IPod hangs when importing pictures using camera connector

Hi gurus !
I've got a camera connector to load my pictures from my
Nikon D-70 to my iPod video.
Once connected, the import started ...
There are 92 pictures and after picture 50, the iPod has
hanged and nothing else than reseting the iPod could I do.
I decided to start over again, and after reseting the iPod,
I did it again with the same result, now on picture 58.
Could anyone tell me about anything similar to this and how
to sort this out ?
Thx. Javi.
d620   Other OS  

Had kind of the same problem (sony a-100 camera, about 600mb on the memory card). But my ipod would go crazy: would no play music or videos, would not download again (said that there are 0 pictures in the camera).
Frustrating since I was on vacations, without a computer... In the end I just used a pc, and avoided using the camera connector... I'm trying to figure out *** happened (did hapen 9 times...

Similar Messages

  • LR 5.2 hangs when importing pictures from the SD reader (Macbook)

    Hi, I'm experiencing problems when importing pictures in Lightroom. The context is
    - Lightroom 5.2
    - Nikon D600 (always RAW files)
    - SDHC SanDisk Extreme Pro 32GB (UHS-I, 95MB/s)
    - Macbook pro 15" early 2011 (high def matte screen) running Mac OS 10.7
    I have a recurrent problem when importing pictures in Lightroom using the built-in SD reader. LR starts the process ok but a few seconds later it seems to stop. If I click on a picture I get "preview not available". Even when (after a long long time) the importing finishes, the pictures are corrupted and I have to start it again.
    The only solution I've found so far: try once and again (ejecting the card doesn't work, so I get several messages: 'disk not unmounted cleanly' or something similar) until it works smoothly. Usually 3 or 4 re-tries are needed. It goes worse with the number of pictures: the more pictures I have in my SD card, the more likely it will hang repeatedly. Very disappointing...
    Any help would be welcome. Thanks!
    Cheers, German

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. Be sure to not delete the photos after importing into the library.
    If you are able to import into the new library try repairing your current library as follows:  make a temporary, backup copy (select the library and type Command+D) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Incorrect file name when importing pictures from camera

    I am using PE 10 on Mac Snow Leopard.
    When I import pictures from my camera and select "Rename Files" with "Custom Date" + "Shot Date" (any format), the file name includes the custom name correctly, but the date part of the file name is some random date (with a weird year: 1913, 1969). Note the example shown on the Photo Downloader is usually the one used. The shot date in the meta data is usually correct. This appears to be similar to a problem when using the "Create Subfolder" option.
    Any ideas why or a work-around?
    I was using PE 8 and did not have this problem.

    Hi dannrendon2,
    Have you successfully run the PSE10_Hot.dmg file? You will not see any change in PSE10 or PhotoDownloader , it is just for fixing the issue of incorrect date format .
    Please follow all the steps mentioned in KB article link mentioned above. Finally when you installed the updater there would be a message of successful installation .
    If there is a failure in your updating process [In your case it is second attempt of updation, there may be a failure] , uninstall your application , check if there is any residual file in application folder under Elements Organizer or Photoshop Elements (delete them). Now again install PSE10 and try to update PSE10_HotFix.dmg updater. There should be a successfully completed message.
    Thanks,
    Nizam

  • My ipod is COMPLETELY SCREWED after using camera connector

    g'day
    After using the camera connector with my 30GB ipod, i can't do anything with it any more. when i select a song it doesn't play, it just skips through to the next and the next and the next... and i can't view any photos nor videos. ie my ipod is bloody useless!!!!
    no, there aren't any errors with any of the songs etc and i've done the so-called five r's but to no avail
    HELP ME!!

    My mini has been doing the same thing lately. I'll charge it completley, not touch it for a day, then when I go to the gym, it tells me that it's dead. It will always come on but I rarely get to the menu, it just tells me that it's dead. If you send it to Apple, it's something like $65 (there is a link here somewhere) but I'm contemplating just buying a new iPod. If I understand correctly, they don't fix your iPod if it's doing this, they just send you a new one...they don't make the mini anymore so am I going to get a Nano in it's place? I don't know, that's why I'm more than likely just going to buy a new one.

