IPod function looses place when playing in the background

I have an iPhone 3g and since getting it I've been able to cause the iPod to loose its place if I run an application and let it play in the background. If one song is playing and I start any other application in the phone (even built-in ones like the browser) that doesn't cause the iPod to stop playing music the iPod will keep playing and if I use the browser or other apps long enough for the ipod to move to the next song and I return to the iPod app the time and track information will reflect the time and song that was playing when I started the other app! This is particularly noticeable in long files like audio books where you are listening to chapter 5 when you start the browser and go back to the ipod sometime during chapter 6 and the ipod still shows you at some point in chapter 5. Anyone else noticed this? I've also had it not remove the 'new' (blue dot) from podcasts unless I pause it then resume playing.

I've seen both these issues when listening to podcasts. also, i've noticed that when this issue is occurring, fast forward sounds like it's seeking forward but when you let go of the button it resumes in the exact same spot from where you were before you push fast forward.

Similar Messages

  • Degenerative quality when playing in the background

    I like to play itunes in the background while I play games, but for some reason after a while it begins having little chirps and bits of static, eventually it'll reach a point where the music is totally unrecognizable. Only when playing in the background of games though, it'll work fine everywhere else. Any Ideas?

    update: it happens outside of games now too. I guess I'll just reinstall and see if that helps

  • Is there a way to make the ipod touch not lag when playing modern combat 3 on ios 6

    is there a way to make the ipod touch not lag when playing modern combat 3 on ios 6 because when i play it laggs badddddddddddddddddd any suggestions or help

    Hey Harold the Lion Tamer,
    Thanks for the question. I understand that you are experiencing issues with your iPod nano (7th generation). The following resource outlines basic troubleshooting steps, and tips on the next best steps if your issue is not resolved:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    The Five Rs: Reset, Retry, Restart, Reinstall, Restore
    Remember these five basic suggestions if you have an issue with iPod nano. Try these steps one at a time until the issue is resolved. If one of the following doesn't help, read on for solutions to specific issues.
    - Reset iPod nano. First, make sure iPod nano is charged. Then press the Sleep/Wake button and the Home button for six seconds, until the Apple logo appears.
    - Retry with a different USB port if you cannot see iPod nano in iTunes.
    - Restart your computer and make sure that you have the latest software updates installed.
    - Download and reinstall iTunes.
    - Restore iPod nano.
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    Thanks,
    Matt M.

  • ITunes skips the first milliseconds when played from the beginning..

    I have created some songs from my DAW that I wish to playback in iTunes.
    But it seems skips the first milliseconds when played from the beginning.. Probably the first 100 milliseconds.
    It plays correct in Quicktime Player.
    Anybody suggestions?

    Sorry, if you restored your iPhone from a backup of your iPod then your iPhone will end up looking just like what was on your iPod. Everything else will be deleted and, if you have no other backup, it is just gone.
    The restore function is not incremental. It does not add or merge content. It simply replaces every thing on the restored device with what is in the backup.

  • I have a 5th gen ipod nano that freezes when playing songs. i can't turn off, change songs, turn volume down. song stays stuck and nothing works at all. any ideas??

    i have a 5th gen ipod nano that freezes when playing songs. i can't skip, turn down volume, turn ipod off. it simply screeches as the song is stuck at a specific point. any suggestions?

    You have 2 options:  #1 - iPod Repair Tutorials
    #2 - take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.

  • Sterio balance is off, even when playing out the dock.

    The other day it just started on my iPod Classic, the audio comes out at 100% on the right channel but only 50% on the left channel. It plays this way though headphones but also when played though the dock connector hooked up to speakers of over my iTrip in the car. Is there a setting for this? I tried reseting the ipod but it still does this. Do I need to restore the ipod or is there a setting hidden somewhere to change this? or is it broken?

    Okay, I've restored the iPod but the problem persists. The left channel plays at only half volume. any other ideas? It's still less than a year old, do I need to bring it in for fixing?

  • Some of my songs are listed twice on my iPod itself.  However, when I plug the iPod into my computer, the songs don't show up twice in iTunes when I click on device/music. How do I get rid of the duplicate songs on my iPod?

    Some of my songs are listed twice on my iPod itself.  However, when I plug the iPod into my computer, the songs don't show up twice in iTunes when I click on device/music. How do I get rid of the duplicate songs on my iPod?

    that is odd! that should not be happening.
    Are you syncing your songs right off of itunes itself? because it should be syncing over to the ipod however it is listed in itunes.

  • Why would my video clips be running too fast when played on the monitor panel?

    I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
    My main question is: "why would my video clips be running too fast when played on the monitor panel ?".  This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline.  I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline.  They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes.  I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
    The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ?  Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
    After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips.  They are in their original state.
    Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
    Help would be greatly appreciated.

    Yes, that is what the problem was.
    Although the video camera on my Nokia N8, mobile was capturing at 25fps,
    for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps.  Once in Interpret Footage I was able to change the fps to 25.
    Thanks for the help.

