Ipod generation 1 apps opening and closing instantly with software version

I have a Ipod Touch generation 1 and have just downloaded version 3.1.3 upgrading from 1.1.5. I am now having a problem with all the apps that I have downloaded from the App store through the IPOD. The apps are opening and closing instantly.
Any comments?
Thank you for any advise and or help!

By a reset, I believe he is referring to holding down the Home button and the Sleep button both at the same time until the apple logo appears on the screen. Ignore the "slide to power off" option that might come up. This process generally takes about 5-15 seconds to see the logo, then about another minute or so after that for the reset to complete.
Now, as for the issue you are seeing, if the reset doesn't resolve it, it might be the same thing I have seen on other iPods. Almost all (if not all) I have seen with this problem have been when the owner unplugged the iPod from their computer before the sync process had fully completed. This seems to leave the iPod app directory structure in some "confused state". Every time I have seen this happen, I have been able to resolve the issue by deleting an app from the device, then re-downloading it using the App Store app on the iPod (while connected to a wifi network). To play it safe, I generally use a free app.
Don't ask me why, but the downloading of an app directly from the device itself seems to reset the iPod app structure and the other apps generally resume wirking properly...

Similar Messages

My ipad2 has gone haywire with apps opening and closing pictures flashing on safari history messages, key board etc. I have tried rebooting it to no avail.

My Ipad 2 is possessed. I was reading a book when the pages started flipping on hteir own, with apps opening and closing. I did a cold boot, but it was no help. No, it has not gotten wet.

Sounds like a hardware problem. Contact Apple Support.

I have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

i have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

The two most likely culprits would be a faulty cable/charging block or a bad digitizer. Try charging the device with a different charger and cable. If the problem goes away, then the problem is with your charger. If it does not, try the basics of resetting, restoriing from back up, restoring as new. If you still have the problem, make an appointment at the Genius Bar at your local Apple Store for evaluation.

Inventory opening and closing stock with value report

Hi All,
Is it possible to get details of both opening and closing stock with value of each items of last financial year (2009-10) in inventory report?
Mizan

Hi..
you can try this query
Declare @FromDate Datetime
Declare @ToDate Datetime
set @FromDate =
    (Select min(S0.Docdate) from OINM S0 where S0.Docdate >='[%0]')
set @ToDate =
    (Select max(S1.Docdate) from OINM S1 where S1.Docdate <='[%1]')
select * from
    SELECT T0.itemcode,
    min(T0.Dscription) as 'Item Description',
    min(B1.ItmsGrpNam) as 'Item Group', W1.Whscode, C1.Location,
    (isnull((
        Select sum(isnull(inqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode
        and O1.Warehouse=W1.Whscode
        and O1.docdate<@FromDate ),0)-
    isnull((
        Select sum(isnull(outqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode
        and O1.Warehouse=W1.Whscode
        and O1.docdate<@FromDate),0)
    ) as [Opening Stock],
    isnull((
        Select sum(isnull(inqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode
        and O1.Warehouse=W1.Whscode
        and O1.docdate>=@FromDate
        and O1.docdate<=@ToDate and O1.inqty>0
        and O1.transtype in (20,18)),0
    ) as [Purchase Quantity],
    isnull((
        Select sum(isnull(outqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
        and O1.docdate>=@FromDate and O1.docdate<=@ToDate
        and O1.outqty>0 and O1.transtype in (21,19)),0
    ) as [Purchase Return Quantity],
   isnull((
        Select sum(isnull(outqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
        and O1.docdate>=@FromDate and O1.docdate<=@ToDate and O1.outqty>0
        and O1.transtype in (13,15)),0
    ) as [sale Quatity],
    (isnull
        Select sum(isnull(inqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
        and O1.docdate<=@ToDate),0
        isnull((
            Select sum(isnull(outqty,0))
            from OINM O1
            where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
            and O1.docdate<=@ToDate),0)
    ) as [Closing Stock]
    FROM OINM T0
    INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode
    INNER JOIN OITW T2 ON T1.ItemCode = T2.ItemCode
    INNER JOIN OITB B1 ON T1.ItmsGrpCod=B1.ItmsGrpCod
    INNER JOIN OWHS W1 ON T2.WhsCode = W1.WhsCode
    INNER JOIN OLCT C1 ON W1.Location=C1.Code
    Group by T1.itemcode, T0.Itemcode, W1.WhsCode, C1.Location
) a
where (a.[Opening Stock]
        +a.[Purchase Quantity]
        + a.[Purchase Return Quantity]
        +a.[sale Quatity]+a.[Closing Stock]
       ) !=0
Regards,
Bhavank

