Ipod has a folder with and excalmation mark

i just instaled itunes 7 for my computer then it asked me if i wanted to update my ipod pod and i said yes. so now my computer is not recgonising the ipod and i cant get to my music in the ipod. some advise would be nice

can you please elaborate on your problem?

Similar Messages

  • HT1338 My computer screen is grey and has a folder with a question mark on it

    If was just grey with apple then got it to safe start loads the bar then it shuts off what now

    A folder with a question mark at boot means the startup drive can't be found. It may be damaged or even dead as a doornail.
    Hold down the command and r keys at boot and use the Disk Utility app to see if it can be repaired.

  • Laptop turns on but has a folder with a question mark in the middle

    for the last month or so my computer has been acting weird. when i turnd it on one morning it wouldent load it just kept the apple sign logo on the screen then it would change too the circle with a line though it sign.
    now the logo doesnt even show up and a folder with a question mark on it is shown. is there a way to fix this problum and if so estimated how much...

    Hi wizy;
    It sounds like either your disk or the directories on your disk have been slowly going bad.
    Do you have a backup?
    The question mark indicates that your Mac is not able to find a system to boot from. I would suggest that you boot form the install media for your Mac and repair the disk with Disk Utility. Let us know the results of that and we can go from there.
    Allan

  • It has a folder with a question mark. Did I break it?

    I accidentally bumped into my Macbook a few days ago and it fell...I thought it was fine until later I tried to turn it on and, to my dismay, it has a blank screen with the exception of a folder with a question mark on it.
    Is it an invalid now? What do I do?

    Try this:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If the above doesn't help, but otherwise shows the drive is OK, then you need not replace the drive. However, you will need to reinstall OS X. You may do that without erasing the drive:
    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
    Now, if the drive is toast but still mounts you may be able to recover some of your personal data before replacing the drive:
    Basics of File Recovery
    Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. If you stop using the drive it's possible to recover deleted files that have not been overwritten by using data recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • My ipod has the folder with the exlimation point on it and isnt updating

    I downloaded the updater but nothing happens when i plug my ipod in. It asks plug in ipod to update i do and it doesnt reconize it. Does this mean i have to send it in or is there another problem?

    Besides downloading the updater, you must install it then run it.
    After you do this, run the updater and when it asks you to connect an iPod, connect to one of the ports on the rear of your computer. Then reset the iPod while it's connected: hold down the Menu and Select (center) buttons until you see the Apple logo. This will often get it recognized.
    <img src="http://i2.photobucket.com/albums/y1/kylejones/MarkJones.gif" alt="Mark Jones"
    Mark

  • Macbook has the folder with flashing question mark

    Yesterday as I was watching Netflix my Mac froze. I was skipping around an episode and then started opening a folder to do something else while it loaded and then it just froze. I thought maybe I was clicking on too many things at once or whatever and it got screwed up a bit so I closed it for a minute or two. When I opened it back up it had a (light) blue screen that wouldn't go away so I shut it down with the power button. Then when I turned it back it just had a white/gray screen for like a minute before the folder with the flashing question marked appeared.
    I've googled possible solutions but nothing seems to work. It won't boot up in safemode. One answer suggested trying to do comm-opt-P-R (can't remember what that was trying to do) and that didn't work. The screen would just go black and then start up over and over. When I just press the opt-key it takes me straight to Internet recovery. However, none of the options available work. I don't have the TimeMachine thing, I don't have a disk to reload the Lion software, and there's nothing to click on at all in the disk utility. All that's available in that is a disk0 and the Mac OS X Base System and I can't click on First Aid/Erase/Partition/Restore. I've opened up the startup disk and there's nothing that shows up.
    Is there something else I can try at home or should I just go ahead to the apple store? My Mac is under a year old still, but I spilled soda on it back in like October and had to get all the parts replaced so I don't know if that would do anything to the warranty....And if something does have to get replaced will I lose all my stuff? It was bad enough losing four months worth of data, I don't want to lose seven.
    Thanks for any help.

    As long as the parts were replaced by someone authorized to do the repairs, you should still be fine. This error indicates that they computer isn't able to find a disk to boot to.
    The "disk" to reload Lion is that internet recovery (also can be launched from command + r).
    Seeing as how you don't have the startupdisk in Disk Utility, I would recommend getting it into a store to see why that drive isn't detected. It could be something as simple as a loose SATA cable, or as catastrophic as complete hard drive failure. While you're at the store, I'd look into investing in an external drive to start running Time Machine...

  • 80gb iPod has red circle with and x

    My ipod (80gb) has a Red Circle with an X in the center...How Can I repair it?

    Hello Rudyg111,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPod Displays a Red "X" Icon
    http://support.apple.com/kb/ts1463
    Restore iPod from Disk Mode
    Disconnect iPod from your computer.
    Manually put iPod into Disk Mode.
    Open the latest version of iTunes and connect iPod.
    Restore iPod.
    Have a nice day,
    Mario

  • My screen has gone blank on startup and occasionally a grey folder with a question mark appears. I have tried rebooting either by pressing the start up with power or pram.. Neither attempts have worked ! My iMac is 2008. Please help :)

    My screen has gone blank on startup and occasionally a grey folder with a question mark appears. I have tried rebooting either by pressing the start up with power or pram.. Neither attempts have worked ! My iMac is 2008. Please help :)

    Hey Carolinearnold!
    I have an article for you that seems to address this issue and can provide some troubleshooting steps for you:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • My iPod Classic has started to display a folder with an explanation mark on it-no tunes! Is there an easy fix?