  • I got a usb charger for my 4th gen Ipod touch that at first allowed my to charge and transfer music from my laptop to the Ipod now nothing happens when I plug the usb

    I got a usb charger for my 4th gen Ipod touch that at first allowed my to charge and transfer music from my laptop to the Ipod now nothing happens when I plug the usb cord and Ipod into my laptop. Its mac so it is an apple system. I am wondering how I can fix this problem I am not very good with techy stuff so this is very confusing how it was working and it just stopped.

    Hi johnsmiff99,
    That is never fun when your iPod touch does not show up on your Mac. Take a look at the article below to walk you through on getting it to show back up on your iTunes. It is very easy to read so you wont feel overwhelmed with to much techy jargon. Let me know if you get this worked out. 
    If you don't see your connected device in iTunes for Mac
    https://support.apple.com/en-us/HT203979
    Take it easy,
    -Norm G.  

  • I have similar problem, but mine doesn't sound like a loose screw, more like the battery or vibration component is loose. When I shake the phone left to right abit I can feel that it's around the top area.  Very annoying, besides that it works fine. Gonna

    I have similar problem, but mine doesn't sound like a loose screw, more like the battery or vibration component is loose. When I shake the phone left to right abit I can feel that it's around the top area.  Very annoying, besides that it works fine. Gonna go to apple tomorrow maybe to ask.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • I make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

    i make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

    What you could do now is break up your video into smaller parts and render them out, then assemble them again as a whole.
    I know this is not the best fix, but it might work.
    You can duplicate an edit in the main screen, then delete the last bits and export,
    do the same for the other half.
    Then import the two bits (or more if you need) in a new edit.
    Out of curiosity, can you post what format the video is in?
    Copy a video straight from the camera to your computer.
    Open it in Quicktime player, and with out playing type Apple + i
    or Control + i for PCs
    It should tell you lots of info about the video, and might help us to see what is wrong.
    This is what it looks like:

  • My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect. It never worked after that.

    My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect but showed the battery getting charged. Sometime later it said OK TO DISCONNECT. It never worked after that. Please help /guide to restore...

    Hello Harrywahi,
    Sorry to hear about the trouble you are having with your unresponsive iPod classic.  I found a resource that I think would help in a situation like this.
    I recommend following the steps in this troubleshooting assistant:
    iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • When i open firefox browser the pacman song starts playing in the background??

    when i open firefox browser the pacman song starts playing in the background??
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; WOW64; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.21022; .NET CLR 3.5.30729; WinNT-PAI 11.09.2009; .NET CLR 3.0.30729)

    Hi everyone!
    I will be posting this in all "weird sounds topics" just so you know.
    These "weird" sounds you hear are from pacman.
    Today is Pacmans 30:th birthday and google wanted to celebrate by making the pacman game playable at their website "www.google.com".
    You will notice that their logo is changed to pacman with the map swapped out to the text "google".
    The game will probably just be here today so all noises will be gone by tomorrow. If you don't want to hear the sound today then please don't visit google or just turn your volume down.
    Yours sincerely: LAwLz

  • Siri quits when I try having her/him read out loud in iBooks. Any suggestions? I also cannot listen to siri read out loud when Im in the car on Bluetooth without having music play in the background.

    Siri quits when I try having her/him read out loud in iBooks. Any suggestions? I also cannot listen to siri read out loud when Im in the car on Bluetooth without having music play in the background.

    Siri quits when I try having her/him read out loud in iBooks. Any suggestions? I also cannot listen to siri read out loud when Im in the car on Bluetooth without having music play in the background.

  • Why the game: Injustice, when play with the challenge will direct close the game? Please fix it.

    Why the game: Injustice, when play with the challenge will direct close the game? Please fix it.

    You need to speak to the developer. They should have some sort of contact link on their iTunes page.  This is just a user to user tech support forum, no one here has any sort of control over apple or what developers do.
    The game developer may also have some sort of fix on their site, so look there.

Maybe you are looking for

  • BADI/USER EXIT for FB60

    Hi, please can you tell any BADI or USER EXIT that are available for FB60 Transaction code. Thanks cra

  • I want to use maps in jsf?its not working help needed

    Hi i am trying to use map and area in jsf. i added the tablib demo/coponenets but it says <d:map> is unknown tag do i need to add any jar file for making it work please guide me thanks in advance.

  • MSCA-Receiving PO items from Scanners- *Online transaction fail*

    Hi, While receiving PO's from scanners,getting the following error - "Online transaction fail"..issue is only with one OU..i can receive in another OU in same instance...also issue is specific to one instance. Has any one encountered such issue? Rgds

  • Converting String to UnitValues?

    Hello, how would i convert a string object to a UnitValue object? Say i have a an editbox.text where the user entered the string "2 in". How do i make it a unitvalue so i can convert it to another unit? regards, Stephan

  • WRE54G Range Expander -- Not very powerful

    Here is the situation. I have a house that is laid out from north to south at about 60 feet, with two walls between one bedroom on the opposite end from the access point, and the same with the other bedroom except it is not in direct line with the ac