PDF files opening and closing slowly in Acrobat version 9.5.2.

I am running Acrobat 9.5.2. Last week our server died at work and we converted to a new one. Since then pdf files have been opening and closing very slowly, sometimes taking 15+ seconds to close. Strangely enough, if you open and close several in a row then they usually open and close quickly with some exceptions, but if you wait 10+ seconds and then try to open or close one it takes forever. This happens whether or not the machine is connected to the server.
I tried to do a repair, however it said that it could not connect to the my documents folder at the old server location. When I originally installed Acrobat, it was done through my University and not while I was even connected to my work server, so that is confusing to me. Please help, as I use pdf's constantly and this is really slowing me down.

It doesn't seem like an Acrobat problem per se but a problem with they way your computer is configured to reach the new server. Perhaps you need to have someone come and look at how your computer is configured to reach the new server. It could also be a problem with how the university configured their server. Server issues are something that cannot easily to diagnosed remotely.

Opening and closing stock with sales order and with out sales order

hello,
any body please help me my client want to check opening stock and and closing stock in areport.
material contains batch and some material with sales order and some are with out sales order. my client is asking this in a single layout. please tell me isthere any teport or bapi or function module to get this report.
this is very uregent. and layout is requesting like opening stock, production stock, sales stock and closing stock.
please guide me to get this report.
Thanks & Regads
Bhakta

Transaction MB5B
For sales order related use specila stock as E and use radio button indicator in stock type
For stock w/o sales order, use special stock indiactor as "space' and stock type valuated stock.
to get a perticular month,opening stock/closing stock enter the start date/end date as month start and end date.
See the o/p which will give the stock as required by you

I made the upgrade for ios 6 and now my ipod 4G touch open and close instantly for one hour still now

Hello
when i made the upgrade for my iPod touch 4g 32 Go
ios 6
now i cannont do anything it is close

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Opening and closing stock report

Hi,
i have to develop a report in abap of stock (Opening and closing stock) with each material, plant, business area & monthly date wise. I got some fields from mseg like material number, plant, business area but i didnt get fileds like opening stock, purchase, consumption & closing stock
in report fileds should be like
material number
plant
business area
posting date
opening stock
purchase
consumption
closing stock
kinldy help <removed by moderator>
Moderator message: Welcome to SCN!
Moderator message: please search for available information, ask a functional consultant near you.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 21, 2011 3:35 PM

Yes umesh from external 99% of your stock from mvt 101, 501 is very rare case & 561 is not from external source it is initial stock updation which will be done only once when you are going live & later 561 mvt will be normally blocked for use.
You can also sort in MB5B more than one movement type click on multiple selection (that is on yellow arrow icon) & in single value tab enter mvt 101 below that 501.
This will give you report for mvt types 101 & 501 in this way you can also sort reports for more than one mvt type.
Regards
Rang
Message was edited by:
Ranganath Mysore

