IPod is automatically disconnecting immediately after initially connecting
iPod Classic with 160GB memory
currently has about 105GB loaded
While it generally seems to be working well to play music etc, when I open iTunes on my computer and then try to connect the iPod to the computer so that I can add new music etc., it first goes through the normal process of synching but, as soon as that process is complete, it immediately starts the ejecting process all by itself. After the iPod indicates that it is has completed the ejecting process and that it is okay to disconnect, however, the iTunes on the computer still shows the iPod as connected and lists all of the songs, etc., but you cannot play any of them.
This happens on both my home computer and on my office laptop computer this morning. (Both are PC's and both have iTunes set to manually manage my music.)
Any thoughts or suggestions?
Hmm. Well, since the problem happens on both computers, the problem more than likely lies with the iPod itself. The iPod's software may have become corrupt in some way and may need to be restore via iTunes. Keep in mind that restoring will erase all the music and files from your iPod so make sure they are backed up on at least one of your computers. However, that is not a guaranteed fix and I don't think you really feel like reloading all 105 GB of music on it.
Maybe try manually putting the iPod into Disk Mode while connected and see if that helps the iPod stay connected and mounted properly.
http://support.apple.com/kb/HT1363
Other than that, I don't know of any other way to handle this situation and am out of ideas or potential solutions. Maybe try completely uninstalling iTunes and then re-installing. (There is a link right that the beginning of the document if you have Vista)
[Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP|http://support.apple.com/kb/HT1925]
B-rock
Similar Messages
-
Ipod disconnects immediately after being connected to computer
Every time I plug my iPod into my computer it says "Connecting" then it says "Ejecting" and then "OK to disconnect"! WHY????? It does not show up in the sidebar in iTunes, and it does not show up in My Computer.
I have plugged it into every USB port on my computer, none of them worked
I have already updated iTunes.
I have already put the iPod in disk mode.. that did NOTHING.
I know it's not a problem with my USB ports, because other devices work JUST FINE in them
I know it's not an issue with the USB cable because I plugged my iPod into another computer and my iPod did not disconnect right after being connected
PLEASE help me get my iPod to work on this computer. And I don't want answers telling me to use the other computer. My Library is on THIS computer. Not only that, iTunes doesn't even work on the other computer.Reset the Bose device
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Need Help! Ipod disconnects immediately after I connect it.
When I plug my 80 GB Ipod classic into my Windows PC it will connect and then immediately eject my ipod. I have tried multiple ports and Ipod usb cords and it still has this problem can someone please help me solve this?
Have you tried to reset the ipod by pressing the menu and select buttons at the same time until the apple logo shows then connecting it?
You could also try putting it into disk mode first, instructions are in this article http://support.apple.com/kb/TS1372 -
I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with same car, its working fine, how 2 resolve ?
Morning Indrajit Chatterjee,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Best of luck,
Mario -
SMTP error from remote mail server after initial connection:
Hello folks. I having some serious issues sending email to clients with .mac accounts. I keep on getting the following error. Can someone help? I have replaced email address names with "Blank@...) for obvious reasons.
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
[email protected]
SMTP error from remote mail server after initial connection:
host smtp-mx1.mac.com [17.148.20.64]: 452 try later:
retry timeout exceeded
------ This is a copy of the message, including all the headers. ------
Return-path: <[email protected]>
Received: from ip72-207-229-240.br.br.cox.net ([72.207.229.240] helo=[192.168.0.102])
by srv3.purenrg.com with esmtp (Exim 4.68)
(envelope-from <[email protected]>)
id 1JFeOb-0001FZ-5F
for [email protected]; Thu, 17 Jan 2008 18:43:41 -0500
Message-Id: <[email protected]>
From: "[email protected]" <[email protected]>
To: Cindy Barnes <[email protected]>
Content-Type: multipart/alternative; boundary=Apple-Mail-3--1032078955
Mime-Version: 1.0 (Apple Message framework v915)
Subject: invoice 520 is overdue
Date: Thu, 17 Jan 2008 17:43:40 -0600
X-Mailer: Apple Mail (2.915)
X-PopBeforeSMTPSenders: [email protected]{
--Apple-Mail-3--1032078955
Content-Type: text/plain;
charset=US-ASCII;
format=flowed
Content-Transfer-Encoding: 7bitI'm sure someone will give more detail, but it looks like the server blocked your address because it thinks it's a spam source. If you're not spamming, then it might be someone on the same network spamming, or malware on your computer doing it. Or it could just be a mistake. try calling whoever runs your mail server and see if they can give you more information.
