Ipod generation 1, updated ipod software version 5.1.1 and now my ipod is dead..

I have an ipod generation 1 since 2005 and it works perfectly till yesterday when i receive a prompt from iTunes store (after my last login 6 months ago) reminder/alert to update my ipod software version to 5.1.1 in which i did and just after i updated the software my ipod went dead..
The message appeared "Please Wait..Very low battery.." However, when i plug it into adapter charger i'll see the normal screen, but the message appear when i use the cable to connect to my lappie....Urgent help! Thanks.

You need to continue with the Recovery...
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... After the successful Recovery... Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766

Similar Messages

  • My computer restarted while I was updating my software from OS4 to OS5 and  now my ipod is froze in a way that it shows the symbol that I should connect it to itunes. I connected it but itune is not recognising it. I have tried to reset but it nothing.

    My computer restarted while I was updating software from OS4.1 to OS 5. Now my Ipod touch is just frozen. All it shows is the usb connection to itune symbol. Itune does not recognise. I have done the reset but nothing happens after the apple symbol shows up and back to usb and itune symbol. Help please.

    See if placing the Ipod in recovery mode will allow iTunes to see the iPod so yu can restore the iPOd.. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    Next try DFU Mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPod freezes after updating to software version 1.2!!!

    iPod freezes after updating to software version 1.2!!! After installing version 1.2 the "do not disconnect" screen took forever to disappear, so i just removed the cables and it still remained
    like that, i restarted it manually, but now it's getting stuck when the apple logo appears...i reset it and when i finnally turns on, and i'm at the language tab, it freezes. can anyone help.!?

    Apple just released firmware 1.2.1 for the ipod, you should try restoring your iPod again with that.

  • I recently updated iTunes to version 11.5.5, and now my iPhone 5 will not sync up completely with iTunes.

    I recently updated iTunes to version 11.5.5, and now my iPhone 5 will not sync up completely with iTunes. ITunes will recognize and sync up, but I now cannot manage my music on my phone. Also, all of my playlists on my iPhone were wiped out.  It would be great to retrieve my phone playlists, but more important, be able to manage my music again.  I'm running on Windows 7 and I own iPhone 5.  Suggestions?

    I have windows 8, I'm not sure if that has anything to do with anything, but i figured maybe 11.1.4 just doesn't like 8. soooo.. i went onto my computer settings and uninstalled anything and everything made my apple and then reinstalled itunes 11.1.3 and it now reads my ipod nano happy day thanks apple for making something that you can't help me with at all

  • I have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

    i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

    i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

  • I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

    I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

    I used disk permission repair to try to resolve this as well as a 'soft' restart. Still have a grayed-out mute checkbox in the sound section of system preferences.

  • HT201210 Just updates itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

    Just updated itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Recently updated Numbers to Version 3.5.2 and now also seem to have Numbers Version 2.0 on my launchpad? Can anyone explain how this has happened - how do I get rid of it?

    Recently updated Numbers to Version 3.5.2 and now also seem to have Numbers Version 2.0 on my launchpad? Can anyone explain how this has happened - how do I get rid of it? Not able to move to Trash.

    What is strange however is that my iMac is only a few months old and they all were upgraded to V3.x just a few months ago - with all Apps for iWork removed at that time.
    Unless you did something specific to remove the old versions of the iWork apps (not advisable) then, as Wayne points out, they were not actually removed from your Mac, just moved into that subfolder within your main Applications folder.
    I originally downloaded Numbers 2.x from the App Store (i.e. didn't install from a disk). I still have it on my Mac.  But only Numbers 3.x appears in Launchpad.
    I don't know whether this will help, but in Mac App Store you might try clicking 'Account' under 'Quick Links' on the right, signing in with your password, and clicking the 'Reset' button to the right of 'Reset all warnings for buying and downloading'.  Sometimes the App Store gets a little confused. It's possible Launchpad may be taking its cue from the App Store in showing that old version of Numbers.
    By Launchpad I assume you really mean Launchpad, not the Dock.  I usually use the Dock. If that's what you're using too, then of course you can just drag the icon for the old Numbers off the Dock and it will vanish. (But the Numbers 2.3 application will still be there in that subfolder when you need it.)
    SG

  • I updated the software on my iPad mini and now the FaceTime app is missing. How do I restore it?, I updated the software on my iPad mini and now the FaceTime app is missing. How do I restore it?

