IPOD HELP!!! receiving 'Drive not ready: door open' message
My 3rd gen Ipod is on its last legs. For the past few months half the music on the ipod would freeze the ipod. Now ive tried restoring, resetting, reinstalling, etc etc... the thing is a paper weight. Every time i try to load new music on it, it A) freezes itunes and B) gives me a message saying, "drive not ready, door open" or somthing like that. What can i do? Anyone have this happen before and is it fixable? Am i stuck on buying a new ipod? Thanks for your help!!
Greg
I get the same error message. 3G iPod, ever since the latest updater and iTunes came out. I've reset, restored, uninstalled, etc...
Nothing fixes it.
Maybe Apple wants us to buy a new iPod?
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
Win XP, SP2
Similar Messages
-
"Drive not ready" message when copying files to iPod
I have had my iPod since 2004, and no problems, until recently. After updating most recent Updater, and restoring my iPod, I went to repopulate with my music files on a hard drive, and get this annoying "Drive not ready; door is open" message. It gives me opportunity to "cancel, retry, continue", but nothing works. Have restored several times now, and always the same thing. It will let me copy a certain amount of songs (about 500 or so) and then the message. I'm using a USB 2.0, and Apple dock connector, and have tried all ports available - so I know its not a connectivity issue. Is anyone else having this trouble after installing latest Updater? Any ideas? Thanks in advance.
hi
I'm having exacly the same problem. I have removed and updated everything I can think of to try to resolve this, including removing anti virus software. I can update to about 420 songs, and bang, the ipod / itunes / computer freezes. It seems that finding another computer to check whether it's the ipod or my home computer is the next option. Life is too short for this. My old MD was way less problimatic -
Windows - Drive Not Ready - isFile()
When checking to see if a file [using isFile() ] exists on a drive I get this dialog error message in Windows XP:
Windows - Drive Not Ready
Exception Processing Message c00000a3Parameters 75b6bf7c 75b6bf7c 75b6bf7c
I get this message if there is no media in the drive such as if I make the check on an empty floppy drive.
Is there any way to check if their is a media in the floppy drive before deciding to check if there is a certain file on it with isFile()?
Trying to catch the error does not seem to work - the error seems to originate from somewhere in the OS rather than from java.
How do I get rid of this error message? I have upgraded to JDK 1.5 - the problem did not occur in JDK 1.2 so somehow that earlier version was able to avoid this problem.
This is part of the code:
String iniFileName = DEFAULTINIFILENAME;
File[] possibleRoots = getAllPossibleRoots(); // Mostly a call to File.listRoots() with some fixes
File possibleIniFile = null;
Vector allFoundIniFiles = new Vector();
for (int possibleLocationNo = 0 ; possibleLocationNo < possibleRoots.length ; possibleLocationNo++) {
possibleIniFile = new File(possibleRoots[possibleLocationNo], File.separator + iniFileName); if (possibleIniFile.isFile()) {
allFoundIniFiles.add(possibleIniFile);
} // if
} // for
Edited by: Java-is-music on Sep 28, 2008 9:39 AM
Edited by: Java-is-music on Sep 28, 2008 9:40 AMThis should run on its own - just compile it and run it on Windows XP - using jdk 1.5 for instance. I checked on jdk 1.4 and it also gave the error.
The error is that this dialog window appears:
Windows - Drive Not Ready
Exception Processing Message c00000a3Parameters 75b6bf7c 75b6bf7c 75b6bf7c
// package testappl.sscce;
import java.io.File;
import java.util.Vector;
public class DriveNotReadyErrorMessage {
private static String DEFAULTINIFILENAME = "myconfig.ini";
public DriveNotReadyErrorMessage() {
File[] possibleIniFiles = getAllAvailableDefaultIniFiles();
/**Looks in all possible root locations and returns the found ini files.
private File[] getAllAvailableDefaultIniFiles() {
File returnIniFiles[] = null;
String iniFileName = DEFAULTINIFILENAME;
File[] possibleRoots;
possibleRoots = File.listRoots();
/* Nota bene. The error message due to an empty floppy drive
* can be avoided by calling:
* FileSystemView fsv = FileSystemView.getFileSystemView();
* and then checking if:
* ((fsv.isFloppyDrive(possibleRoots[a root no])) == false) { }
* but this just avoids the error message if the floppy is empty - not if other drives have no media.
