I updated iTunes the other night. Now it freezes when I try to sync it with iTunes! I tried resetting, restoring, checked all the updates, *****-slapping the iPod, everything. I see that others might be having the same problem -- is there a solution? Help!
    iMAC   Mac OS X (10.4.3)  

    Update:
    Any new news on this issue from anyone else?
    I left my iPod plugged into my PowerBook over night and when I woke it was functional. However, downloads from iTunes to the iPod take almost 3x's longer than they used to and there seems to be more errors than I've ever experienced (about 1 out of every 10 interfaces). Sometimes the error is that it can't write to the drive (iPod) and sometimes the error is that it can't mount the iPod. Also when the iPod is plugged in and displayed in iTunes, the "used" and "free" info is incorrect. I completely emptied my iPod and it says that I'm using -2.80 GB (impossible unless I've created a blackhole) and it says that I have 10.49 GB (capacity, under Get Info, is listed at 9.28 - which is were it's always been - it's a gen2 10GB iPod).
    Has anyone tried to format there iPod? Is this possible without harming the drive?
    Well, to sum it up my iPod is working but is having errors and bugs all over the place. If anyone has any new news I'd love to hear it.
    SPECS: iPod 10GB gen2, running 1.5(?), iTunes 6.0.4, PowerBook G4 800, OS 10.4.5
    Thanks

  • Robohelp 7 Freezes When Trying to Import Anything

    When I try to import anything into RoboHelp 7, it freezes. I
    go to File > Import and select any option. The result is that
    the entire application freezes until I click Escape.
    The only thing I've been trying to import is Captivate
    movies. The obvious workaround is to initiate movies from within
    RoboHelp, which I've been doing. Still, I would like it if I could
    import things ...
    I'm on XP and haven't done anything usual.

    I found out what the problem was. I configured dual monitor
    display for my laptop (so I could drag items between my laptop
    monitor and a desktop monitor). In dual monitor mode, the Import
    dialog box appears on the second monitor (because at some point, I
    imagine I dragged it there).
    When I switched back to single monitor mode, RoboHelp still
    thought I was in dual monitor mode and it put the dialog box on the
    other (blank or nonexistent) screen. Hence when I tried to import
    something, it seemed to freeze because it wouldn't let me push any
    other buttons until I made a selection on the dialog box I couldn't
    access.
    Here's the fix: Set up dual monitor mode again with two
    monitors. In RoboHelp, go to File > Import to prompt the dialog
    box. Drag the dialog back onto the same monitor as the application.
    Now switch back to single monitor mode and go to File > Import
    again. The application should remember to put the dialog box in the
    correct place, and it no longer freezes.

  • Ipod freezes when trying to play video

    I just got a new 8Gb nano 4th gen and ive had no trouble except for playing movies. I uploaded my movies and they have the correct format. they all play the first time but then when i try to play them a second time the screen goes black and the ipod freezes. I dont know what to do!
    any help is appreciated! Thanks

    Any one?

  • HT203175 keep getting error code 81 when trying to import cds into itunes

    since installing itunes 11 i keep getting a error message which says an unkown error occurred (81) when trying to impoprt cd's
    any ideas as to why would be helpful thanks.

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Ipod freezes when trying to connect usb to itunes

    It seems i have lost all my music on my 2 year old 5g ipod. Nothing shows up under artist/songs/etc, but in the settings it shows my 60gb ipod having 52gbs used (correct for the amount of music i have had loaded up until this point.
    Now when I try to connect my ipod to my imac, I can see the device on my desktop, and can even access the drive, but as soon as I try to open itunes the program freezes up, and i have to disconnect my usb connection (unable to dismount the correct way).
    So, im trying to find a solution where i can reset my ipod to its newborn factory fresh iteration. I cant do it through itunes because the ipod doesnt mount properly. Is there a hard reset somewhere? Not a reboot, but a factory fresh reset.
    Thanks so much for your help. These boards are so helpful!

    Hi
    Chicken of the VNC has to be installed on all computers you wish to use VNC on. The application itself, although good, does have a tendency to crash and display the problems you describe. I know Chicken of the VNC free but if you want full VNC capability that does not give you problems on the mac platform then you cant do worse than Apple Remote Desktop.

