IPod function / standby bug?

I'm not sure if this is my fault, or the phone's, but since I can't find any settings relating to it.
Sometimes when my phone goes into standby (i.e. the display shuts off and it locks) it starts playing whatever the 'now playing' song is in the iPod. Even if I pause the song and exit the iPod back to the main home screen, it still jumps back to a song and starts playing. It only does it when there are headphones plugged into it.
Anyone else encountered this issue?

I've got the same problem where iPod would start on its own even tho I would exit it...it happs when the headphones are in and I own a pair of Bose in-ear headphones so first i thought it was the headphones but then I tried on apple headphones and I m still having the same problem...anybody know if that firmware update 45 could fix this issue??

Similar Messages

Can you have two "ipod" functions on one phone?

I listen to self help audio (John Maxwell/Zig Ziglar type stuff) and sometimes I'd like to hop over to regular music and then be able to come back to my audio content without having to start over. Is there any way to have two ipod functions on the same phone? Any settings or apps from the app store that might let me have two ipod functions run on the same phone?

Try to tag the self help audio in iTunes as an Audiobook instead. Then sync it as an audiobook.
Audiobooks in the iPod player can remember last position so you don't have to start over.

About Ipod Functions of Iphone on Pioner Car Kit

Hello guys,
I have a problem with my iphone about of Ipod functions. So, I have a car and there is Pioneer music kit (CD/USB/MP3 Player) on car. So, When I put my "ipod touch (2th generation and 3th generation)" to that, there is no problem, everything working, I can see playlist, play musics, change tracks, all of functions working on control of pioneer music kit. It's already should be like that and there isn't any abnormal situation.
But;
When I put my iphone to that kit, I never play and see my music, also the pionerr music kit haven't seen my phone like ipod touch. Also, I have checked with other iphone's but I have got same result every end of test.
So, Do you have any information/experience or suggestions about that How can I solvbe that?
Tested : Ipod Touch 2th. Generetion : Working
Tested : Ipod Touch 3th. Generetion : Working
Tested : Iphone 3G : Not Working
Tested : Iphone 3GS : Not Working
I haven't test with Iphone 4 until now because I don't have
Note : All of test has been done by USB connection!

keep taking it on and of the usb until a message appears then press play and leave for a few seconds- that used to work for mine b4 it broke. hope that helps

In-Pocket iPod Function Issues

It's next to impossible to control the iPod function on the iPhone when it's in your pocket for a few reasons:
1. It's very difficult to locate the forward/reverse function on the screen when the iPhone is in your pocket.
2. It eventually locks, in which case you need to perform the additonal task of unlocking it without looking.
3. The iPhone lays flat in my pocket. When it lays flat, it goes into cover flow. There aren't even forward and reverse functions in cover flow!
This is a huge disadvantage when the iPhone is compared to the old iPods. My proposed solutions are:
1. Create a software update which allows you to turn off cover flow (even though you'd still have a hard time finding the forward and reverse functions when the iPhone is in your pocket, and it still would lock).
2. Put physical forward/reverse buttons on the next iPhone.
3. I understand that Apple used to make earbud headphones with forward and reverse controls on them, but do they still make them? Even if they did, I don't like earbud headphones so that wouldn't help me.
WDYT?
PS - I don't like to turn locking off because if I forget to turn it off it stays on and drains the battery and heats up =(
Message was edited by: 2xUeL

Happy to help.
In addition, this cable has the button built in to use the click/double click functions. You can use it to plug into any pair of headphones you like so no need to use the buds.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=8C9 65391&fnode=home/shopiphone/iphoneaccessories&nplm=TN544LL/A

IPod function on iPhone 3GS crashing since music purchase

Hi,
I have updated my iPhone 3GS with OS4 and after purchasing a new song in the iStore, the iPod function no longer works.
When selecting the iPod app, the screen opens and then shuts down about two seconds later.
I can no longer access my iTunes, please help! Thanks

I am having exactly the same problem, tried to buy song through Itunes at weekend, only for it to fail due to poor network coverage. Later try ipod function on iphone this week and seemingly it just crashes every time. Have reset the iphone 50+ times probably now. Very frustrating....

Problem with ipod function

the ipod function on my ipad fails to start up... I press the button the screen comes up for a second or two and then disappears. When the Ipad is connected to my computer, I can see my music and podcasts that I've loaded into the iPad on my computer's itunes

Hello,
The iPod app may be frozen...
Press and hold the Sleep/Wake button on top of iPad for a few seconds until a red slider appears, then press and hold the Home button until the application quits.
If that doesn't help, try resetting your iPad.Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
Carolyn

Using iPod function with Bluetooth

I recently bought a subaru impreza with a usb connector in which I plug in my iphone. The radio has Bluetooth so I can take calls through the stereo as well
I issue is that when the cable is connected and the Bluetooth turned on, for some reason, I cannot access the iPod controls through the car dashboard, like looking through the iphone library and music folders. But when I turn off Bluetooth, The iPod function works again. But then I cannot take any calls through the car dashboard.
I just don't know if there's a way to have my iphone plugged in to use the iPod functions, while at the same time to have Bluetooth turned on so I can take calls?
I have no idea if I made sense.