    My iPod Classic has started to display a folder with an explanation mark on it-no tunes! Is there an easy fix?

    Exclamation mark!

  • New hard drive in 2009 iMac has been installed and now I have a folder with a question mark displayed on start up.

    I installed a Barracuda 500 gb drive. When I attempted a reinstall based off an external hard drive using time machine, it showed an error message of not being able to complete the back up. This was after I formatted the new drive using disc utility. I reformatted a different external drive and let it make several back ups. I then put the new drive into the machine and now I only get the folder with the question mark. It is a late 2009 iMac. The OS updates have been through the on line store and I do not have back up discs. Everything SHOULD be backed up on my external.

    when you partition and format the new bare drive are you running off of an install disc in the optical drive? I have used the install disk for Leopard to access the Disc Utility (did not install Leapard, just used it to access the Disc Utility) as well as the machine prompting me to take action due to the new hard drive being recognized, again using disc utility and using the install disc provided by the hard drive manufacturer. All of these were done according to instruction as previously mentioned, on a reformatted and partitioned drive each time.
    What OS version are you nstalling on the bare drive before you attempt to restore from your Time Machine backup? I have not installed any OS on the bare drive. I do not have a copy of Lion 10.7.5  as I purchased it through the app store. I was under the impression I could reinstall all the data through Time Machine but that is proving elusive - frustrating.
    Are you trying to use the Time Machine "star wars" interface to restore or are you using Migration Assistant? I am not using migration assistant. I have been using the Time Machine restore application.

  • IMac won't boot and has flashing folder with question mark on gray screen

    I just bought a new iMac. I have been trying all week (with no success) to transfer files and apps from my previous iMac. The last time I tried to transfer, I used target mode on the old computer. It looked as if it was finally working, so I left with 2+ hours remaining on the transfer. When I returned, the computer was frozen and nothing would work. So I held the power button to turn it off. When I tried to turn it back on, there was only a gray screen with a flashing folder with a question mark. I feel like I have tried everything listed in other discussions. The only thing I am not able to try is to reinstall Lion because the new computer did NOT come with an OSX disc of any type. Any suggestions?

    Go to > OS X Lion: About Lion Recovery

  • I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

    I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

    Prep your new drive:
    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    After formatting has completed quit DU and return to the installer. Install OS X.

  • How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

    does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

    Hello Mokhtary123 and welcome to Apple Support Communities,
    It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
    But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
    A flashing question mark or globe appears when you start your Mac - Apple Support
    OS X Recovery
    http://support.apple.com/en-us/HT4718

  • I have a folder with a question mark and I hear the drive running I think my drive crashed

    I have an imac intel duel core   I run OSX  6.8   lately the gear has been hanging up a lot I keep haveing to shut down and force quit and reboot.  yesterday a folder with a question mark showed up.   today nothing shows up but I can hear the hard drive.   I booted up the os dvd for SL and it wont see the hard drive.  only the dvd player and idisk (which I can't use anymore )  I have disconnected my external storages.  I am now on my mac airbook chatting to you.  
    Do you have any suggestions as to what to do?

    Probably a crashed HD. Please carefully read Apple's Flashing question mark appears when you start your Mac article for trouble shooting steps. As  long as you have been backing up the system it's minor inconvenience of replacing the Internal HD and restoring from your backup. If you haven't been backing up then you are about to learn why backing up it's optional it's critical.

  • HT1310 when i starst my mac i get a flashing folder with a question mark. i tried rebooting and holding the option button then i get 2 boxes, one with a refresh arrow and one with a forward arrow neither of them seem to do anything. now what

    when i starst my mac i get a flashing folder with a question mark. i tried rebooting and holding the option button then i get 2 boxes, one with a refresh arrow and one with a forward arrow neither of them seem to do anything. now what

    Here is an article that describes what it is supposed to do:
    Startup Manager: How to select a startup volume
    If no Volumes are shown, it is telling you there are no potentailly bootable Volumes attached. That means your boot drive has died or the bootable image on it is unrecognizable.
    What Mac Pro ? by year, GHz, number of processors, screen size?
    What Mac OS X ?

Maybe you are looking for

  • Master table with two child tables in ADF Framework

    Hi, I'm trying to implement single master with two detail tables using oracle adf framework of Jdev 11.1.1.4.0. I'm able to do single master-detail by using view link but unable to achieve nested details block i.e., master with nested child blocks. I

  • LSMW using HR Infotype

    Hi All, My requirements is to do one LSMW project for the modification of DOB field in IT0002. The problem is the screen is different for various employees(Based on the configuration). Eg : Pernr   screen        1000   2000        1001   2001 So whil

  • How to *really* disable Color Management in PSE 7 Organizer?

    After much experimenting with old versions of PSE (2 and 3 specifically) and my Canon MP530 inkjet, I have found I get the best results by disabling PSE Color Management and using the Canon printer driver to manage colors. (Even when using the suppli

  • Pricing Conditions deactivation at header level of Sales Order

    Hello there, We have used a routine in pricing procedure (BaseType Routine) to deactivate condition MWST in the MWST condition line in pricing procedure, transaction V/08. In the routine, We played with the KINAK (set to K )and KOBLI (set to space) f

  • Doubt login as sysdba

    hi gems... i have noticed that : sqlplus yugtyugy/ssarhb as sysdba (means any garbage value as username and password) is allowed and all operations can be done such as startup and shutdown or backup....how is it possible???? is there any problem with