File possibleIniFile = null;
Vector allFoundIniFiles = new Vector();
for (int possibleLocationNo = 0;
possibleLocationNo < possibleRoots.length; possibleLocationNo++) {
possibleIniFile =
new File(possibleRoots[possibleLocationNo], File.separator +
iniFileName); // File.separator + added to make it work on linux
System.out.println("Now checking for possible configuration file: " +
possibleIniFile.toString()); // Line added for debugging purposes only. Error appears here from what I can see
if (possibleIniFile.isFile()) {
allFoundIniFiles.add(possibleIniFile);
} // if
} // for
returnIniFiles = new File[allFoundIniFiles.size()];
File foundIniFile;
for (int foundFileNo = 0; foundFileNo < allFoundIniFiles.size();
foundFileNo++) {
foundIniFile = (File)allFoundIniFiles.get(foundFileNo);
returnIniFiles[foundFileNo] = foundIniFile;
} // for
return returnIniFiles;
} // getAllAvailableDefaultIniFiles
public static void main(String[] args) {
DriveNotReadyErrorMessage driveNotReadyErrorMessage =
new DriveNotReadyErrorMessage();
}Edited by: Java-is-music on Sep 29, 2008 1:08 PM -
Itunes.exe - drive not ready ? door is open etc
iPod ran out of power while uploading songs for iTunes, I have had many errors chkdsk etc since.
The iPod now seems to be recognized and starts downloading from iTunes but after aroung 15 songs comes up with the error message about the drive being open, the whole system then freezes and crashes.
I have updated iTunes, updated iPod, restored iPod twice, changed drive letter, ensured power to the USB hub all to no avail.
Any clues anyone ??Thanks for replying Katrina
ipod is fully powered, restored, updated and raring to go.
Everything looks okay and it even starts updating from itunes but after a random number of tracks it stops, thinks a while and then produces the error message
itunes.exe drive not ready
The drive is not ready for use its door may be open please check drive I (iPod) and make sure a disk is inserted and the drive door is closed.
I have spent 4 evenings wrestling with it and the wifes not happy!! -
Hello all,
Today I tried to sync my Ipod and I got an error message that said "Drive not ready". When I turned my ipod back on, it was wiped clean. Itunes was not seeing the ipod, then it was, and finally I was able to restore it. However, when it goes to sync up after being restored, it only gets up to about song 300 until I get this error message:
itunes.exe - Drive not ready
The drie is not ready for use; its door may be open. Please check drive \Device\Harddisk1\DR3 and make sure that a disk is inserted and that the drive door is closed.
Any suggestions?
Thanks!
LisaMy ipod was dead. It was trying to tell me that its little hard drive was worn out.
-
When I try to boot the CDROM from the ok Prompt I get an error.
Below is the error I get from my E450:
? 'mfg-options' environment variable invalid
Can't open input device.
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output. Keyboard not present. Using ttya for input and output.
? 'mfg-options' environment variable invalid
Sun Enterprise 450 (4 X UltraSPARC-II 480MHz), No Keyboard OpenBoot 3.18, 1024 MB memory installed, Serial #11263222. Ethernet address 8:0:20:ab:dc:f6, Host ID: 80abdcf6.
rebooting with command: boot cdrom
Boot device: /pci@1f,4000/scsi@2/disk@6,0:f File and args:
Drive not ready
Can't read disk label.
Can't open disk label package
Evaluating: boot cdrom
Can't open boot device
I�m having a really hard time trying to fix this problem. If anyone has any ideas, I would really appreciate the help.
Thanks in advance!I've got the exact same issue with an Ultra 60 on which I'm attempting to install Solaris 9. I've tried replacing the drive, replacing the CD, using the external SCSI connection and nothing works. Each time I attempt a boot cdrom I get the following error:
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
Drive not ready
Can't read disk label
Can't open disk label package
Can't open boot device
probe-scsi-all shows that my drive is being recognized.
What am I doing wrong?
Thanks in advance for any assistance anyone can provide. -
hello. My Itunes comes up and when I plug my Ipod in, a window pops up thats says disk drive not ready and shuts Itunes down
I tyed a go back but it did not work
thanks
Message was edited by: my wonderhave you check disk alias ?
exemple
disk /pci@400/pci@0/pci@8/scsi@0/sd@0,0
for disk0 booting.
