Ipod goes into recovery mode every time I plug it in

Just bought a new iPod classic, 160gb. I plugged it in for the first time to sync it with my laptop and get some music on it. The next time I plugged it in, iTunes gave me an error message saying it couldn't read the contents of my iPod, and that it detected an iPod in recovery mode. I had to restore it just to put 5 new songs on it, which took almost 45 minutes. Since then, I've updated the iTunes and iPod software but this is still happening every time I plug it in to my computer.
Are other people having this problem? Is it hardware or software?

Pretty much anyone using an iPod Classic with iTunes 9 or 901 is screwed in a similar manner. Read around these threads and you'll see man. Sorry, no word from Apple yet on what's going on.
Looks like their ''upgrade" to version 9 may actually be damaging hardware, as hard as that seems to believe.

Similar Messages

  • IPad goes into recovery mode every time I power up

    Is this normal?  What could be wrong?

    It is by no means normal. When you say that it goes into recovery mode, do you mean that you have to restore the iPad every time that you turn it on?

  • IPhone goes into recovery mode every time it dies?

    If my phone battery dies it immediately is in recovery mode and I have to wipe the phone to get it back to factory settings. Can i fix this??? It is very annoying and sometimes my phones dies when I have 30-40% battery still so I am not sure if I can even prevent this from happening.

    Hello emmahardman,
    It sounds like your phone needs to be restored because it goes into Recovery Mode when the battery runs out, and it sometimes turns off when there appears to be plenty of charge left. Assuming you are restoring from a backup when this happens, I would next time set it up as a new device and test to see if it happens again. If so, reset the phone with the following process and test it again:
    Turn your iOS device off and on (restart) and reset
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    If the issue still keeps happening, I would next seek service for the iPhone:
    iPhone Repair and Service - Apple Support
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT201210 Iphone 4 goes into recovery mode every time the battery runs out?

    Iphone keeps returning to recovery mode when the battery runs out and is charged up again. I have updated the software and it still requires a system restore everytime the battery dies, does anyone have an information to help resolve this issue?

    That's what I did. When selected restore, it downloaded and verified the installer, and then threw the error that the phone is in recovery mode instead of proceeding with the restore. I then tell it a second time to restore and it proceeds to restore; but I never get the message that the 4 has successfully unlocked.

  • IPod goes into recovery mode when plugged in, and forces me to restore

    Basically what is written above ^^ is what is happening to my iPod Classic 80GB. It hasn't done this until recently, and every few days or so when I go to sync new songs onto my iPod, it goes into recovery mode and says that the iPod must be restored. Now, normally this wouldn't be a problem, but when you have an 11,000 song library that takes around 4 hours or more to sync, it gets really under your skin.
    I'm running Windows Vista, any help?

    I just purchased a Classic iPod, and two days later it is stuck in this restore loop. The iPod worked fine until the restore was complete. When unplugged from the computer, it responds fine, but now cannot sync at all to put media on the device.
    Current machine is WinXP SP2 (work machine). It is also happening on Win7 desktop, 13inch Macbook (OS 10.6.3), and Mac Mini (OS 10.6.3)(personal machines).
    Does this appear to be a faulty device?

  • IPhone 4S goes into recovery mode every night.

    Used iTunes to restore once, and drove 2 hours to the Apple Store today to have them do a DFU restore. Still didn't fix it. Not sure what the problem could be. I can typically hold the home and power button to bring it out, but sometimes that does not work. Bought the phone new in December. AT&T is the carrier.

    Your Device is still under warranty... did the Store not offer to replace it...
    If you are dissatisfied... contact Apple and explain your issue...
    Apple Contact USA   http://www.apple.com/contact/
    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57

  • Ipod Touch Keeps Going Into Recovery Mode

    Hi, I've had an Ipod touch for about 6 months now and haven't really had any problems with it to date. Recently (around the time I installed the 1.1.3 firmware), it seems to be randomly going into recovery mode.
    When I plug it into my imac, Itunes says it detected an ipod in recovery mode, and I have to restore it. During the restore process the screen lights up with apple logo and spinning wheel, it says successful restore. But the ipod doesn't restart... just goes straight back into recovery mode. It usually takes about 2 or 3 restore attempts before it works properly. I resync and everything goes back to normal for a few uses. Then I go to turn it on and nothing... itunes just tells me to restore again.
    Anyone else seen this issue before? I'm pretty sure the batteries aren't flat (since when it finally does restore, they usually start around half full... and I've tried leaving it on the charger for a few hours to no avail). And I only turn wifi on when I need it (usually turned off). I've tried pretty much everything I can find in the help files (hold button, hold+power, hold while connecting to itunes, nothing seems to wake it up... just black screen until a successful restore happens)...
    Thanks in advance...