If I recall things properly, you can't play music with a bluetooth headset. You need a bluetooth device which supports A2DP or AVCRP. My Jabra BT620S supports both methods, so I can pair it with the cell phone using the headset mode and with the iPod using the A2DP mode to play stereo audio back. My cheap LG stereo headset is similar. My more expensive Motorola H12 only supports the headset mode so I can use it for the phone, but not for the iPod playback.

IPod function: fine-grained time movement

Maybe I just haven't gotten this figured out yet, but I'm having trouble moving ahead and back in audio with any precision.
With a standard iPod, I'm used to hitting the center button, and then being able to navigate exactly to the time in a podcast (or video or song or other item) that I want. It's very easy.
On the iPhone, in the iPod function, I know there are two ways to move forward and back.
One is to hold down the >| or <| buttons for a second or two so fast-forward starts. But this has a few drawbacks: The fast-forward or rewind functions take a while to kick in, and then they automatically speed up in a way that is a pain if you're shooting to move forward 30 or 45 seconds. First they move too slowly. Then they move too quickly. Also, if your touch isn't just right, they can be interpreted as a quick push and can take you to the beginning or end of the clip.
The other is to scrub by hitting the album art and then moving the revealed slider. However, this is a pain because in something like a 50-minute podcast, I can't figure out how to move forward or back by less than about a minute at a time. One can't just zero in on the time one wants.
Has anyone tackled this problem and made the iPod function on the iPhone behave more like a true iPod?
Thanks.

You have described the only two ways to move back and forth within a track. I certainly agree with you that a finer control, similar to the iPod, would be desirable, and I encourage you to pass your thoughts on to Apple at http://www.apple.com/feedback/iphone.html

I can not update my ipod touch, brand bug 3259. how I can solve?

I can not update my ipod touch, brand bug 3259.
how I can solve?

Have a look at this discussion...
https://discussions.apple.com/message/16363110#16363110

Certain common iPod functions not in iPhone?

This may have been covered elsewhere, but I can't seem to find it in a search...
I've noticed that two things seem to be missing from the iPod function of iPhone:
-- A progress bar showing relative time remaining on a song or podcast, as well as actual time remaining. This was a help in searching through a song or podcast for a particular segment.
--iPod in the iPhone doesn't seem to remember where you 'left off' in listening to a song or podcast, like iPod did. If you didn't finish a podcast & returned to it later, even after a re-sync or playing other podcasts or music, you could count on it resuming where you left off. iPod in the iPhone usually starts you back at the beginning, making it really hard to remember/find where you were in a long podcast.
Both of these functions were a welcome part of my regular iPod.
Am I missing something, or are they really not there?
Randy

A progress bar showing relative time remaining on a song or podcast, as well as actual time remaining. This was a help in searching through a song or podcast for a particular segment.
Not sure about Podcasts but this is available for songs.
When a song is playing, single click on the album art or the album art area if there is none and this information is available directly below the Name of the artist and song.

IPod functions stops working.

The iPod functions stops working after 5 seconds. I have set the phone with no luck.

Same thing happened with my mine after downloading a new song from my iphone. I just plugged it into the computer and even before it synced it was working again. Hopefully this helps you.

Slow iPod function on iPhone 4S

The iPod function on my iPhone 4S is running really slowly and being glitchy. It takes a while to open and forever to select a song or playlist (and sometimes instantly quits). Sometimes when I go to the list of playlists, sometimes it repeats one of the playlist names dozens of times. It is strange because the "loading wheel" at the top of the screen spins and spins like the phone is working really hard and using data to download something, but I'm playing songs that have already been downloaded from iCloud. I have tried restarting and quitting the application many times to no avail. I don't suspect phone damage because everything else runs perfectly! Any suggestions? Or should I just bring it in to the Apple Store to check for a hardware issue?

I'm having the same issue, which just started within the past few days. 3G is unusable due to the slowness. I've been in areas which I frequent every day, which USED to have great speed, and now are practically dead---so it's not location. My phone is iPhone 4s, AT&T---so it's not just Verizon and their service. Everything is fine in WiFi. I've done everything except restore the phone. I've even uninstalled and reinstalled apps like FaceBook or Words With Friends to see if it was issues with the apps, but that was unsuccessful.

Listening to iPod functions with a bluetooth headset?

I paired a motorola headset with the iPhone and was able to use it to take a call. Is there a way to use it to listen to podcasts and music through the iPod function?
Thanks!