-
IPod Class Automatically Disconnecting While Synching
Ok I managed to solve my previous problem and now when while I'm synching my music onto the iPod,it automatically disconnects causing the whole sync to completely stop.Any idea why ?
Hmm. Well, since the problem happens on both computers, the problem more than likely lies with the iPod itself. The iPod's software may have become corrupt in some way and may need to be restore via iTunes. Keep in mind that restoring will erase all the music and files from your iPod so make sure they are backed up on at least one of your computers. However, that is not a guaranteed fix and I don't think you really feel like reloading all 105 GB of music on it.
Maybe try manually putting the iPod into Disk Mode while connected and see if that helps the iPod stay connected and mounted properly.
http://support.apple.com/kb/HT1363
Other than that, I don't know of any other way to handle this situation and am out of ideas or potential solutions. Maybe try completely uninstalling iTunes and then re-installing. (There is a link right that the beginning of the document if you have Vista)
[Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP|http://support.apple.com/kb/HT1925]
B-rock -
Trouble syncing iPod after initial connection
We just purchased a 5th gen iPod, and we're having some trouble getting it to sync with our Mac mini Core Duo. When we connect it via the included USB cable, it will appear on the desktop, trigger iTunes to start up, and perform a sync. However, the problem arises if we try to manually sync the iPod again after that first sync. When I go into iTunes and right click on the iPod and select "Update iPod", iTunes hangs for a minute with no indication that the iPod is syncing. If I try to right click on the iPod and select "Options", I am able to choose different options, but after clicking "OK", iTunes hangs for a minute and then reports "Preferences were not safed for the iPod "xxxxxx" because it could not be found." Basically, it seems like after that first sync, the iPod disconnects and will not reconnect.
Additional notes:
* I have tried the "Five R's", although the "Reinstall" part did not work - when I tried to run the iTunes installer, it told me there was "nothing to install". Presumably because I already have the latest version of everything.
* I did put the iPod into diagnostic mode, and it passed all tests successfully.
* Even when the iPod fails to sync, it does continue to charge... so it appears that the connection is at least working somewhat.
* If I set the iPod into Disk Mode, it seems to work fine. However, to do this, I either have to use the key combination to force it into Disk Mode, or REALLY QUICKLY set up the options to do so while it is performing its initial sync after being connected. As I said before, after the initial sync happens, and the iPod disconnects, I can't save any of the options.
* When I connect my 4th Gen iPod via the 5th Gen iPod's USB cable, it exhibits the exact same symptoms as the 5th Gen iPod. That leads me to believe the problem is not in the iPod itself, but possibly in the cable, the mini's USB port, or in the software. I have tried plugging in to all four USB ports on the mini with the same results. The 4th Gen iPod works fine when plugged in via FireWire. And of course the 5th Gen doesn't support FireWire, so I can't try that.
Any suggestions?
Mac mini Core Duo Mac OS X (10.4.6) 2gb RAMYou're not alone. I have the exact same problem as
you. I had a 3G iPod before and it worked perfectly.
I'm glad to hear that someone else is having this problem. I'm totally baffled as to what the issue could be. I'm going to list every place I think there could possibly be a problem, and any steps I've taken to rule it out:
1. Hardware problem inside the 5th gen iPod.
- I have run all of the self-diagnostics, and they passed with flying colors. The iPod plays back music, photos, and video just fine. Also, I have the same problem with the 4th gen iPod, when it is hooked up via USB2. The 4th gen works fine when hooked up via FireWire.
- Conclusion: not the problem.
2. Hardware problem with my USB cable.
- I took my iPod to the Apple Store and hooked it up using their USB cable, and experienced the same problem. Also, the iPod charges normally in any case, and it syncs over my USB cable just fine if it's in disk mode.
- Conclusion: not the problem.
3. Hardware problem with a USB port on my Mac mini.
- As noted in #2, I took my iPod to the Apple Store and hooked it up to one of their Mac minis, and it had the same problem. Also, I plugged the iPod into all of the ports on my Mac mini and got the same results with all of them. All of my other peripherals work fine on all of the USB ports (printer, card reader, camera, mouse, keyboard).
- Conclusion: not the problem.
4. Hardware problem on my Mac mini other than the USB port.
- As noted in #3, I had the same problem when I hooked my iPod up to the Mac mini in the Apple Store. Also, I have run the Apple Hardware Diagnostics CD on my Mac mini and it did not come up with any problems.
- Conclusion: not the problem.
