IPod Hi-Fi not fully supporting new iPod classic yet ?

i got my new classic as a replacement for an old gen3 iPod that was never fully supported by my iPod Hi-Fi, because it was already quite old, when the Hi-Fi was released.
now that i have the classic, i was expecting that to be fully supported, meaning the additional menu option 'speaker' should appear, when i dock it into the Hi-Fi, but it doesn't !
instead the light on the Hi-Fi keeps blinking green for a while. it has never done that before with my old iPod. so i checked the manual, but couldn't find an explaination that made any sense ?!
am i expecting too much, or am i doing something wrong ?
otherwise i hope this is something that will be fixed with the first iPod-software-update for the new classics soon ?

First, unplug your HiFi from power for about 5 minutes and then plug it back in and try again. If that doesn't work:
Put the iPod back in the HiFi dock and Reset the iPod (hold down the menu and center buttons for 6 seconds) and see if it fixes your problem.
If it doesn't, try connecting something to the Aux connector on the HiFi and see if you can hear it. If you can, then the dock connector may be damaged on the HiFi and you need to take/send it in for service.
Message was edited by: deggie

Similar Messages

  • In trying to update itunes to version 10.7 I get messages that older versions of "Bonjour" and "Apple Software update" cannot be removed and so the update fails. Itunes works well on my old ipod nano but not on my new ipod touch? Any ideas

    Any ideas as to how I can update an older version of iTunes to at least version 10.7 given the problems I'm having with "bonjour" and the "software update"?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • I have just bought an iPod Nano to replace my previous one which died,when I open my iTunes it does not show the new iPod, and refuses to allow me to sync my existing library, the new iPod does not show in my computer only on devices, any suggestions ?

    Question: I have just bought an iPod Nano to replace my previous one which "died" My computer does not recognize the new iPod and only shows it in devices and printers. I cannot sync my existing iTunes to the new iPod, there is no way I can do it. Any help please?

    Hey there longislandmacca,
    It sounds like your iPod is not recognized in either Explorer, or in iTunes on your PC. That can be frustrating, expecially when its a new device. I recommend you use the following article to help resolve that issue named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Computer does not recognize my new ipod model A1446

    My computer does not recognize my new ipod model A1446.  Cannot set up or sinc

    You are under warranty.  Call iPod Nano tech support. 

  • I just bought a new ipod and I'm trying to download my itunes library and games but itunes is not recognizing my new ipod. I have followed all the instructions from apple asistant except deleting and reinstalling itunes.  What can I do.

    I bought a  new Ipod (5th generation).  I am trying to sync it to my itunes.  I tunes does not recognize my new ipod. It is registered.  I was only able to download purchases I made from my old ipod.  I cannot download my itunes library or any of the games I have purchased. I tried using the troubleshooting guide to no avail.  The only thing I did not do was to uninstall and reinstall itunes.  I did update it to the latest version. How can I get  itunes to recognize my new ipod?

    - You do have iTunes version 11 on the computer, right. Saying the latest is not sufficient.
    - Have you tried everthing here:
    iOS: Device not recognized in iTunes for Windows
    - You should
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Your library/media will not be affected.
    - Does the iPod charge?

  • S my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!

    my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!

    Try:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • HT1351 My 2nd generation iPod Nano is not showing my new playlists after syncing (the playlists were created in my computer).  Help!

    My 2nd generation iPod Nano is not showing my new playlists after syncing (the playlists were created in my computer).  Help!

    So, your iPhone (and new shuffle) still work properly with iTunes, correct? 
    Your 1st gen shuffle... It's the white one with USB plug, that looks like a USB flash drive...?
    Are you able to see it in Windows, and maybe change the drive letter back to E:?

  • Will a ipod nano charger work with a new ipod touch?

    will a ipod nano charger work with a new ipod touch?

    If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

  • Is true that I can change my ipod nano 1 generacion for the new ipod nano in any store?

    i want to know if is true if  I can change my ipod nano 1 generacion for the new ipod nano in any store?