Opening and closing stock from mb5b

Hi Experts
I am writing a code which will display goods reciept, issue, transfer, etc according to movement type .
I have done the coding but the problem is I am not getting the opening stock by period , I want to get sum (lbkum) sum (salk3) into some formulae column .. I want to get the sum of lbkum from mbewh joining mseg,mkpf as period -1
ie if I select 04.03.2009 , I want the sum of stock from mbewh based on period -1 . so what formale I have to write
to get the opening stock on the date selected . The date range is selected from mkpf .
I want to get stock on whatever date selected from mkpf.
SELECT SINGLE * FROM mardh
WHERE matnr = p_matnr
AND werks = p_werks
AND lfmon = p_buper
AND lfgja = p_gjahr.
Regards
Piroz

you can get all data using MC.9 report
here you can get opening and closing stock with values based on material, plant, storage location
Kindly make sure while giving period
here it will take period in month and year i.e if you want opening stock for April then you have to give it as 03.2008 to 03.2008 and closing as 04.2008 to 04.2008
Regards
Edited by: WISH on Apr 23, 2008 1:15 PM

TS3274 My first generation ipad keeps opening and closing my apps what should I do?

My first generation ipad keeps opening and closing my apps what should I do?

try updating to ios 5.1.1
if the problem continues perform a back up and then restore
Go to settings>icloud>storage and back up>back up
or back it up to a computer
after that preform a restore by going to
general>reset>erase all content and settings
this will delete everything except the enabled stuff on icloud.
You can view whats enabled by going to icloud in settings.

My ipad mini is going mad opening and closing apps zooming in and out typing and deleting and i can't do anying with it ..help

my ipad mini is going mad opening and closing aps zooming in and out typing and deleting ...ive tried rebooting to no avail..please help

Probably a Hardware problem - visit an Apple Store or contact Apple support.

COPA reporting with open and closed projects

Dear All,
I am designing a COPA solution for an infrastructure providing company using project systems and posting to/settling out of projects on a monthly basis. Projects run for long periods and continually incurr costs and earn revenue untill they are closed. The requirement is to report by common characteristics (say customer group) and separately for open and closed projects. My issue is how to separate the line items of projects where status changed to closed (having posted with the status REL previously), from the open ones, without entering the projects individually in the selections screen.
Any ideas will be greatly appreciated.
Thanks,
Maddy

Dear Satya,
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee0bbd55c811d189900000e8322d00/content.htm
An item of a purchase requisition is only regarded as Closed if the requested order quantity has been included in a purchase order.
You can also set an item to Closed manually. <b>This item will then not be taken into account by the materials planning and control system.</b>
You can set the Closed indicator manually at the following points (it can later be cancelled if necessary):
When changing a purchase requisition, on the item detail screen
When creating a purchase order referencing a requisition, on the item detail screen of the PO
You can still create purchase orders by referencing a requisition if this indicator has been set in the requisition concerned.
The indicator can also be set in the case of automatic PO generation from purchase requisitions. On the initial screen of the requisition, you can specify that the requisition is to count as closed as soon as an associated purchase order has been generated, even if the complete quantity requested has not been ordered, for example (Set reqs. to "closed" indicator).
Analyses of Purchase Requisitions:
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm (visit section under Reporting in Purchasing)
Hope this will help.
Regards,
Naveen.

Since upgrading my iphone 4 to IOS6, apps keep opening and closing on their own

Since upgrading my iphone 4 to IOS6, apps keep opening and closing on their own and the wrong ones open when another is pressed. I've tried a full reset but still the same thing...HELP PLEASE :-(

I'm not familiar with the Belkin cover, but you could try removing the cover and reboot the iPad and see how that goes.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

HT4623 Why is my iPad 2 randomly opening and closing apps? And why, at the same time, does the screen goes bigger than smaller repetitively?

7.29.2013 - iPad2 begins to randomly open and close apps and also the screen changes from bigger to smaller repetitively when the apps are randomly opening and closing. Nothing occurred with the device to indicate why this started happening; it was not dropped, etc.

If still problem:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Customer/Vendor A/C with line item details and with opening and closing Bal

Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balances

Hello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah

Ipod generation 1 apps opening and closing instantly with software version

Similar Messages

Maybe you are looking for