5. Problem with the iTunes software on my Mac mini.
- As noted earlier, I experienced the same problem when hooking up with the Apple Store's Mac mini. Also, my 4th gen iPod works just fine when connected via FireWire.
- Conclusion: not the problem.
6. Problem with the Mac OS X software on my Mac mini.
- As noted earlier, I had the same problem on the Apple Store's mini.
- Conclusion: not the problem.
7. Problem with the Firmware on my iPod.
- I had updated my iPod to firmware 1.1.1, but even after downgrading it to 1.1, I had the same problem. And I'm having the problem on my 4th Gen iPod when it is hooked up via USB, and it has a totally different firmware.
- Conclusion: not the problem.
8. Problem with the iTunes music library on my Mac mini.
- I reset the iPod using the iPod Updater, wiping out all of its data. I then created a fresh user on Mac OS X, logged in to it, and connected the iPod. That user had no iTunes library at all, so other than the preferences, no data was being synced to the iPod, and I STILL had the same issue.
- Conclusion: not the problem.
Ok, so all of those are not the problem. So what could the problem be? Well, let's try a few theories:
Theory A. This is a problem that affects all Mac mini Core Duo users who are syncing iPods over USB2.
- If this was true, wouldn't we be hearing a lot more complaints? I suppose if most of the users had their iPods set to disk mode, then they would never notice the problem.
Theory B. Um... I don't have any other theories.
I've thought about taking the iPod back and swapping it for a new unit, but based on all of the troubleshooting I've done, I don't see how that could make any difference, since I'm experiencing the same problem with my 4th gen iPod.
Anyone want to take a stab at it?
Mac mini Core Duo Mac OS X (10.4.6) 2gb RAM -
[Work around] iPod Classic automatically disconnects when open itunes (PC Windows Vista)
I have a:
iPod Classic 120GB
HP Pavilion Laptop
iTunes 10 (latest)
Windows Vista OS (32-bit)
THE PROBLEM
I connect my iPod to my laptop with a working usb cable. The computer recognises the iPod as is shows up as a drive in "My Computer". But as soon as I open iTunes program, iTunes recognises the iPod for a few seconds, then automatically disconnects from the program and the computer.
Only after updating my iTunes to 10 have I encountered this problem.
I have tried all the suggestions on the apple forums and others to no avail.
THE WORK-AROUND
Calling this a work around simply because it is definately not a solution. and developers should really get off their backsides and fix this bug.concerning the problem of iPods (particular the older models) automatically disconnecting.
When connecting the iPod to the computer (NOT IN ITUNES), open the iPod drive through "My Computer", keep that window open as a folder, then proceed to run iTunes. This should allow you to use iPod through iTunes as normal.
NOTE: this is not a superfix and may not work for everyone, but it won't hurt to try. for more drastic but permanant solution, switching to 3rd party software might be for you. I have tried Songbird and had no problems link: http://www.howtogeek.com/howto/29716/heres-five-alternatives-to-itunes-10-for-ea sily-managing-your-ipod/
Hope this helps. PeaceI'll give this a shot, thank you for posting. I don't want to say I'm glad it's a bug but it's better then two brand new ipods in 10 days being crap.
-
IPOD NANO Automatically Disconnects
I have 3 IPOD's a 40gb 4th gen, a MINI and a NANO. Songs from ITUNES transfer to the older IPOD's Fine but when I try to transfer to the NANO it automatically disconnects.
I am using:
ITUNES 7.0.2.16
IPOD ver 1.1.1
I have Tried Reset and Restore on the NANO and then I can transfer some Songs but then the problem rreturns. I am only trying to download about 18 songs and have even tried to do 1 at a time. Any Suggestions?
IPOD NANO (2nd gen) 8gb Windows XP Pro 2gbRamOk, so I reset it while connecting to the PC. There's such a hassle of using the "Safely Remove Hardware" to 'stop' the iPod. I downloaded the latest iPod updater and reformatted the nano. Apparently there was an update sometime early last month. So I had to reformat, but it still automatically disconnected somewhere around song # 300, and this iPod had nothing else on it. I uploaded songs 50-100 at a time, and it seems to be ok since. Whew!
It seems there's a lot of trial and error on having to restart the computer, reformat the iPod, etc. I also find it helpful to go into SAFE MODE on your Windows XP PC and go into Windows/Temp and delete all these little files that pile up from somewhere. I've never been able to delete them as a logged-in user, so SAFE MODE is the only way to do it. -
Peer disconnecting immediately after EJB lookup - timing issue?
I'm getting a timing problem with the Oracle EJB server, version
8.1.6.