  • Ipod freezes when trying to sync/sometimes reboots my computer?!?

    I have a 20 gig ipod from 2004 (click-wheel with no color screen) that I have been trying to update my library on. Every time it tries to sync, it freezes and I have to plug it into the power supply in order to restart it. It also won't take any new songs if I try to add them manually. I tried restoring factory settings and updating my ipod software and that didn't help. I tried using the USB unsuccessfully and tried the firewire only to have that freeze the ipod and completely reboot my computer at the same time?! If anyone knows what is going on, I'd greatly appreciate any advice. I have taken great care of my ipod and would be surprised if it was something I had done to damage the unit.
    thanks MUCH in advance!
    ps. my nano syncs and adds songs manually just fine with the same computer...
    Message was edited by: ljdwing98

    Update:
    Any new news on this issue from anyone else?
    I left my iPod plugged into my PowerBook over night and when I woke it was functional. However, downloads from iTunes to the iPod take almost 3x's longer than they used to and there seems to be more errors than I've ever experienced (about 1 out of every 10 interfaces). Sometimes the error is that it can't write to the drive (iPod) and sometimes the error is that it can't mount the iPod. Also when the iPod is plugged in and displayed in iTunes, the "used" and "free" info is incorrect. I completely emptied my iPod and it says that I'm using -2.80 GB (impossible unless I've created a blackhole) and it says that I have 10.49 GB (capacity, under Get Info, is listed at 9.28 - which is were it's always been - it's a gen2 10GB iPod).
    Has anyone tried to format there iPod? Is this possible without harming the drive?
    Well, to sum it up my iPod is working but is having errors and bugs all over the place. If anyone has any new news I'd love to hear it.
    SPECS: iPod 10GB gen2, running 1.5(?), iTunes 6.0.4, PowerBook G4 800, OS 10.4.5
    Thanks

  • Computer freezes when trying to burn cds with itunes

    I don't know if this would help other people with issues related to burning cds with itunes but here it goes:
    My computer running Windows XP SP2 and itunes 7.6.1.9 suddently stopped burning cds via itunes about a couple of versions ago. Burning would start correctly, however the operation never completed successfully, in fact, the computer would completly freeze before getting too far. The computer had to be hard booted, meaning I had to hold the power button to kill it. The only solution that I've come up with that effectively corrects this problem is as follows:
    Close itunes
    Go to Start > Control Panel > Administrative Tools > Services
    Look for IMAPI CD-Burning COM Service and open it (double-click it):
    If not started, start it by clicking the Start button
    Select Startup Type as Automatic
    Go to Recovery tab and set first, second and subsequent failures to Restart the Service
    Click Apply and then Ok to close window
    Look for iPod Service and open it:
    If not started, start it by clicking the Start button
    Select Startup Type as Automatic
    Click Apply and then Ok to close window
    Restart itunes, try burning a cd from a playlist in itunes. There is no guarantee that this will solve your issue, but it is worth a shot, it has worked for me so far.

    Hi Toonz,
    My CD Diagnostics....
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Hewlett-Packard Presario V2000 (PP985PA#ABG)
    iTunes 6.0.2.23
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82852/82855 GM/GME Graphics Controller\Intel(R) 82852/55 GM/GME Controller
    IDE\DiskST94019A_______________________________3.09___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STDVD-RW_GWA-4080N_______________0C09___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: HL-DT-ST DVD-RW GWA-4080N, Rev 0C09
    Audio CD in drive.
    Found 16 songs on CD, playing time 55:24 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:22:62
    Track 3, start time 07:24:45
    Track 4, start time 10:48:10
    Track 5, start time 15:09:25
    Track 6, start time 15:38:00
    Track 7, start time 18:13:72
    Track 8, start time 24:20:60
    Track 9, start time 26:28:05
    Track 10, start time 31:11:25
    Track 11, start time 34:39:65
    Track 12, start time 36:13:22
    Track 13, start time 38:48:47
    Track 14, start time 43:30:57
    Track 15, start time 48:22:65
    Track 16, start time 50:48:10
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 10 16 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

  • LR4 freezes when trying to import photos

    Everytime I try and import photos LR freezes or takes forever to show source options.