    I had the same problem with my Touch but it started the first day. It was also doing weird things like telling me the battery was full then half an hour later warn me there was only 10% left. It got better for a while but long syncs with iTunes usually threw it into restore mode again.
    I finally brought it to the Apple store nearby and they were able to recreate the problem when they tried a sync on their machine. They told me it was a hardware issue and did an exchange right there. I have heard bringing it to an Apple Store will increase your chances of an exchange. Sending it in may or may not get you a new one. Good luck.
    Message was edited by: sdutcher

  • IPod touch 1st gen goes into recovery mode after shut down or lock

    Alright, so I bought a used iPod touch 1st gen from a friend. It was working fine for a few weeks until it started shutting off and going into recovery mode when I locked or turned it off. When off, half of the times I can do a hard reatart and hold the home and hold buttonsand it will turn on. The other times it will just come up with a white screen. When I plug it into my computer, it says it has to be restored. And this is an ongoing loop that I cannot seem to fix. I looked up my serial number and it says it's out of warranty.
    So my first question is, is there anyway I personally can fix this problem, or do I have to take it to Apple? My second question is, what are their policies on iPods that were bought used from someone else? And is there a way for me to get a warranty on it to get it repaired if I can't fix it myself or do I have to pay full price on replacement or repairs?

    Welcome to Apple Discussions
    Did you let iTunes restore it? Has the problem continued? The article below discusses how to put your iPod into a recovery mode so you can fix it.
    http://support.apple.com/kb/HT1808
    As to your warranty, you no longer have one. Apple will, for a fee, repair your iPod if it needs repairing. There are independent shops who can do it as well - just Google them.

  • IPhone 3G goes into Recovery Mode after every restore

    Every time I restore my iPhone 3G, it goes into recovery mode right after an error-less restore has been completed. Yes, I've tried using tools such as TinyUmbrella and RecBoot and iRecovery. The device was not jailbroken when I tried to update it to 4.2.1 yesterday. They all reboot the phone and just throw it back into recovery. I have no idea what to do. Searching is futile. I thought I might as well do what I almost never do and ask these communities for support.
    I hope they don't disappoint.

    I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
    It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
    You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
    1) Download and install TinyUmbrella for your PC/Mac.
    2) Make sure iTunes isn't running and connect your device via USB.
    3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
    4) Profit.

  • Iphone 3g randomly goes into recovery mode all the time?

    I have an Iphone 3g version 4.3.5 (8L1). It works fine and i've never dropped it or anything like that. But the first time the problem happened i had just got done sending a text, pushed the lock button, and put it in my pocket. Then a few minutes later i pulled it out to check it and it wouldnt turn on. I held the lock button down and the connect to itunes icon came up, but nothing else. No emergency call option or anything. it wouldnt go away. i connected to itunes and it said it was in recovery mode. I tried to restore it but it came up with an error. i left it and tried again later. i restored but some things were erased. then it worked fine again. but later that night it did it again. so i just plugged it into the charger. in the morning i tried turning it back on again and it turned on without the connect to itunes icon. worked fine all day. but it does this every now and then. when i plug it in it goes back to normal after 10-20 mins. its annoying tho and if im not home my fone is stuck like that until i get back. why does it keep randomly going into recovery mode?

    1.  The latest iOS version available for the iPhone 3G is 4.2.1, not 4.3.5.  Do you actually have an iP3GS or was your iP3G hacked to install 4.3.5?
    http://support.apple.com/kb/HT3939
    2.  "I tried to restore it but it came up with an error."  What EXACT error?
    3.  "i restored but some things were erased"  What "things"?  Did you get an error again.  Were you restoring as new or using a backup?
    4.  Did you ever restore the phone as NEW without using a backup?

  • HT4061 My phone keeps going into recovery mode. I've had rest 5 times now. I was told I need a new phone. Any resolution??

    My phone keeps going into recovery mode. I've had rest 5 times now. I was told I need a new phone. Any resolution??

    Maybe you should consider that new phone recommendation you got...
    Who told you that?
    Is the phone jailbroken? Was it hacked to unlock it? Has it been physically damaged? Did you get it wet?
    You haven't provided anywhere near enough information.

  • My new nano keeps going into sleep mode every copy of minutes while music is playing.  I can't figure out how to stop this.  The user guide isn't too helpful.  Any ideas?

