IPod gets disconnected and the reconnected

Hello everyone,
I have an iPod Shuffle 1Gb.
It has worked fine for about six months.
I upgraded iTunes to version 5.0.1.4, and it also worked fine... until recently, when it insisted on me having to upgrade my iPod Shuffle to version 1.1.2. If I clicked Cancel, iTunes closed!
Ok, so I upgraded my iPod, and then the trouble started: Everytime I try to transfer songs from my library to the iPod, the iPod quickly disconnects and then reconnects, but the transfer is cut!
Sometimes I am lucky if I can transfer one small song before it happens, but this is not the way it is supposed to work, I'm sure.
I have tried to downgrade the iPod back to version 1.1. But... as soon as I opened iTunes it told me that I needed to upgrade my iPod, and, again, iTunes closed if I refused to upgrade.
To the Apple-developers:
1) Please fix these problems as soon as possible!
2) Please leave the users with a choice to use older versions of the firmware. As you should know by now, the newest versions are not always the best!
Best regards
Claus Holm, Copenhagen, Denmark

Yes, I have tried that.
And now I have just done it again, hoping it would help...
But I should never have done it!
The problem persists, and now, again, I have to go through transferring all my songs to my iPod one or two at a time.
Any other suggestions, please?
Regards
Claus, Copenhagen

Similar Messages

  • I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

    I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • My iSight get disconnected and create a distortion on the image. i don't know what could be!

    my iSight get disconnected and create a distortion on the image. i don't know what could be!

    Restart Mac and then test more than one iSight app in more than one user account. If the problem remains, try the suggestions from http://support.apple.com/kb/HT2090

  • HT1320 If an ipod is disconnected from the USB cord without being ejected first how do you fix this matter?  It's making a weird sound and displaying the Apple support email address only.

    What to you do it your ipod is disconnected from the USB cord without being ejected first?

    3) If this is a counterfeit, is there someone in Apple that I should contact to help them track this kind of problem?
    Apple Legal contacts
    "*Counterfeit Prevention (Hardware)*
    To report suspected counterfeit or imitation Apple products, contact [email protected]"

  • When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

    When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

    Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.

  • Users getting disconnected when the sap cluster group failover happens.

    Hello all,
    We have done the HA installation on mysaperp2005(ecc6.0).
    The failover groups are sapcluster group(ascs+scs instance) and the Database(DB group).The central and the dialog instances are installed locally and do not form the part of the cluster.
    When ever the sapcluster group failover to the second node.The users gets disconnected and need to login again.
    How can we configure the nodes so that the users do not get disconnected during the failover of the sap groups and the users are not disturbed.
    thanks
    satyajit

    Hi Satyajit,
    This is exactly the reason why it is called High Availability and not Full Availability.
    When the node where Database runs fails, the memory structure (Instance) associated with the Database is lost and needs to be restarted on the other node. This means that all the transactions which have not been commited to the database needs to be rolled back. Hence the users doing insert/updates into the database will be disconnected from the System.
    While the database is unavailable the Work processes go into a restart mode wherein they wait for the DB to come up again and keep pining it.
    Database becomes available again after the Instance is started on the other node with Instance recovery and the users can connect back. Work processes recognize that the database is available and everything is back to normal.
    In case of Central Instance (enqueue) failover, the lock information is lost and hence again the transactions need to be rolled back hence the users will be disconnected if they are doing an Insert/Update into the System. System becomes available once the Enqueue service is made available again after the failover.
    So in either case there will be user disconnects as HA doesnot cover the memory structure failovers.
    Hope this clears it up for you.
    Thanks and Best Regards,
    Sunil.

  • HT1766 my ipod is disabled, and the recovery mode is not working. what should i do?

    my ipod is disabled, and the recovery mode isn't working. what should I do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. Try more than once. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    Try another cable
    Try on another computer

  • TS1363 im trying to restore my iphone and it got disconnected and wont reconnect to restore again, what do i do

    im trying to restore my iphone and it got disconnected and wont reconnect to restore again, what do i do

    Hi Troy,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting steps in our iPhone assistant helpful if your device isn't recognized by iTunes:
    http://www.apple.com/support/iphone/assistant/itunes/
    Best Regards,
    Jeremy

  • My incoming calls on my iphone 5C get disconnected after the first ring. Please help!

    My incoming calls on my iphone 5C get disconnected after the first ring. Please help!