I suggest you do the following:
ok show-disks
a) /sbus@7,0/SUNW,fas@3,8800000/sd
b) /sbus@3,0/SUNW,fas@3,8800000/sd
q) NO SELECTION
Enter Selection, q to quit: a
/sbus@7,0/SUNW,fas@3,8800000/sd has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/sbus@7,0/SUNW,fas@3,8800000/sd
{0} ok nvalias mydisk /sbus@7,0/SUNW,fas@3,8800000/sd@c,0
ok setenv boot-device mydisk
ok reset
I hope I helped you
Ruben -
Solaris 8 on netra T1 error - drive not ready
Hi I am hoping someone can help shed light on a problem we have encountered. I inherited a couple of very old netra t1 with solaris 8 on them. We had a major power outage whcih resulted in an issue with this server coming backup. On first looking at it i was able to get into the server via lom command prompt, i ran the power down command to gracefully shutdown and reboot but on starting backup the server is reporting 'drive not ready' and just hangs at this point.
apologies but i am a solaris novice, any help would be much appreciated. I am hoping this is something trivial....
thanks.Just to update we suffered another power outage and returned to look at hte server to find different error messages appearing, this time the server was giving me the option to try and boot or go into single user mode, which i did and ran the metastat and got the following:-
# metastat
d50: Mirror
Submirror 0: d0
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 43846353 blocks
d0: Submirror of d50
State: Okay
Size: 43846353 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
WARNING: /pci@1f,0/pci@1/scsi@8/sd@1,0 (sd1):
Error for Command: load/start/stop Error Level: Retryable
Requested Block: 0 Error Block: 0
Vendor: SEAGATE Serial Number:
Sense Key: Not Ready
ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
WARNING: /pci@1f,0/pci@1/scsi@8/sd@1,0 (sd1):
Error for Command: load/start/stop Error Level: Retryable
Requested Block: 0 Error Block: 0
Vendor: SEAGATE Serial Number:
Sense Key: Not Ready
ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
WARNING: /pci@1f,0/pci@1/scsi@8/sd@1,0 (sd1):
Error for Command: load/start/stop Error Level: Retryable
Requested Block: 0 Error Block: 0
Vendor: SEAGATE Serial Number:
Sense Key: Not Ready
ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
WARNING: /pci@1f,0/pci@1/scsi@8/sd@1,0 (sd1):
Error for Command: load/start/stop Error Level: Retryable
Requested Block: 0 Error Block: 0
Vendor: SEAGATE Serial Number:
Sense Key: Not Ready
ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
WARNING: /pci@1f,0/pci@1/scsi@8/sd@1,0 (sd1):
offline
c0t0d0s0 0 No Okay
d51: Mirror
Submirror 0: d1
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 8389656 blocks
d1: Submirror of d51
State: Okay
Size: 8389656 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t0d0s1 0 No Okay
d53: Mirror
Submirror 0: d3
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 4194828 blocks
d3: Submirror of d53
State: Okay
Size: 4194828 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t0d0s3 0 No Okay
d54: Mirror
Submirror 0: d4
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 8340543 blocks
d4: Submirror of d54
State: Okay
Size: 8340543 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t0d0s4 0 No Okay
d55: Mirror
Submirror 0: d5
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 6292242 blocks
d5: Submirror of d55
State: Okay
Size: 6292242 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t0d0s5 0 No Okay
d10: Concat/Stripe
Size: 43846353 blocks
Stripe 0:
Device Start Block Dbase
c0t1d0s0 0 No
d11: Concat/Stripe
Size: 8389656 blocks
Stripe 0:
Device Start Block Dbase
c0t1d0s1 0 No
d13: Concat/Stripe
Size: 4194828 blocks
Stripe 0:
Device Start Block Dbase
c0t1d0s3 0 No
d14: Concat/Stripe
Size: 8340543 blocks
Stripe 0:
Device Start Block Dbase
c0t1d0s4 0 No
d15: Concat/Stripe
Size: 6292242 blocks
Stripe 0:
Device Start Block Dbase
c0t1d0s5 0 No -
I have a VXI-850pc slot-0 controller that won't boot properly. Basically, when turned on:
1) the drive light is continuously lit, color - amber.
2) screen displays: Drive not ready, insert BOOT diskette in A:, Press any key when ready
Has the hard drive crashed? Any suggestions?
Thank you for your help!
JasonJason,
You deffinantly are having a HDD problem. It has either failed, the boot sector is corrupt. I would recommend using a boot disk to get into windows and run a scan of your HDD to test if it is okay. If the disk has failed, it is fairly striaght forward to replace and I can advise you on that process if you run into any snags.
-Marshall R
National Instruments
Applications Engineer
One stop for all your NI-VISA Support
GPIB Support has a new homepage -
"Drive not ready" can't boot the Sun Enterprise 250 Server 400MHz
Hi,
Because I can't ping it and got no response on the console, so I had to reboot the E250 server.