    I updated the software on my iPad mini and now the FaceTime app is missing. How do I restore it?, I updated the software on my iPad mini and now the FaceTime app is missing. How do I restore it?

    Check settings an make sure FaceTime is turned on and addresses are configured  (Settings app > FaceTime)
    Check all of your home screens and folders. It could have been inadvertantly moved (you can also use Spotlight search to check fior it: Swipe down form the home screen. This will also let you know it it is in a folder)

  • I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?

    I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?

    I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?

  • I just updated Safari with version 5.1.10 and now I cannot use "open location".  Anyone else having this problem and are there any solutions?

    I just updated Safari with version 5.1.10 and now I cannot use "open location".  Anyone else having this problem and are there any solutions?

    Ok ...
    Try troubleshooting extensions and third party plugins.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow all other plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

  • I was updating my iPod touch to 4.2.5 when an error occurred and now my iPod is not recognized by my computer or under devices in iTunes.  My iPod is also stuck on a screen saying to connect to iTunes.  I tried resetting my iPod and it did not work.

    Please help!  I was updating my iPod to 4.2.5 and iTunes said that it was preparing my iPod for update.  Then an error popped up and now my computer won't recognize my iPod and it doesn't show up under devices in iTunes.  All it has on my iPod is a picture of a USB cable with an arrow pointing to the iTunes logo.  I tried resetting my iPod and it just restarts to the same picture.  I tried restarting my computer as well.

    What was the error number?  That would be very useful since the following gives actions for various errors.
    http://support.apple.com/kb/TS3694
    Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes.  See:
    http://support.apple.com/kb/HT1808

  • I installed a rcomended update of idt high definition audio codec and now my audio is dead

    i installed a rcomended update of idt high definition audio codec and now my audio is dead

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • No sound through headphones on new iPod Nano 7th. Latest software version has been downloaded and music has been synced from library.

    No sound coming through headphones on new iPod nano 7th.  Music has been synced from library, and latest software downloaded.

    hi there,
    it sounds like you have just defective speakers ( or connector issue ). better to contact support for replacement.

  • I tried updating to the new iOS 6.1, and now my iPod is stuck in Recovery mode.

    I've tried DFU mode and Recovery mode, but neither seem to work. It won't update. When I connect the iPod to my computer, it says it has detected an iPod in Recovery mode, and it must be restored before it can be used with iTunes. When I click on the "Restore iPod" button, it downloads the new firmware, and makes me repeat the process. I've already called Apple Support, but they couldn't help, either.
    Help me, please.

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Free goods in STO & Inter company PO

    Hi Friends I have one scenario where I get article as free with other Articles, the same free article may get from with out free from some other vendor also. but this free article should be distributed to store with STO and Inter company PO. problem

  • 9.2.0.8 Client patch

    Hi, I'm looking for 9.2.0.8 Client patch for Windows 7. I do not see it here : http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html Where can I find it ? Thank you.

  • Increase in speed after defragmenting Windows

    Hi there everyone. This is an observation I made after I defragmented Windows on my MacBook. The Windows ran faster (obviously) and surprisingly, Mac OS also became faster.

  • I keep getting an error message saying "Keychain cannot login to store" what do I do to fix this?

    I'm having Keychain problems.  When I go into my iCloud it asks me to enter my password, when I do that an error message comes up saying that the "Keychain cannot login to the store." I haven't been able to find a way to fix this keychain problem and

  • UCCX voicemail redirect

    Good evening everyone, I'm hoping someone can give me some assistance with this question about uccx scripting as I am new to scripting and can't follow the logic. I see in the script that there is a menu option then voicemail then a Dequeue, which I