  • I-Pad won't import photos using Camera Connector. Screen goes black. What t

    I purchased a 16 gb I-Pad. I bought it on line from the Apple store. I also purchased a Case and a Camera Kit.
    I have been unable to use the Camera kit. Every time I try the connection is broken between the I-Pad and the Camera Connector. I thought that maybe I had a bad Camera Connector so I had my friend try it on her I-pad. No problem! Worked great. She was able to select and import all photos and when the import was complete it told her. We used her Camera Connector on my I-pad just to double check but just as before when the import process begins the screen goes black and if I'm lucky maybe 1 pic will import. We used my camera card on both I-pads so I feel confident that it is not the camera card. How can I get this fixed? Is there something I need to do? Has anyone else had this problem?

    Thanks for the suggestions. I have removed the I-pad from the case to eliminate the possibility that the Camera Connector wasn't making good contact. Didn't think about the sleep & home button. The connector I use when plugging into my computer works well. No problems, the I-Pad is visible in I-tunes and I can sync and make changes without issue. Just the Camera Connector is unable to import. The connector sees the photos and I can select them but when importing it goes black. Thanks again.

  • When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

    When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

    There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

  • I took a picture using camera plus app and the photo shows up in my camera roll; however, when I tap to view it a gray box shown instead. I tried to download the image and only the gray box shows. Can anyone help me?

    I took a picture using camera plus app. The photo shows up in my camera roll as a thumbnail; however, when I tap to view the photo it comes up as a gray box. I tried downloading, emailing, and copying the picture, but it always saves as a gray box. Can anyone help me?

    Hi Giorgiovdb!
    Unfortunately I cannot help you; all I did was test for you.
    I did an upgrade over my Lion install with Mountain Lion which went fine. I just tested icon view in my Finder on different files and folders and here in my installation all stays fine; good readable like in column view!
    The only thing you might try is change your Font in Finder and set it back to the original afterwards!
    I quickly Google'd how to change fonts in the Finder as appearantly there's no obvious gui item for it:
    http://usermanifest.wordpress.com/2012/07/06/osx-finder-title-bar-font/
    Try to see if it brings you anywhere!
    At my post all fonts act normal after my upgrade to Mountain Lion; I don't do a clean install unless I really have to!
    Goodluck!
    Gaytan

  • IPhoto 9.2 crashes when importing pictures

    We recently upgraded to iPhoto 9.2 and are now experiencing crashes when importing pictures from our camera, the desktop, and an SD card.  This was not an issue before this so-called upgrade.  Can anyone help us?  I am not a super-savvy computer user. 
    Help!!!

    The answer is in this link.  I tried it on two Mac computers with iPhoto 9.2 and it worked.
    http://www.letsgetdigital.biz/2011/10/23/help-for-a-crashing-iphoto-11/

  • Error message when importing data using Import and export wizard

    Getting below error message when importing data using IMPORT and EXPORT WIZARD
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    <dir>
    <dir>
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
    Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
    (SQL Server Import and Export Wizard)
    Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
    - Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
    identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information
    about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
    (SQL Server Import and Export Wizard)
    </dir>
    </dir>
    Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput().
    The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Smash126

    Hi Smash126,
    Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
    autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
    To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
    The following document about Add Data or Log Files to a Database is for your reference:
    http://msdn.microsoft.com/en-us/library/ms189253.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Freezing/hanging when taking pictures and videos  in i phone 4

    freezing/hanging when taking pictures and videos  in i phone 4 with flash on.

    Hi Mister.
    Let's try to answer your questions.
    - The E5 does not have a red light when you take pictures.
    - I don't know about battery life comparing with E6 and E72, just can say on the E5 is quite good. It has a 1200 mAh battery, you should check the others, but also the features of each one, i.e. the E6 is a touchscreen one, so it consumes more power.
    - It has a notification white light, around the navigation button.
    Regards.

  • I am unable to import pictures from camera to iphoto 9 or 11 without getting message saying "the file is an unrecognizable format"  They are JPG files like always but now i can only import from a CD.  What is the fix to this problem?

    I have always been able to import pictures from camera to iphoto without a problem.  Now, for some unknown reason our iMac and Mac Laptop will not import pictures from camera to iphoto 9 or 11...what is the fix to this problem?  It will only accept import from a CD.

    I have always been able to import pictures from camera to iphoto without a problem.  Now, for some unknown reason our iMac and Mac Laptop will not import pictures from camera to iphoto 9 or 11...what is the fix to this problem?  It will only accept import from a CD.

  • Bug: Lightroom 3.3 hang when importing video

    On Windows, Lightroom 3.3 will hang when importing .AVI videos when the following is true:
    - Move or Copy (not Add)
    - Rename Files is selected
    - Filename pattern includes "exposure"
    Changin to a pattern that only includes date and time will make the import succeed.