When I reboot SUN E250, I got the following message on the console and then it stops.
Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.16, 1024 MB memory installed, Serial #15131886.
Ethernet address 8:0:20:e6:e4:ee, Host ID: 80e6e4ee.
Drive not ready
When I turned to diagnostic mode, I got the
Rebooting with command: boot
Boot device: net File and args:
Using Onboard Transceiver - Link Up.
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
When I reboot it, I got the following message on the console and then it stops.
Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.16, 1024 MB memory installed, Serial #15131886.
Ethernet address 8:0:20:e6:e4:ee, Host ID: 80e6e4ee.
Drive not ready
When I turned to diagnostic mode, I got the
Rebooting with command: boot
Boot device: net File and args:
Using Onboard Transceiver - Link Up.
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
{0} ok printenv
Variable Name Value Default Value
tpe-link-test? true true
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
pci-slot-skip-list none none
pci0-probe-list 1,3,2,4,5 1,3,2,4,5
upa-port-skip-list none none
diag-level min min
diag-script normal normal
diag-targets none none
diag-trigger power-reset power-reset
diag-continue? false false
diag-passes 1 1
diag-verbosity tests tests
More [<space>,<cr>,q,n,p,c] ? env-monitor enabled enabled
mfg-options server
#power-cycles 142
system-board-serial# 5015440072176
system-board-date 3a06ad42
fcode-debug? false false
output-device ttya screen
input-device ttya keyboard
load-base 16384 16384
boot-command boot boot
auto-boot? true true
auto-boot-on-error? false false
watchdog-reboot? false false
diag-file
diag-device net net
boot-file
boot-device disk:a disk net disk net
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
More [<space>,<cr>,q,n,p,c] ? nvramrc
security-mode none
security-password
security-#badlogins 0
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
hardware-revision 80 80 80 80 80 80 80 80 ...
last-hardware-update
diag-switch? false false
{0} ok devalias
screen /pci@1f,4000/TSI,gfxp@5
disk5 /pci@1f,4000/scsi@3/disk@c,0
disk4 /pci@1f,4000/scsi@3/disk@b,0
disk3 /pci@1f,4000/scsi@3/disk@a,0
disk2 /pci@1f,4000/scsi@3/disk@9,0
disk1 /pci@1f,4000/scsi@3/disk@8,0
disk0 /pci@1f,4000/scsi@3/disk@0,0
disk /pci@1f,4000/scsi@3/disk@0,0
scsi /pci@1f,4000/scsi@3
cdrom /pci@1f,4000/scsi@3/disk@6,0:f
ta¾pe /pci@1f,4000/scsi@3/tape@4,0
pcia /pci@1f,2000
pcib /pci@1f,4000
pci0 /pci@1f,4000
flash /pci@1f,4000/ebus@1/flashprom@10,0
nvram /pci@1f,4000/ebus@1/eeprom@14,0
parallel /pci@1f,4000/ebus@1/ecpp@14,3043bc
net /pci@1f,4000/network@1,1
ebus /pci@1f,4000/ebus@1
i2c /pci@1f,4000/ebus@1/SUNW,envctrltwo
floppy /pci@1f,4000/ebus@1/fdthree
tty /pci@1f,4000/ebus@1/se@14,400000
More [<space>,<cr>,q,n,p,c] ? ttya /pci@1f,4000/ebus@1/se@14,400000:a
ttyb /pci@1f,4000/ebus@1/se@14,400000:b
rscctl /pci@1f,4000/ebus@1/se@14,200000:sspctl
rsc /pci@1f,4000/ebus@1/se@14,200000:ssp
ttyc /pci@1f,4000/ebus@1/se@14,200000:ssp
ttyd /pci@1f,4000/ebus@1/se@14,200000:sspctl
keyboard! /pci@1f,4000/ebus@1/su@14,3083f8:forcemode
keyboard /pci@1f,4000/ebus@1/su@14,3083f8
mouse /pci@1f,4000/ebus@1/su@14,3062f8
name aliases
{0} ok boot disk
Boot device: /pci@1f,4000/scsi@3/disk@0,0 File and args:
Drive not ready
{0} ok probe-scsi-all
/pci@1f,4000/scsi@3,1
/pci@1f,4000/scsi@3
Target 0
Unit 0 Disk IBM DDYST1835SUN18G S94N
Target 4
Unit 0 Removable Tape HP C1537A L706
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011007
Target 8
Unit 0 Disk FUJITSU MAJ3364M SUN36G 0804
Target a
Unit 0 Disk SEAGATE ST336704LSUN36G 032C
Anyone knows what's the problem and how can I fix it?
