Ipod in dfu mode

Hi, i am in really big trouble, as on the 28th i decided i shoul update my ipod software to IOS 5. I plugged it in and downloaded it but unfortunately as it was installing to the ipod, i thought it was taking a while, and decided to try to cancel it, and in the end i unplugged it. Then i started to worry when it got put in dfu mode, now itunes won't even recognise it! Windows recognises it being plugged in and unplugged, i have been trauling through loads of websites to find out how to help it. I have also tried restarting and shutting down my laptop. Please help. (ipod touch 4th generation)

Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
  Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

Similar Messages

  • Okay, so i put my ipod in DFU mode to restore it. well now it is in the middle of restoring ipod software and the bar hasnt moved. what do i do?

    okay, so i put my ipod in DFU mode to restore it. well now it is in the middle of restoring ipod software and the bar hasnt moved. what do i do?

    - Cancel the restore. Force close iTunes if necessary. Disconnect the iPod and reboot the computer and try again.
    - Next try on another computer
    - Make an appointment at the Genius Bar of an Apple store.

  • My ipod exits dfu mode

    why does my ipod exits dfu mode in the middle of the restore

    Does iTunes see the iPod? Was the restore successful that it is went through all the steps without errors?

  • When I put my ipod into DFU mode, does it lose all of the photos and songs?

    Just wondering.

    No, all of your data will stay on the iPod Touch
    I have put my iPod Touch 2nd gen in and out of DFU mode at least 10 times.

  • Restore iPod in DFU mode?

    Hey their Apple communities
    I have an iPod touch that definantly has viruses on it. I want to restore and update. If I were to enter DFU mode would this stop the viruses fro transfering to my computer? Also, after I done this would the viruses be completely wiped off my iPod?
    Thanks and I hope you can answer my question

    No, don't wipe it.  If it definitely has viruses on it then it is probably a valuable historical artifact because it would likely be the first. 
    What proof-positive do you have that it has a virus?

  • I tried to put my ipod in dfu mode and now it wont turn back on?

    my ipod was diabled and it said i had to connect it to itunes. then i was told to put it into dfu mode. i tried to do that but now my ipod wont turn back on. HELP?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201210 I tryed puting my ipod on DFU mode but happend, the screen went black now i cant restore it or start?

    Cant switch on

    What happened before you placed it in DFU mode?
    Does iTunes see the iPod?
    Does iTunes anything when you connect the iPod to the computer?
    You really have not given us enough information to help you.

  • My iPod Touch 3G is in DFU Mode and I can't get it out of it,how do i do this?

    A few days ago i got my iPod into DFU mode and i can't get out of it.I've tried installing the new iOS but that hasn't worked and it wouldn't restore in iTunes.Please Help!

    How did you get your iPod into DFU? I can't get mine into it and I have a 3G. And to get out of it I know you have to press and hold the Home and Power button together till you see it start up.

  • Ipod stuck in DFU mode will not restore

    i put my ipod in DFU mode becouse it wouldnt go into recovery mode now due to code 3194 i cant restore it and it will not do anything.  it is just a black screen and im worried that its broken    Anyone know how to fix it?

    See:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    How to solve iTunes error 3194 in 10 simple steps

  • DFU Mode not recognised in iTunes?

    Hi everyone :) Recently I put my iPod into DFU mode, to do a restore. However, when I put it into DFU mode, iTunes did not regocnise it. I'm aware that recovery mode is a similar thing, but I'm worrying about the DFU mode. I'm on an iPod Touch 4th Generation running iOS 6.1.3. I put another iPod running on the same software in DFU mode and its regocnised. Does anyone know why mine is not being recognised? Thanks in advance :)

    Does it charge/get warm when connected?
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

  • Nano 2G DFU Mode (Stuck) Cannot do anything

    I have a red 2nd Gen nano 4gb .
    I unplugged the cable during restore and now its corrupted .
    Here is the story:
    I had the white blank LCD problem , the ipod would work and play , but no display unless i do a restore which would temp fix the problem .
    Anyway .. after trying a hundred restores and resets i decided to corrupt the firmware (by unplugging the cable during restore) in the hope that the ipod firmware can be completely erased and re-written with restore in itunes .
    Now i the computer is finding an ipod in dfu mode
    Itunes is saying that it cant recognize the ipod
    I've tried reseting the ipod but it doesnt help .
    I cannot see what is on the display because the lovely blank lcd prob is still there .
    Any ideas ?? Its a shame to throw away a 100% scratch free nano .. Please help

    Have you tried using it with a program other than itunes, such as Sharepod.exe?
    Also, if you have disk mode enabled, open it as a drive, and go to iPod_Control\Device. Look for a file called ExtendedSysInfoXml, and see what it says about the display.
    I've unplugged the cable during restore (I've tried everything and anything to get the nano to unlock). It doesn't do a thing for unlocking, but it also didn't kill the display screen either.