I've deployed an EJB successfully, so I want to write the client-
side Java code to use it. The code calls the lookup() method on
the InitialContext, and gets back an EJBHome object like this:
Object ejb = new Object();
Hashtable env = new Hashtable();
env.put(Context.URL_PKG_PREFIXES, "oracle.aurora.jndi");
env.put(Context.SECURITY_PRINCIPAL, "username");
env.put(Context.SECURITY_CREDENTIALS, "password");
env.put(Context.SECURITY_AUTHENTICATION,
ServiceCtx.NON_SSL_LOGIN);
Context ic = new InitialContext(env);
ejb = (EJBHome)ic.lookup(serviceURL + objectName); // service
URL is the URL of the server, and objectName is the name of the
EJBRemote.
This works fine. The problem is that if I try to call create()
on the EJB home interface IMMEDIATELY after this block of code
finishes, it peer disconnects. If I wait for a second or two,
there's no problem.
// Bad code?! Have to wait 1-2 seconds before calling this
code, otherwise, we peer disconnect.
MyObjectEJBRemote myEJBremote = ejb.create();
The peer disconnect looks like the following:
org.omg.CORBA.COMM_FAILURE: java.io.IOException: Peer
disconnected socket minor code: 0 completed: No
at com.visigenic.vbroker.orb.TcpConnection.read
(TcpConnection.java, Compiled Code)
at
com.visigenic.vbroker.orb.GiopConnectionImpl.receive_message
(GiopConnectionImpl.java, Compiled Code)
at
com.visigenic.vbroker.orb.GiopConnectionImpl.receive_reply
(GiopConnectionImpl.java, Compiled Code)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke
(GiopStubDelegate.java, Compiled Code)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke
(GiopStubDelegate.java, Compiled Code)
at com.inprise.vbroker.CORBA.portable.ObjectImpl._invoke
(ObjectImpl.java, Compiled Code)
at MyObjectEJBRemote.myEJBmethod
(_st_MyObjectEJBRemote.java:1103)
at MyClient.callEJBMethod(MyClient.java, Compiled Code)
at javax.swing.AbstractButton.fireActionPerformed
(Unknown Source)
at
javax.swing.AbstractButton$ForwardActionEvents.actionPerformed
(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed
(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown
Source)
at
javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown
Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent
(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent
(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown
Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForComponent
(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForComponent
(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown
Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Do I have to put a delay in my code in between calling the lookup
() and calling the create()? Is there something simple that I'm
missing? All I know is that if I wait for a just a moment
before I call create(), then the code works fine.
- rjms
NOTE: Please note that my email address is now:
[email protected]. Thanks.I'm getting a timing problem with the Oracle EJB server, version
8.1.6.
I've deployed an EJB successfully, so I want to write the client-
side Java code to use it. The code calls the lookup() method on
the InitialContext, and gets back an EJBHome object like this:
Object ejb = new Object();
Hashtable env = new Hashtable();
env.put(Context.URL_PKG_PREFIXES, "oracle.aurora.jndi");
env.put(Context.SECURITY_PRINCIPAL, "username");
env.put(Context.SECURITY_CREDENTIALS, "password");
env.put(Context.SECURITY_AUTHENTICATION,
ServiceCtx.NON_SSL_LOGIN);
Context ic = new InitialContext(env);
ejb = (EJBHome)ic.lookup(serviceURL + objectName); // service
URL is the URL of the server, and objectName is the name of the
EJBRemote.
This works fine. The problem is that if I try to call create()
on the EJB home interface IMMEDIATELY after this block of code
finishes, it peer disconnects. If I wait for a second or two,
there's no problem.
// Bad code?! Have to wait 1-2 seconds before calling this
code, otherwise, we peer disconnect.
MyObjectEJBRemote myEJBremote = ejb.create();
The peer disconnect looks like the following:
org.omg.CORBA.COMM_FAILURE: java.io.IOException: Peer
disconnected socket minor code: 0 completed: No
at com.visigenic.vbroker.orb.TcpConnection.read
(TcpConnection.java, Compiled Code)
at
com.visigenic.vbroker.orb.GiopConnectionImpl.receive_message
(GiopConnectionImpl.java, Compiled Code)
at
com.visigenic.vbroker.orb.GiopConnectionImpl.receive_reply
(GiopConnectionImpl.java, Compiled Code)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke
(GiopStubDelegate.java, Compiled Code)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke
(GiopStubDelegate.java, Compiled Code)
at com.inprise.vbroker.CORBA.portable.ObjectImpl._invoke
(ObjectImpl.java, Compiled Code)
at MyObjectEJBRemote.myEJBmethod
(_st_MyObjectEJBRemote.java:1103)
at MyClient.callEJBMethod(MyClient.java, Compiled Code)
at javax.swing.AbstractButton.fireActionPerformed
(Unknown Source)
at
javax.swing.AbstractButton$ForwardActionEvents.actionPerformed
(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed
(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown
Source)
at
javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown
Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent
(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent
(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown
Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForComponent
(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForComponent
(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown
Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Do I have to put a delay in my code in between calling the lookup
() and calling the create()? Is there something simple that I'm
missing? All I know is that if I wait for a just a moment
before I call create(), then the code works fine.