CheersYou either have a mechanically or electronically failed disk drive or else your Operating System (I an presuming it is Solaris on that SPARC system) is completely mucked up.
If it is the OS at issue, you will need to install everything fresh.
If it is the 18GB disk drive, you will need to replace it and install everything fresh.
Either way, at some point you will have to go get your OS installation media and install everything fresh. The solution is not that difficult to understand. -
Hi,
I have a problem: I try to install Solaris10 on a sparc 250 and if I type boot cdrom an err "Drive not ready".
What does this err means?
Thx.You either have a mechanically or electronically failed disk drive or else your Operating System (I an presuming it is Solaris on that SPARC system) is completely mucked up.
If it is the OS at issue, you will need to install everything fresh.
If it is the 18GB disk drive, you will need to replace it and install everything fresh.
Either way, at some point you will have to go get your OS installation media and install everything fresh. The solution is not that difficult to understand. -
5th gen ipod can receive but not send emails
5th gen ipod can receive but not send emails. I have iPad with same settings and no issues. Yet, I keep getting "cannot send mail" the user name or password for "[email protected]" is incorrect. Please assist. I am not running both accounts simultaneously
See:
iOS: Unable to send or receive email
Did it work before?
I suspect a error in the settings for the outgoing mail server. -
HT1459 the ipod is locked will not let me open it
the ipod is locked will not let me open it?
Hello debbienash55,
The following article details the options available for restoring access to your iPod Touch.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen -
Hp officejet pro L7590 all-in-one printers - 'door open' message
We have a 1 and 1/2 year old HP Officejet Pro L7590 all-in-one . "Door Open" message would not go away even if all the doors are intact, or after we shut it down and turn it back on after 60 seconds. We could not print, fax nor copy. We talked to HP customer service which no longer support this series. How can we bring our printer back to work?
There are at least three interlock switches that can cause this error. One is on the door that covers the ink cartridges, one is on the top lid (covering the "guts" of the printer) you lift up to service the printheads and the third is on the back duplexer; if you don't have a duplexer, there should be a cover in place. You'll need to check all three to be sure they're in working order.
I know the door covering the ink cartridges has a tendency to break off the little tab that keeps the door closed so that would be the first one I'd check. The top lid that covers the "guts" of the printer also has a small tab that goes into a hole that activates an interlock switch. If that tab is broken off, the switch does not get closed, giving you the error message you see. I've seen this broken off also, usually from closing the cover when misaligned with the receiving hole. If this one is missing, you can ball up a small piece of paper and shove it in the hole to activate the interlock switch.
The 7590 is a great printer. Much better built than the newer models and cheap to operate, IMO. Hope you can get it working again. -
How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but the touch screen doesn't work to unlock the phone or select anything. We want to save/transfer pictures, contacts, and music to the replacement phone.
Try backing it up to your computer with iTunes. Connect it to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now. Also go to File>Devices>Transfer Purchases to transfer you apps and other purchased media to your iTunes library.
Maybe you are looking for
-
How to copy keywords from one image to many in Bridge CS6 (workaround)
I see a few questions about how to do this, but I didn't see this workaround (maybe it's even the workflow Adobe had in mind). Hope it helps others searching for this. To copy keywords from one photo, and then apply the same keywords to many, in Brid
-
Vendor service tax at the time of down payment
Hi sap Guru's Service Tax payable on Vendor Advances at the time of down payment. Requirement: New tax code X5 need to create with CST@5% on 80% of Bill value and service Tax @12.36% on 70% of Bill value. While calculating the CST amount, system shou
-
"Last devices used" menu every second over Ovi map...
Hello all, I installed Ovi Maps on my phone, and have a huge problem with it: Every second the"Last devices used" pops up and goes away again. Since a few years I own (and use) a Nokia N95, and I just used 'Setup Nokia Maps Update 1.0.8.exe' to get O
-
Photos look blurry only when using Slideshow
When I select an iPhoto album to view as a slideshow the photos appear blurry during the slideshow. When not using slideshow, when I open individual photos in iPhoto6 they appear blurred for maybe 2 seconds before snapping into sharp. The thumbnails
-
Tuxedo6.5, Jolt 1.2
What is the latest Rolling Patch level for Tuxedo 6.5 and Jolt 1.2? Any idea? Thanks in Advance