    No, you have to send the iPod into Apple in exchange for a 6G Nano. See this page for more information.
    http://www.apple.com/support/ipodnano_replacement/
    B-rock

  • I have an ipod 4 can i connect to pc and, using itunes match, store all music off ipod and then transfer to a new ipod 5?

    i have an ipod 4 can i connect to pc and, using itunes match, store all music off ipod and then transfer to a new ipod 5?

    hI, bella
    I also met this issue a few days ago and I finally find out how to transfer music from iPod to computer:
    1. Plug your iPod in and wait for the computer to recognize it.
    2. Open up 'My Computer' and under 'Devices With Removable Storage', double click and open apple iPod.
    3. Click on 'Tools' at the top of the window and drag down to 'Folder Options'.
    4. Under the 'View' tab, find the subfolder called 'Hidden files and folders'.
    5. Select the option 'Show hidden files and folders'.
    6. Click 'OK'.

  • Is there any shop in texas ,austin where we can replace an old ipod touch 3G and get a new ipod touch 4G ??

    Is there any shop in texas ,austin where we can replace an old ipod touch 3G and get a new ipod touch 4G ??
    pls help mee

    Sorry but I am pretty sure there isn't a shop which offers such a service.
    Apple stores offer a 14 day remorse period where you can return a purchase for a full refund without having to give a reason however this has probably expired - unless you bought from a different store with a similar system which you still happen to be within the time limit for.
    Your best bet would be to sell your iPod 3G and put the money towards a new one. If you are having trouble selling it an Apple store will take it and give you 10% off a new iPod.

  • I lost my ipod and do not have find my ipod on it can it still be tracked?

    i lost my ipod and do not have find my ipod app on it can it still be tracked?

    No.
    Sorry.

  • The flexfield in table-in-table is not fully supported yet

    Hi OAF Guys,
    while creating requisition, when I select the approver and click on the Next button, the following error is coming.
    the flexfield in table-in-table is not fully supported yet
    any patch i have to apply for resolving this issue?
    I am working on 11.5.10.2 instance
    Thanks & Regards
    Palakondaiah.u

    Probably there is a flexfield component inside a table-in-table and raised this error. You can check the page hierarchy by clicking the "about this page" link.
    The error message is a developer mode error, usually it is for developer only. You can turn it off by setingt profile FND: Developer Mode / FND_DEVELOPER_MODE to "No".

  • Screen not rotating on new iPod Touch

    Got a new ipod Touch 5th Gen and the screen doesn't rotate. Checked and the portrait view is not locked. Anything else I should do or check? Thanks.

    What apps have you tried? Not all apps support screen rotation. Try Safari, that supports rotation.
    If astill problem:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Video not working on new ipod nano (3rd gen)

    Just bought a new generation ipod nano. When registering, I got a free movie short and a TV show episode. It did not seem to fully download on to Itunes. I have updated itunes to 7.5. I get an error message that says that I can't play video on my new ipod nano, which it clearly has the capability to do. Any suggestions? Not sure how to re-download freebie video and TV shows.

    Does the video play in iTunes
    if so right click and select "convert to ipod/iphone format"
    if not click "store" in the bar and click "check for purchaces"

Maybe you are looking for

  • File from AFP volume vanished!

    I had a user yesterday attempt to modify the name of an InDesign CS3 file she had been working on a shared volume and it just disappeared on her. She stated that there was a error "30 or something" and then the file just disappeared. I did a search m

  • Should I create a new Apple ID for new device?

    Hi, I just got a iPod Touch and I also own a iPhone. Should I create a new Apple ID for the iPod Touch or share with the existing one for the iPhone?

  • Help needed in Logical Database Programming

    Hello Gurus, I am working on a Report on ASSET ACTIVITY BY DATE RANGE . The program is copied from std. program S_ALR_87011990. The above std. program displays for the whole financial year. This is modified for a particalar period range in the new le

  • IPod rolls through various icons - won't mount

    Hi! I am trying to help a friend with his iPod click wheel. It stopped mounting on his PC and just gives the exclamation mark and folder. I tried it on my mac, and it cycles through 3 screens - the 'do not disconnect', the exclamation mark and folder

  • Running out of memory with Tomcat !!!!!

    Hello gurus and good folk: How can I ensure that the a JSP page that sets a ResultSet doesn't run out of memory? I have set the X flag to j2Se to be 1024mb and still runs out of memory! The size of the data being queried is only 30 MB. One would thin