    If it really failed in ntdll.dll it might be a system issue.  Make sure you disable all real-time anti-virus processes, and make sure your Windows system is up-to-date.
    Otherwise, it will be hard to know what is going on. If it persists, open a support ticket with Adobe. Take a look in the event viewer to make sure you have all the details of the crash.

  • LR 4.4.1 on Win 8.1 suddenly started to hang when importing via usb from camera

    I'm running LR 4.4.1 on Win 8.1 on a fairly new toshiba laptop. Worked fine for a few months; but then I have been unable to solve the problem of Lightroom hanging when I try to import directly from my camera via USB. If I download pics from the camera using file manager, and then point LR at the new folder [once the camera is unplugged], it can then see the folder on the hard drive and will import them without issues. But if the camera is installed, going to the import screen hangs the application.
    I have tried:
    deleting the lock file
    installing and  running LR 5
    reinstalling LR 4disabling all the usb drivers, rebooting, and enabling
    disabling everything in the start menu
    deleting the preferences file and letting LR build a new one..
    I can import from the SD card reader, but I nervous about that as I have had card corrupted before and lost pics when downloading that way with other laptops.
    The camera is a Sony NEX-5N.
    Any ideas?
    Thanks!
    Steve
    >>>>>>>>>>>>>>>>
    event log
    Version=1
    EventType=AppHangB1
    EventTime=130472785590834411
    ReportType=3
    Consent=1
    UploadTime=130472785614981131
    ReportIdentifier=e398cb4c-f441-11e3-8274-0c54a53b1677
    IntegratorReportIdentifier=e398cb4d-f441-11e3-8274-0c54a53b1677
    NsAppName=lightroom.exe
    Response.BucketId=d13f242875f03ea1d90dc78320aec669
    Response.BucketTable=5
    Response.LegacyBucketId=-441099843
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=lightroom.exe
    Sig[1].Name=Application Version
    Sig[1].Value=4.4.0.11
    Sig[2].Name=Application Timestamp
    Sig[2].Value=514b016c
    Sig[3].Name=Hang Signature
    Sig[3].Value=d6ad
    Sig[4].Name=Hang Type
    Sig[4].Value=134217729
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.3.9600.2.0.0.768.101
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=1033
    DynamicSig[22].Name=Additional Hang Signature 1
    DynamicSig[22].Value=d6ad1c1631f1be3fa0be5f93b4b2ce60
    DynamicSig[23].Name=Additional Hang Signature 2
    DynamicSig[23].Value=8549
    DynamicSig[24].Name=Additional Hang Signature 3
    DynamicSig[24].Value=8549c91a68f857408d66008876c50f3c
    DynamicSig[25].Name=Additional Hang Signature 4
    DynamicSig[25].Value=5385
    DynamicSig[26].Name=Additional Hang Signature 5
    DynamicSig[26].Value=5385dfd8333f990f69c3337328fcba6e
    DynamicSig[27].Name=Additional Hang Signature 6
    DynamicSig[27].Value=fe0a
    DynamicSig[28].Name=Additional Hang Signature 7
    DynamicSig[28].Value=fe0aee3b66393cac999a4d8bcf79559c
    UI[3]=Adobe Photoshop Lightroom 64-bit is not responding
    UI[4]=If you close the program, you might lose information.
    UI[5]=Close the program
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    FriendlyEventName=Stopped responding and was closed
    ConsentKey=AppHangXProcB1
    AppName=Adobe Photoshop Lightroom 64-bit
    AppPath=C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.4\lightroom.exe
    ReportDescription=A problem caused this program to stop interacting with Windows.
    NsPartner=windows
    NsGroup=windows8
    ApplicationIdentity=DBF4960C829DDF3499464309618C63A9
    <moved from downloading,installatin,setting up - kglad>

    You must have Premier Elements that recognizes Videos.  Premier Elements is sometimes sold in tandem with Photoshop Elements so that both can operate seamlessly.
    Amazon has got special price for buying both packages together.  I believe it is a difference of about $20, i.e. you pay 20 bucks more if you buy both products.

  • Invalid Directory when importing pictures from my camera chip

    I get the following error message "The directory name is invalid" when trying to import pictures from my camera chip

    Hi Bob,
    I doubt your application can't recognize the path from camera chip. Please check and test.
    Best regards,
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can use camera connector with ipod nano v1.1?

    upgraded nano from 1.0 to 1.1, then is it possible to use nano with camera connector?

    Sorry, but no, that was not one of the changes made in the update.

Maybe you are looking for