    If you are using Photoshop from within iPhoto the following may help with the workflow.  However, we do need to know the answers to the questions posed by Terence and Larry to be able to help you.
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Screenshots are from PSE 10
    Note 1:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    Note 2:  editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

  • MacBook Pro Locks Up (freezes) when trying to import from iPhone6

    I have a MacBook Pro (13-inch, Early 2011) with the latest OS on it. Recently (regrettably) I did the update for Photos. First of all Photos is terrible compared to iPhoto. The layout and everything is just terrible. The worst is that as soon as I plug in my iPhone 6plus to import photos, everything locks up - totally freezes and the screen even goes black.
    How I undo the Photos update and continue with iPhoto without losing anything?
    Thanks

    I forgot to paste the details of the error log:
    Interval Since Last Panic Report: 105250 sec
    Panics Since Last Report: 13
    Anonymous UUID: AE0175B6-2007-4812-82BF-EFF25F7FD325
    Mon Aug 10 14:00:18 2009
    panic(cpu 0 caller 0x001B32B3): "Error 4 trying to transition CPU 1 to OFF"@/SourceCache/xnu/xnu-1228.15.4/osfmk/i386/acpi.c:154
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x5653fd28 : 0x12b4c6 (0x45f91c 0x5653fd5c 0x13355c 0x0)
    0x5653fd78 : 0x1b32b3 (0x46b21c 0x4 0x1 0x3f36a7)
    0x5653fda8 : 0x50615ffe (0x50615e50 0x3 0x246 0x131e9a)
    0x5653fdc8 : 0x5060a44c (0x6609800 0x2 0x0 0x6723300)
    0x5653fde8 : 0x43a8a9 (0x6723080 0x53d848 0xffffffff 0x0)
    0x5653fe38 : 0x44cb7f (0x6609800 0x4a78d4 0x5653fe68 0x6f39780)
    0x5653fe88 : 0x41acd1 (0x660f000 0x4 0x1d 0x2)
    0x5653fec8 : 0x41ad93 (0x660f000 0x0 0x1 0x66fb680)
    0x5653fee8 : 0x42174c (0x660f000 0x123d3700 0x0 0x6610f00)
    0x5653ff38 : 0x41bd73 (0x660f000 0x123d3700 0x66fb680 0x0)
    0x5653ff68 : 0x425d58 (0x66fb680 0x1 0x5653ff98 0x4255b1)
    0x5653ff98 : 0x425a3a (0x6610f00 0x0 0x12951128 0x41c978)
    0x5653ffc8 : 0x1a14fc (0x6610f00 0x0 0x1a40b5 0x73746b0)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleACPIPlatform(1.2.5)@0x50609000->0x50646fff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x505a1000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x505b8000

Maybe you are looking for

  • Officejet pro 8600 e all in one printer N911a

    For printing settings I see that there are front-to-back  or back-to-front  settings.  What is the difference? Online and hard copy instructions do not address this.  I was hoping to set the printer that on 2-sided copies the copy will emerge from th

  • My photoshop crash 4 times or more a day

    it crashes to the point that photoshop can't be open any longer. I have to uninstall and reinstall it agains. I have Photoshop CC with Maverick OS. Here are the dianostic report. I also submit the issue when it crash to adobe (the report box appear a

  • Copy text from PDF and paste to imessage

    Before iOS7 I would be able to copy text from a PDF file and paste it normally into a text message or imessage.  Now when doing the same thing it doesn't paste the actual text I copied, but it pastes as an html attachment.  Have I changed a setting o

  • Finally registering for a domain, what will i need?

    finally i am registering for a domain and web hosting with www.one.com what tools will i need to upload my site to my domain from i web?

  • Urgent Airport Update Needed!

    *Dear Apple;* I manage a coffee shop, probably the ONLY internet cafe in the city equipped with only Mac stations.  Well, in effort to go "Mac only", I got your little Airport toy and sure, it's got some fun features, but it's missing basic features