IPod is corrupt: will not restore, constantly resets itself

I have had my iPod 60GB for 2 years now and it just started going crazy recently. First it started skipping songs (not playing them) then when I connected it to my computer it said my iPod was corrupt and needed restored. So I clicked on restore and it keeps giving me an error message (1429) and says it cannot restore the iPod because it is corrupt. I've tried everything on the error message help page and nothing works. I tried changing the USB it was plugged into, and that didn't work. It says Windows couldn't install the software for my new drive. Now my iPod is setting here constantly restarting itself, over and over and over the Apple logo screen is coming on for a few seconds, then shutting off and back on and so on.
One of my friends said he had one that did the same and he had to send it in and get a new one- I certainly hope I will NOT have to purchase another one, because I certainly feel that for $280 you should get something that should work or can be easily fixed. If this is the case, and I don't get a new one, I will certainly NEVER purchase an Apple product again for sure.
I really like my iPod so I hope there's a way to fix it. I cannot get it to shut off now though! It keeps turning itself on and off. I am using a PC with Windows XP Serv. Pack 3 if that helps.
Any help is greatly appreciated! Thanks!!
Message was edited by: showjumper926

Virtually same problem. ipod shows playing a song, but I can hear the hard drive clicking. I tried to restore, but says ipod is corrupt. This is unreal as it is not long out of warranty and i paid way too much for this to happen. I have only used it about three months off anf on since I purchased it. It is stuck and will not shut off just the hard drive is turning. I placed it on a magnet in my car, and was wondering if that caused the problem.
Any help would be great as mor than one individual has this same issue.

Similar Messages

  • My ipod touch 4g will not restore, there's no problems with my pc as i recently set up an ipad the following day using the same procedure

    Hi, can someone please help? My sons new ipod touch 4g is not responding to any attempts at restore, and is not recognized in itunes or my computer. My laptop is working ok as it originally set up the ipod but when i connected it again it told me there was an update available, that's when it all went pear shaped. Just two days later we purchased an ipad which we had no problem with syncing on the same laptop using the same usb port. I can't even charge the ipod as the screen does not change from the 'connect to itunes' symbols. I've also tried charging it on a docking station, to no avail. I've done everything that's been suggested in the forums so if anyone knows anything, please let me know!

    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Above is from:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • HT201263 ipod white screen will not restore

    Tonight got white screen on my ipod, looked on apple website - tried to reboot and then tried to restore still white screen any other ideas please

    Try the steps in the article that I linked above.
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com)  on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.
    Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again.
    An easy way to find out if this is caused by the security software is to just uninstall it. If it works, just update the iPhone then reinstall the security software and try to set it up in a way that doesn't cause a problem.

  • Ipod frozen. Will not restore or turn off

    I dropped my ipod early this morning and there's a dent on the back and it stays at the song I was listening to when it dropped.
    It won't come off screen and I have tried everything to get it restored.
    My media tech teacher told me to go ahead and send it to Apple but I want to check with everyone here first before I send my money to Apple.
    Is there anyhing else that I can do and has someone else experienced this?
    Gracie
    mini   Windows XP   tiny 2 Mil. Dent

    Ok Ok. Here let me explain it more in detail because I have to sleep now.
    The Ipod is on the USB Port. It still has the song on it. No "Do Not Disconnect" or Sad Ipod or whatever.
    It still has the song on the screen, the time when it stopped. Its frozen. I tried to restart it and restore it but there is no luck.
    I also found my click wheel is movable now. Everytime I push it up really hard, it gets stuck and I can't push anything until I push it back down. Could that have something to do with it?

  • Help! my ipod has frozen & will not respond to reset

    I cannot get my ipod to repond to anything, I have just installed the latest version of itunes plus quicktime & when I connected to my PC the do not disconnect appeared on the screen but windows & itunes does not see the ipod, I tried resetting it in the troubleshoot & nothing works, it is stuck with the do not disconnect sighn on the screen, I cannot turn it off.