    I had this problem too with my newly bought iPhone 4s.I went to a technician shop to ask what the problem is and they said they could fix it however they would charge £35 and I believed this was too much. I was playing around with my iPhone to see if I could fix this problem I went on setting the clicked on the music section at the music section there is the button called sound check which was off so I decided to turn it on . After I turned it on my sound came back I was ecstatic I saved myself £35 and having to return the phone.

  • To whom it may concern      Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E  2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in goo

    To whom it may concern
    Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
    2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
    I look forward to your reply and a resolution of this problem.
    Thank you very much!!!

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • My computer no longer recognizes my iPod Touch. And the iPod Touch does not recognize that it is connected to a computer.

    My computer no longer recognizes my iPod Touch. And the iPod Touch does not recognize that it is connected to a computer.  It has worked great for many days until today.
    I’ve tried two different Apple cables.
    I’ve tried different USB ports on the computer.
    I have rebooted both the Mac and the iPod.
    I’ve wiggled the cables and checked for dust in the connectors.
    The iPod charges using this same cable connected to wall wart.  That’s a good sign.
    Both the Mac and iPod seem to work fine separate from each other.  They just won’t talk anymore.
    Mac mini
    1.83 GHz Intel Core Duo
    OS 10.4.11
    iTunes 9.2.1
    iPod Touch 32GB, version 3.1.3 (7E18), model PB533LL 

    I found this possible solution on another support thread, so I tried it.
    turn off iPod
    hold Sleep and Home buttons to start it.
    When Apple appears, let go of Sleep button, but keep holding Home button.
    When screen goes blank, let go of Home button.
    Connect cable and check iTunes to see if it has conencted.
    This did not work for me.
    I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
    I connected them with the cable, and it works like normal.  :-)

  • My ipod is disabled and the slide to unlock screen isnt coming up. how do i fix it

    my ipod is diabled and the slide to unlock bar isnt coming up on the screen. when i plug it into itunes it tells me to enter my password on the phone before it can be used with itunes which i obviously cant due to the slide to unlock bar not being there. help me...

    Place the iPod in recovery mode and then restore the iPod via iTunes.  For recovery mode see:
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • What should i do if my ipod turned off and the batterie isn't dead  and my computer wont respond when i plug my ipod in

    what should i do if my ipod turned off and the batterie isn't dead  and my computer wont respond when i plug my ipod in

    hey there...i have the same issue i turned off my ipod and not i cannot start the unit again. I bought this in Dec and know for sure my batterie is good....please help......

  • I-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).

    Hi
    My i-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).
    I have updated the latest OS 6.0 in my i-pod touch.
    Kindly send the solution
    Regards
    Deepak
    <Email Edited By Host>

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    Also, you are not addressing Apple here. We are all just users like yourself.

  • HT1212 My ipod is disabled and the message requests to try again in 223004 minutes.  I think it might have something to do with the date being set wrong before it went into disabled mode.  Can you assist in enabling.

    My ipod is disabled and the message requests to try again in 223004 minutes.  I think it might have something to do with the date being set wrong before it went into disabled mode.  Can you assist in enabling.

    You'll need to connect it to the iTunes library you normally sync it with and restore it.  If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

Maybe you are looking for

  • ITunes won't stay authorized...

    Not sure when this started but everytime now I open iTunes and try to play a song, watch a movie or listen to an audiobook, I get the "This computer is not authorized" message. I put in my username and password and then I get "You have authorized 3 o

  • No Video Podcast.

    Hey i have a problem with my Apple TV that some of the video podcast are not working. The ones not working is Top 5 from CNET and some more. But the weird thing is some are working like Geek Brief TV and NYTimes. can i get some suggestions. Thank you

  • Oracle 9i Release 2 - Installation hangs please help

    OS: SUSE 10 I have to Install oracle 9i Release 2(9.2.0.4.0) I have java-1_4_2-sun installed, and the installation directory/path is /usr/lib/jvm. now my question is should I change the path of JRE_LOCATION, in the oraparam.ini from JRE_LOCATION=../.

  • SharePoint Designer 2013

    Dear Professionals I am using SPD 2013, and I want to make my forms to look more intelligent. Specifically, I want to do the following: 1- I want to add variable number of fields, e.g. if the form is an Item Request, I want the user to enter an item,

  • How do I permanently delete unwanted emails received on my iPad?

    How do I permanently delete unwanted emails from my iPad?