    My new nano keeps going into sleep mode every copy of minutes while music is playing.  I can't figure out how to stop this.  The user guide isn't too helpful.  Any ideas?

    This is usually a sign that your iPod's headphones are not plugged in all the way.  Make sure that you cannot see any of the silver still showing from the headphone's plug.  You should hear a sort of popping/clicking noise when inserting the headphones letting you know that they have been fully seated.
    B-rock

  • HT201210 i upgraded my iphone4 to ios 6.0.1 but my phone reset it self and its in recovery mode & every time i try to restore my phone its saying error 2001 or 2006 & my lock button is broken so i cant put my phone in dfu mode what im i suppose to do help

    i upgraded my iphone4 to ios 6.0.1 but my phone reset it self and its in recovery mode & every time i try to restore my phone its saying error 2001 or 2006 & my lock button is broken so i cant put my phone in dfu mode what im i suppose to do help me pleas

    Hi, to get your iPhone  4 back to normal, here're two ways for you.
    1.  Use Dr.Fone for iOS. The free trial version can fix iPhone screen of death. The free trial version can do that, you don't have to pay.
    Just download and install this software on your computer and connect your iPhone 4 to computer with a USB cable. When it detects your iPhone 4 is abnormal, click Restart the device to get your iPhone 4 to be normal.
    2. Use iTunes to fix it.
    Step 1. Make sure that the latest iTunes is installed on your computer.
    Step 2. Plug into a USB cable to connect your iPhone4 to computer.
    Step 3. Press and hold the Home button and the Sleep/Wake button at the same time for about 10s.
    Step 4. 10 seconds later, release the sleep/wake button. But continue to hold the home button until a message comes out, saying "iTunes has discovered an iPhone 4 in recovery mode, you must restore this iPhone before it can be used with iTunes".
    Step 5. Click your iPhone 4 in the left sidebar to show the device control panel on the right. Then, click Summary.
    Step 6. Go to Backups section and click Restore Backup.... In the drop-down list, choose a backup file and restore to your iPhone 4

  • IPhone 4 goes into recovery mode on its own?

    I have an iPhone four for Xmas and its working fine it just goes into recovery mode on rs own as luckily it can be restarted without connecting to iTunes, it's just really annoying having to do this every 2 minutes, anyone know what I can do?

    Basics from the user guide are restart, reset, restore from backup, restore as new device.  Have you gone through any, if not ALL these steps?

  • IOS 5 update forced ipod touch into recovery mode which I can't get it out of! Help please!

    Hi, I recently updated my ipod touch 3rd gen to ios5 (as prompted by itunes - assumed a standard software update). Immediately afterwards, my ipod went into recovery mode, and initially itunes recognised this and tried to restore it unsuccessfully. Not any more! Now it is either off, or displays the 'connect to itunes' logo when I connect it to the computer via USB lead.
    I've tried uninstalling and re-installing itunes but this hasn't helped it recognise the ipod.
    I don't think I've managed to go 3 months without having to do something like reinstall the drivers etc on this ipod, don't know why i expected this update to be any different!
    Can anyone help?
    Thanks in advance!

    Try disabling all security software and firewalls, then try again.
    Or try from a different computer.
    This error is a pain in the butt and a new issue, too. I'm sorry.

Maybe you are looking for

  • Bad RAM?

    Over the weekend I tried to compile Mozilla (on OS/2 if that matters) and got a few strange segmentation faults that I didn't have the last time I had tried. I then tried to check my RAM overnight, and indeed memtest86 v3.0 reported 39 errors total a

  • How to start Presenter Display?

    Hi all This is my first go at Keynote '09 and I love it. I want to use the Presenter Display function but I can't find it. I know how to go into "view" to customize Presenter Display options. But for the life of me I cannot figure out how to play Pre

  • Message no. IW056 Work center change -- default data redefined

    Hi, After EHP5 Upgrade. I am getting Message no. IW056 Work center change --> default data redefined during Maintenance Order Change (IW32). Please suggest me Is their any SAP Note or any Configuration setting to fix it. Regards Maheboob Please use [

  • Xcelsius connection for SAP NetWeaver BI

    Hi All, We are trying to create a xcelsius dashboard with combination of live office and SAP BI connection. We are using SAP authentication in infoview. My question is regarding SSO. As I understood that we cannot access this dashboard in Infoview an

  • Using the command line client...

    I've got a few thousand videos, with metadata, that I have to add to an existing FCS install. Right now, I'm just trying to figure out the proper way to use the command line. If I run the following command as root (paasset_predict_motorvideo is the n