- rjms
NOTE: Please note that my email address is now:
[email protected]. Thanks. -
RV120W WAN interface doesn't automatically re-enable after WAN connection is restored
I found that RV120W WAN interface doesn't automatically re-enable after a cable pull and re-plug. I have to go into the Status->System Summary and click the "Enable" button. Is this normal on this router? Can I prevent that from happening? I would hope this is NOT normal as this would mean that I would have to be on-site and login to the web interface to re-enable it after a power failure or WAN link loss.
Tekliu,
Thanks for the response. But, as I mentioned in my prior post, this is, unfortunately, the designed behavior for this device, at least with a static IP and no ISP login. Cisco Small Business Customer Support was clear on this and didn't even open a ticket. I asked that they submit a feature request to change this behavior in a future release. Of course, they couldn't make any promises.
One possible source of confusion is the different circumstances that can occur. In my testing, the interface does come back up automatically on a soft reboot. It also comes back up automatically if both the RV120W and the upstream (WAN) device are power cycled together. I believe this is because the upstream device comes up much faster and is up before the RV120W. The case we are talking about is when the upstream device is cycled or the cable is pulled while the RV120W stays up. In this case, the WAN port remains disabled until you manually select the button on the status page.
Thanks again for following up on this. -
TS1369 Why i cannot see Ipod icon into my laptop after i connected to my laptop with usb cable
Why i cannot see ipod icon into my laptop after iconnected to my laptop
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.
Otherwise:
iOS: Device not recognized in iTunes for Windows -
Does the Weblogic Admin server need to be running after initial Connection?
Initially, I require a login to the Weblogic Admin Server.via my code
I am using JMX to monitor weblogic and all works great..I am trying to close the Admin Server and code blows up. Do I need the Admin Server running all the time?
Do you know of a way to connect initially to the Admin to get all Nodes, thendisconnect from Admin and monitor Nodes only? Thank you.I notice you didn't get a response when you asked this two weeks ago, either. You'd probably get a better response if you asked this on a WebLogic forum.
-
Theres no ipod icon on the side AFTER i connected the ipod!
help me!i connected it already!!!!
Windows XPHi roblesb,
Thanks for visiting Apple Support Communities.
I'm sorry to hear that you did not receive the information you needed at the store.
It sounds like you are trying to sync your iPod using a computer. If so, this article shows how to locate the iPod icon in all iTunes versions:
Locate and view your connected iPhone, iPad or iPod touch in iTunes
If you need to download the latest version of iTunes for your computer, you can find it here:
Apple - iTunes - Download iTunes Now
All the best,
Jeremy -
Iphone4S Automatic start immediately after shutdown
help !!
Can you be more specific as to your problem? Are you Resetting your phone? Turning it off via Sleep button?
Maybe you are looking for
-
I just purchase a brand new mac computer and I need to purchase new adobe CS software for work. Do you know if Adobe CS5 Design Premium-Mac is compatible with new mac computers with the updated Yosemite software? *No previous adobe CS software versio
-
Can I use two default route in a router
Hi I have a router which have two isp line. I want connected two differnt remote site by two isp line. now i have one default and another static. i can use two default route like this ? 0.0.0.0 0.0.0.0 201.222.103.x 0 0.0.0.0 0.0.0.0 201.221.102.y 1
-
Using ANT to create config.xml template
Does anyone have an example on how to use ant to create a config.xml template?
-
Upgraded to 3.6.24 last nite, now I can't close any yahoo mail I open
When I click on the X to close a single yahoo mail on the tab at the top of the mail, the mail will not close. I accepted and upgrade last night. Is it firefox, or a problem with Yahoo?
-
Health probe - not running and trying to see why?
Hi, Im trying to fix our exchange server 2013 (patched upto and including CU8) when I run the following command get-healthreport -server servername | where {$_.alertvalue -ne "healthy"} | ft -auto Server State HealthSet AlertValue Las