Ipod frozen at language screen, tried 4 R's, computer says device malfunc
Last night I tried to put new music on my ipod, but right as it was ending, it flashed a message saying that it had failed. I checked the music on my ipod and it had indeed failed to update my music. So, I tried resetting it and that resulted in my device being frozen on the language screen. I checked here and decided to try and let the battery wear down and then connecting it to a different computer. So, I tried connecting it to my computer here at work and my computer is failing to recognize the device and saying it has malfunctioned and that I should replace it. I've tried resetting it and then reconnecting it to the computer and that has failed. I re-installed iTunes and then reconnected the ipod and that has failed. (Yes, I'm productive at work today) Do I need to send it in to be repaired? It's only a year old. It was working exquisitely prior to me trying to put new music on it.
I have a 30GB iPod...last night it froze for the 2nd time. I am using it on my motorcycle when this happens...attached to a "2 Wheel Tunes" stereo system. Is it freezing because of the vibration of the bike? Any answers...from ANYBODY will be greatly appreciated!!
Similar Messages
-
IPOD Frozen on Language Screen
After restoring my IPOD I am now stuck on the language screen. I try resetting and it still just shows the language screen. Can someone help?
Hello All;
Same here, but I just received iPod from Apple.com store....resets o.k. but comes right back to frozen in language screen. attempted reset several times, also restore with iPod updater...no luck. Did i get a LEMON????? Unit works o.k. in ITunes, I can save and read to it in disk mode. HHHEEELLLLLPPPPPP!!!! -
nano 7th gen ipod frozen on language screen after resetting to run on windows from mac. Have tried apple reset with no luck. Can access language change but DONE button does not respond! Any help would be very welcome.
Hey bluefly101,
If you are having an issue with your iPod nano, there are useful troubleshooting steps available on this page -
iPod nano - Troubleshooting - Apple Support
In particular I would suggest resetting your iPod -
Reset your iPod - Apple Support
And if the issue is not resolved, it may be necessary to restore the iPod -
Restoring iPod to factory settings - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L -
2 ipod nanos - frozen on language screen
We have 4 total ipods and 2 from 2008 (4th gen) are both stuck on the language screen. I have tried to reset both (multiple times), restoring, using different ports, updated to latest itunes, tape, etc. It seems strange that the earlier models are working perfectly fine. What can I do to get them unfrozen! I'm very frustrated!
Hello All;
Same here, but I just received iPod from Apple.com store....resets o.k. but comes right back to frozen in language screen. attempted reset several times, also restore with iPod updater...no luck. Did i get a LEMON????? Unit works o.k. in ITunes, I can save and read to it in disk mode. HHHEEELLLLLPPPPPP!!!! -
My ipod nano remains frozen despite following all reset directions and installing new ipod software udater 2006. My nano remains frozen on "language" screen with "English" highlighted. Prior to installing the updater, it was frozen on the menu screen with "music" highlighted. It is charged to full power. My computer and itunes recognizes it and will download songs to it, according to my computer.
I'm not sure what to do next.
bbkkWell you said....
"Then the "language" screen reappears and I'm frozen there again."
.....so I thought your iPod was frozen on that screen. That's what you've been saying throughout this thread without any mention of the iPod screen turning off after 30 seconds.
However, since the instructions about leaving the iPod to drain for 24 hours are contained in the Apple document "My iPod won't turn on", I think it applies to your situation also.
If this doesn't solve the issue, it needs service, or at least visit an Apple store and let them take a look. -
ipod has a white screen. tried to reset it. still has a white screen and now all of my music is gone
Hi PINKPASSION,
If you are having issues with your 2nd Gen iPod Nano, you may want to try the troubleshooting steps from the following page:
iPod nano (2nd generation) Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/nano2gen/
Regards,
- Brenden -
I have an Ipod nano and the screen is just white and says ok to disconnect with a black tick on. Can anyone suggest what I can do?
Reset the Nano.
How to reset iPod
B-rock -
Ok i got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please
Try placing in DFU mode and then restoreing.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have a frozen iPod Nano 4G. After syncing it gets stuck at the language screen and cannot proceed any further.
I have tried holding down the Menu and click buttons for >6 seconds, without luck. Have reset to factory settings and re-syncd, but it keeps getting stuck at the language screen.
I suspect it is the latest version of iTunes causing the problem, as I just installed it a couple of days ago and this is the first sync since the update.
24" Intel iMac 3ghz C2D, OS X 10.6.7, iTunes 10.3.1 (55).+Do you have access to, another Firewire enabled Mac, that you could use, to attempt a retrieval of data, using Firewire Target Disk Mode?+
A question on this Firewire Target Disk Mode - If I could get access to another Firewire enabled Mac and connected the two together, host #2 to Target #1, with a Firewire cable (6-pin to 6-pin), and power the two up, even though #1 would not be booted up to the desktop but just have the hard drive powered up, would the hard drive of #1 be accessible to #2? If so, would I be able to perform any repairs or do anything to the drive to enable it to bootup the #1 computer? This would be similar to when I remove and hook up a 2.5" IDE-ATA PC laptop hard drive to another PC computer, usually a desktop, via a drive adapter and USB 2.0 cable, as an external drive. When I do this in a PC, it's usually one that is unable to boot up to Windows due to malware or other problems. I am able to see the files and folders on the #1 computer's hdd and then clean out any malware (virus/spyware), or add/replace any corrupt/damaged Windows files that might be keeping the #1 computer from booting up. After that, I can usually return the hdd to the #1 computer and boot up normally to finish any clean up or change any settings.