The iPhone does not support bluetooth stereo, also known as the A2DP (Advanced Audio Distribution Profile) or even AVRCP (Audio/Video Remote Control Profile).
Maybe future updates might include bluetooth stereo support.
For more info on A2DP and AVRCP, visit http://en.wikipedia.org/wiki/A2DP .
iMac 17" 2GHZ C2Duo 2GB RAM 160GB HD Mac OS X (10.4.9)

Questions regarding itunes/ipod + found potential bug (itunes 7 + 5G ipod)

I'd love to be proven wrong here.. but...
Okay I've got an iPod 60GB video model (5G) and using itunes 7.0.2 on the imac and powerbook...
now... my main storage point for music is the imac (so I automatically sync the ipod to itunes on the imac) and I like to take the ipod and powerbook with me to friend's places or what not.
I found it stupid to have two identical libraries on two of my computers, so I got rid of my music collection on the powerbook (as all of it is on the imac). Now.. the dillema here, or dillemas I should add...
a) before I used to use automatic sync, I ticked "manual manage music and videos" and thought life was peachy.. until I was at a friend's place, with my laptop, and wanted him to have a listen to a couple of tracks from the ipod, so I plugged it in, fired up itunes and it worked... however!
(BUG RANT) The view mode settings keep reverting back to it's default when ever I plug the ipod back in again! as in "Show Browse" or cmd-B, which I want kept there when I listen to music, having to press cmd-B every time I want to scroll through my list is very f**ng annoying.
Also having to change it to manual management of music every time. ***? (END BUG RANT)
b) So I decided to try the automatic synchronising method, but when it is in automatically sync, I can't browse my music on my powerbook's itunes, and it keeps asking me to synchronise with the itunes library on the powerbook, which is blank!
Can't there either be a 3rd party app which is like itunes in the sense you can browse/listen to the music on the ipod, or a simple method of management/maintenance when plugging in ipods to other computers without it synchronising with their libraries (for listening purposes only of course)
So.. folks... Apple tech support gurus... WHAT ARE MY OPTIONS!??!?!?!?? :\

You are on the right track!
+--the entire iTunes folder found in My Music+
This contains the itunes library database files (iTunes Library.itl which has metadata on ratings, play counts) and all the itunes library content files (Artist/Album, movies, etc.)
The lyrics are inside each songs' file.
The Artwork should also be in this folder.
+-User Name\Application Data\Apple Computer+
+-User Name\Local Settings\Apple Computer+
These include the backups you need for the ipod and apps data.
You don't need to deauthorize if you are simply reinstalling itunes. You only need to deauthorize if you are reinstalling Windows itself.
+--Can I copy the iTunes folder from the external HDD and paste it back into the same location after I recover my laptop+
Yes
+if the version of iTunes is slightly different (I have 10.1.0.54)?+
If the new version is at least 10.1.0.54
It won't work to go backwards to an older version such as v9.0

Enable data paging with parameters count() on new php function issue (BUG?)

I've got my app prototyped quickly with the default settings in Flex Builder 4. Now I'm going back and adding/modifying features to polish the app off.
For this application I'm using PHP5 as the server side.
The data paging is really cool and simple to call using the default settings. However, I'm running into issues with customizing the data paging feature.
This is the default header of the php function that was created for me:
public function getTblbrowserrecord_paged($startIndex, $numItems){...}
Instead of dumping all data back to the function I want to be able to search on certain fields so I created a new function called:
getTblbrowserrecord_search_paged ($szName, $szIP, $szRule, $szURL, $szDateLow, $szDateHigh, $szCode, $startIndex, $numItems ) {...}
The new function is tested and operates as designed.
I set the input types of the variables and return type (Tblbrowserrecord[]) of the new function then went to enable data paging. The first screen came up and asked me for the key to use which I selected. The next screen came up and asked me for the number of records which I set to 100 then went to select the count operation.
I initially selected the automatically created count() function but it came up with the error " Count operation parameters should match the paged operation parameters list."
So I created another function to match the search function's parameter's list:
public function count_searched($szName, $szIP, $szRule, $szURL, $szDateLow, $szDateHigh, $szCode, $startIndex, $numItems) {...}
But I still ge the error "Count operation parameters should match the paged operation parameters list."
But they DO match. I looked at the default functions that were created by FB4 and noticed that the automatically generated function count() has no parameters and the paged function has the two functions $startIndex and $numItems which are not identical yet they work. I tried removing those two fields from the count function but got the same results.
What am I doing wrong?
Thanks!

Nevermind... For some reason my FB4 is not updating correctly. After removing the two control fields at the end of the list AND exiting the app/re-entering everything worked ok. I've been having this issue a lot lately and am thinking that is is a bug of some sort?

IPod function / standby bug?

Similar Messages

Maybe you are looking for