  • Restore through DFU mode, lost content!

    i restored my ipod through DFU mode, and lost all the apps, music, and all other content. I restored it through the previously synced version, and still no content. How do i get my apps back?

    I understand. Thanks. Maybe I should rephrase my question.
    I had come to the conclusion that I needed to do a restore of my iPod from a backup, since I was having a big problem. Since I was going to restore from the same backup, regardless of which method I chose, would more data from that same backup have been restored if I had chosen the "recovery mode" instead of "DFU"? I'm asking because it seems that once you get past the factory OS re-installation, the steps to restore from a backup seem to be the same, no matter which method you choose. So, would using "recovery" mode restore more data from a backup than "DFU" mode would? Like, would data be pulled from a backup any differently if I had chosen "recovery"? Thanks again, and sorry if I sound redundant.

  • My ipod touch is in dfu mode and does not want to turn on.

    my ipod touch is in dfu mode and does not want to turn on.

    What happens when you connect the iPod to your computer and restore viia iTunes?

  • Help!! Ipod couldn't update, so tried to DFU mode and it still wont update or even turn on!!

    Help! My Ipod touch won't update! When I try to update it gives me a "network timed out" error message. I have tried everything. Disabling my antivirus, turning off my firewall, changing the time sync. So I tried to restore it in DFU mode, but it still is givng me a "network timed out" message. Now my ipod is blank and won't restore or update. What can I do? Have gone both to the apple store and geek sqaud for help and both blame it on each other. Any ideas?

    Disabling the computer's security software (firewall and antivirus) usually resolves that error.

  • HT1349 hi, i am trying to enable my sons disabled ipod touch after he changed the passcode and forgot about it. I can get it into dfu mode but when im trying to restore it using itunes it keeps tripping out with an error message saying could not be restor

    hi
    my son has disabled his ipod touch and has forgotton the pass code, i have followed all the websites and got it into dfu mode but when itunes is restoring it back to its factory settings it is telling me that there are about 35 hours to go and then an error message comes up saying a problem with uploading and that my network isnt working (which is wrong) and to try again......donr this about 10 times now and everytime get the same error message......any help would be much appreciated
    cheers
    Paul

    Ask him if he has 'jailbroken' the ipod touch. Some jailbreaking firmware resets it to Ipad firmware and so it is very difficult to restore as itunes simply doesnt recognise it for what it is. It's Apple's solution to try and stop mass jailbreaking.

Maybe you are looking for

  • How to setup photo structure after switch from Windows?

    Hi Colleagues, Have changed all computers at home from Windows into Mac. As a result have new Air and Pro Retina plus NAS system by Qnap. WIth windows was having a regular photo file structure that was stored on NAS. This "library" has approximately

  • How do I get my Powerbook G4 to stop looking for a PPPoE server?

    I was given an old PowerBook G4 and while I am using it, a message keeps popping up.  The message says, "Internet Connect.  Could not find a PPPoE server."  I don't know how to get this to stop.  Please help me.  Thanks.

  • Policy Nat ASA 8.6(1)

    Going from a Pix 515E to an ASA 5515 and trying to mirror the configuration.  I believe I have most of it correct, but this one issue persists that I'm trying to get resolved.  There are a number of vpn tunnels that terminate on the Pix and on some o

  • AirPlay works for everything except Stan.

    airplay works for everything from the iPad, youtube, iTunes etc. no drop outs, clear as day. When using Stan it connects and streams for about a minute, then the air play connection drops out. Re connects but at best plays for a minute. Router in nex

  • Label Size in SAP GLM

    Hello Experts, first, when we create the lable in CG42 --> Create Lable.. there we mention the Height and Width of Label. i.e. Size of the Label Secondly, in Customizing ( SPRO ), in EHS> Product Safety> GLM--> Label Size,  here also we define the La