I had considered taking the hdd out of this damaged iMac computer and attempting to hook it up with a PC, but after seeing how difficult it is to get to this hdd and not sure of what I'd do when and if I did get the two connected together, I put the idea way back as a last resort. I wasn't sure I'd even be able to see any folders or files on the Mac hdd due to the differences between OS X and WinXP. And, after reading that Macs aren't susceptible to malware, I didn't know what I would be accomplishing. -
My ipod classic has frozen on language screen going to restore or reset does not help
My Ipod classic has frozen on the language screen. Resetting ipod has no effect and going to reset of restore on I tunes also has no effect. Anyone with any ideas.
If restoring has not helped then it is a hardware problem and you will need to get it serviced.
-
So I just wanted to hook up my new 5g, 30gig Ipod and it is stuck on the language screen where it asks to select a language. I tried pressing the play, center button, even checking the hold button. The ipod is charged what am I missing thanks
Out of curiosity, did either or both of you use the iPod before connecting it to your computer? Or did you just take it out of the box and plug it into your computer when this happened?
Nikki -
IPOD Stuck on Language Screen after restoring
My IPOD, a 30GB video IPOD purchased a few years ago, has been getting stuck and not able to go further for the past couple days. I tried all the options and ended up doing a restore - but the restore has caused it to lock on the Language Screen.
I have tried everything - I read online that it may be broken inside but I haven't dropped it or anything and it was working find? Totaly confused and Upset!See if you can find a find using a Mac computer, and to a Restore there.
-
IPod frozen on diagnostic screen
For a few days my iPod has been frozen on a screen I've never seen before. It says "Accessorize Test" across the top and below it says:
Please plug FW
LCD IC : 1
FWPWR : 0
None of this makes any sense to me, and, like I said, I've never seen this screen before. I've tried resetting my iPod, but it won't respond. I've plugged it into the computer as well as a wall charger, but to no avail. I've run out of ideas and I'm hoping someone can help me!
5th Generation iPod Windows XP Pro
5th Generation iPod Windows XP ProMy 80 gig buzzes and clicks when I try to use it. Someimtes plays a bit of a song, then stops. When plugged into the computer it does not show up in itunes. If I go to My Computer it might show up as my f drive. If I click on it, it freezes every program that is running, including the My Computer window. Doesn't work in any of three players we have. Worked in all of them a week ago. Yes, we did update itunes. Yes, we tried to restore. Bootom line, if I plug it in, it freezes anything that is running as soon as I click on the ipod. SO we can't take any other correctie steps. Oooh. It just gave me a frowny face and sent me here to itunes support. And why isn't there a genius online instaed of user forums? Any hints? SOunds like this: Buuuuuz, click, click, buuuz, click, click
-
IPod: Frozen at boot screen...for 14+ HOURS!
Last night, at 10:00 P.M., I rebooted my iPod Touch (1st gen.) because some apps were crashing. However, as of right now, over *14 hours* later, my iPod Touch is STILL in the boot screen, with the Apple logo frozen on the screen. Is there something I'm doing wrong?
Message was edited by: KantatzuI have the same problem!
When I plug it in, iTunes doesn't detect it, and when it makes the little beeping sound, it just doesn't respond. I do not want to get a new iTouch!
EDIT EDIT EDIT:
I have found a solution to this problem. Kind of complicated. DO NOT EMAIL ME AT THE EMAIL ON MY PROFILE.
Email me at [email protected] if you want the method, I'll gladly give it to you.
Message was edited by: ME LOL -
My computer will not let me restore my i pod touch. My daughter forgot the password and we have not been able to use it. Someone told me to restore it, I tried and the computer looks like it is downloading for a couple of minutes but then says download not complete.
Try here:
iOS: Device not recognized in iTunes for Windows
Also include manually placing the iPod in Recovery mode and then try a restore
Then try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Further, try another computer to help determine if yu have a compter or iPod problem.
Maybe you are looking for
-
when i try starting my IPod it won't start, the Apple logo comes up for a few seconds,and then. it just shut off . I tried to charged it through an outlet, the IPod didn't eve charger so I tried to restore my setting in my computer, i tunes won't
-
Extra column to be added while importing data from flat file to SQL Server
I have 3 flat files with only one column in a table. The file names are bars, mounds & mini-bars. Table 'prd_type' has columns 'typeid' & 'typename' where typeid is auto-incremented and typename is bars, mounds & mini-bars. I Import data from 3 files
-
IPhoto 08 ' converted video to stills
I'm having a huge problem with the new iPhoto. Recently, I upgraded to a new MacBook Pro and started to import my backup iPhoto library. As I started to organize my photos I noticed that about half of my video clips were converted to still images. Th
-
Problem with scrolling after rotating image
Hi, I am trying to write a simple image viewer in flex. I came across a problem which I've been trying to solve through the past 4 days. In my example I want to rotate the image and then scroll around once its been rotated (Say after the user would z
-
CUCM control location address?
We are currently running CUCM 7.2 and are running into a problem. We have 2 building that are connected via bridge. The buildings are tied together via Fiber and both buildings operate off the same data center. If user A calls 911 from their desk and