Ipod Frozen With A Blank Screen

Please Help Me I Have A 30G Ipod I Was Installing The Update But My Ipod Froze I Disconnected It And Now I Have A Black Screen I Tried EVERYTHING

just doublechecking da-snowman. have you tried the technique from the following document?
Fifth Generation iPod has a blank backlit display and beeps 3 times
(it's applicable to some blank black display issues too.)

Similar Messages

  • Ipod touch with a blank screen

    My Ipod touch had a full charged battery and was connected to itunes then I ejected it and the screen went blank. The screen wouldn't turn on and when connected to itunes it said it couldn't connect because the ipod was password protected. With the screen blank i touched the home button and then typed the password as if i could see what I was typing, I then connected it to itunes and it did sync, but still no screen response. I proceeded to restore the ipod and that solved the problem the screen turned on when the itunes was preparing the ipod for the restore procedure.

    See Here...
    Frozen or unresponsive iPod touch
    Try this First... You will not lose any Data...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    If that does not work... try letting the battery fully drain.
    Then Charge for an Hour and try the Reset again.

  • My ipad2 is totally frozen with a blank screen

    This morning I emailed a  picture to a friend. After than I couldn't access my mail or contacts app. Now my ipad is totally frozen. I can't turn it off or restore, etc. I bought it about a month ago. I''m not sure what to do with it.

    Thanks. I had been holding down those buttons but I guess not for long enough. Thanks so much

  • My ipod touch has frozen with a white screen. None of the buttons will work to turn it off or take any action. Holding down buttons for 10 seconds plus does not work.Help

    My ipod touch has frozen with a white screen. The on/ff and sleep buttons will not work whether pressed for a moment or held for more than 10 seconds as per help pages. When connected to computer it is not recognised and no indication in "devices".It has been working perfectly from Christmas until now. Was watching a TV prog via BBC iplayer when the image and sound froze for about 5 seconds then just white screen. Help

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • How do I fix my ipod with a blank screen?

    How do I fix my ipod with a blank screen?

    Start at # 3
    1-  iOS: Not responding or does not turn on
    2  Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    4  Try on another computer                            
    5  If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Ipod frozen with white screen

    My ipod has stuck and frozen with a white screen when i go to start it up. It will not shut off and will not respond to any touch movements. When plugged in to the computer, I-Tunes does not recognize it.  Please help!

    I have had it two years and this is the first issue. My main concern is that the computer does not recognize it in order to reinitialize it. It wont shut off, it wornt do anything, I am just loking for a guide before I have to send it in for repair/replace... I am not feeling much good from the boards, but I am gonna be patient and see if someone stumbles across my please for help-- this cant be the first time someone has had and fixed this problem....

  • Help I just get stuck with the blank screen and the white circle

    help I just get stuck with the blank screen and the white circle after i erase all content and setting
    i dont know how to do pls help.

    Try connecting the device to your iTunes library and restoring it.  If necessary place the iPod into recovery mode using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    Dear Jean:
    It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
    Open System Preferences.
    Choose the Displays Icon
    There will be several tabs to choose from pick Arrangement
    Drag the toolbar to desired display
    Let me know if this helps at all!
    Lance

  • The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes

    The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.

    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • 7961G-GE stuck in constant reboot with a blank screen

    Hi all,
    I just bought a used 7961G-GE and attempted to implement it into my current running CME environment. For some reason my 7961G-GE is constantly rebooting with a blank screen upon receiving power from my 3550 switch. I currently have 2 7940's and a 7961G that have registered without any issues. I tried to debug tftp event's on my router to see if at least my 7961G-GE  was able to contact the TFTP server but I get no results at all. I also did  a dhcp bindings check and it looks like the 7961G-GE phone is unable to get an ip address either. I have the proper option 150 configurations as my other phones are able to reach the tftp server without any issues. I've also uploaded and tried firmware versions 8.2 through 8.5 and assigned the proper file to the load command. When I do a "more system:/its/vrf1/XMLDefault.cnf.xml" to see if the command was executed, it shows the correct file within the open and close tags of the proper load information tags. This is just really baffling to me because I'm getting no response at all when I try to debug the events with this phone with the exeception of it rebooting every few seconds with a blank screen. I do get an error message when I do the load command that says "
    LOAD COMMAND ERROR:cnf-file location system is not supported,Plese use flash|slot0|tftpUpdating CNF files", but again, when I look at the XML files that all my phones request they all show the proper info within their tags including 7961G-GE.
    Any pointer's as to why this is happening?
    Thanks
    -Jason

    Maybe the unit was in the middle of a complete flash reset when the seller pulled the power.  Normally a flash reset takes about, wait for it, an hour.

  • Laptop only coming up with a blank screen after set-up?

    Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
    Cheers

    Hello @15_,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My IPad Air is frozen with a white screen and Apple Logo on it.

    My Ipad Air is frozen with the white screen and apple logo.  I've tried resetting it several times and that doesn't help.  I tried connecting to ITunes, but it isn't recognizing the device. 
    The battery is fully charged, at least for now, so I am not sure what else to try.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My ipad is frozen with a black screen with a picture of a cord leading to the itunes logo.i tried to shut it down and the app;e icon comes out but again the cord leading to the itunes icon keeps on coming out. what should i do ?

    My ipad is frozen with a black screen with a picture of a cord leading to the itunes icon. i tried to shut down my ipad but the turn off icon wont show instead the itunes icon with the cord keeps coming out everytime i open my ipad. what should i do ? and i dont want to lose my pictures, videos and other documents in my ipad please help me ....

    I hope you have a backup if you don't want to lose your iPad contents. You have to restore the iPad now using iTunes on your computer. That's what the message on the screen means.
    Take a look at this.
    http://support.apple.com/kb/ht1808

  • I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help :(

    I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • New iPad Air 2 with a persisting blank screen. Support site suggests a restore after turning off 'Find my iPhone' on the device. How can I do this with a blank screen?

    New iPad Air 2 (December 2014) with a persisting blank screen. Support site suggests a restore after turning off 'Find my iPhone' on the device. How can I do this with a blank screen?

    Thanks JimHdk,
    After a little more searching across various online resources I was able to cure it by holding down the home button and the on/off button for 10 seconds to restart it and it all came back with a clear screen.

Maybe you are looking for

  • Financial account vs. account

    we've implemented using the crm on demand base version, not the financial version. what i did was load the accounts and link them to the contact as the retail consumer. however, I now read that the financial version is better for a retail financial s

  • Colour problems when burning  dvd

    Having created 4 slideshows in one project in idvd, I burnt the project to dvd, when viewing the dvd on tv through dvd player, the colours are all wrong, red is blue, blue is brown, yellow is blue. Can anyone help me solve the problem please

  • A question about the "Third-Party Root Certification Authorities" X509 store

    Hello All Can someone please help me with the following question. Reading some MS documentation I see MS have a program called 'Microsoft Root Certification Program" where by if a third party ACME for example create a Root CA and it passes this progr

  • How to add links to portlet header ?

    I want to add a print link to the portlet header, along with Customize, Help, About etc Is there any way to do this ? (Using PDK, java or pl/sql)

  • Photoshop SDK

         I am looking for someone and/or a company who has experience writing SDK in Photoshop.  If anyone has a reference that would help a million.  Thanks.