    I am having the same problem with both my 60g and my sisters 20 classic iPods. Both iPods are showing the frowning iPod with the following: www.apple.com/support/ipod. I have tried to reset, I have tried to get the iPod to go to disk mode, this worked once on both, but then they both go back to the stupid sad iPod! This is frustrating, because I can't get either of the iPods to be recognized in the iTunes either. Nothing wrong with iTunes, because the video nano appears in the iTunes! Help!! Someone, please help us fix this!!!

  • Ipod touch will not restore it get half way then freezes

    ipod apps were unreponsive so i restored ipod now it will not restore how long should it take it has been restoring for 5 hours is half way and looks as if it has frozen ?

    have a look @ this support article.

  • Ipod "corrupted" and will not restore following logging on to itunes

    Please please help!! I have recently bought 2 ipod classic's (120GB). I have previously had MP3 players and all of my music has been in either wma or mp3 format on the computer (through windows media). i have managed to convert all 500+ albums over to itunes but my ipod is now apparently corrupted "code 1439". I have tried everything on the apple website and it will not restore to factory settings. Th ipod itself is saying 0KB free even though there is nothing on it. I tried to download music from itunes and it got to three albums and then crashed. This is my second ipod, having sent the previous one back to the retailer. If anybody can help then it will be greatly appreciated. Computer runs on windows XP pro, Norton 360 installed, and all of my music is still in Windows media as well.
    Cheers
    Russ

    Try this:
    3194-How do I reset the hosts file back to the default?

  • HT1339 my ipod shuffle(1st generation) is corrupted (error 1442) it will not restore.             is it possible to correct this or is it beyond repair. It worked the last time I used it on my laptop with Windows Vista. Vista.

    My ipod shuffle (1st generation) will not restore. It says it is corrupted(error 1442) Is it possible to correct this problem, or is it beyond repair. It worked last  time I used it on my laptop with Windows Vista. Any help would be much appreciated.

    Im actually tilting it up where it cinnects to my iPod, not where it connects to my computer, and i have tried three(yes, 3) different cables, one of which i bought brand new. still nothing, and i've also tried different USB ports on my computer,....nothing. Could this simply be a hardware failure of somekind? maybe a physical problem...i mean, why would i have to tilt the cable in order for my computer to actually read my iPod? im looking at the USB connector on my iPod (maybe it's my imagination, not sure) it possible might be bent, the little metal part in the port.

  • My ipod classic will dowload any music from itunes it says corrupt, and it will not restore the device

    My ipod classic will not dowload any music from itunes it says corrupt, and it will not restore the device

    What happens when you try to restore the device to factory settings?  Any error messages?  If so, what is the exact wording of the error message(s)?
    B-rock

  • 160G iPod classic Will NOT restore

    160G iPod classic Will NOT restore
    Timeline:
    1. iPod freezes
    2. restart
    3. everything gone from device_ creating appearance of factory settings having been restored.
    4. plug into computer.
    5. computer says it cannot recognize iPod because formatless
    6. computer says initialize iPod
    7. I initialize iPod
    8. iTunes says iPod corrupt and to try disconnecting & reconnecting from computer. iTunes also says that if that doesn't work, to restore the iPod.
    9. disconnect, reconnect, FAIL.
    10. restored iPod. Followed all computer prompts for admin codes &c.
    11. computer says iPod is restored & rebooting_ iPod screen begins to alternate between the screen that says "Connected: Eject before disconnecting" with the connection plug icon for about a minute_ and the "Syncronizing: Do not disconnect" screen with the spinning dual arrow icon for about 10 seconds.
    12. Leave iPod alone for an hour.
    13. come back to surmise that iPod is stalled somewhere in the finishing of the restore process.
    14. Try repairing/restoring iPod through disc utility.
    15. Same shenanigans that followed the restore through iTunes.
    16. Try restore through iTunes Again.
    17. Shenanigans begin again & go on for several minutes until iTunes magically goes to the screen that asks you if you want to automatically sync all muisc &c. I tell it no.
    18. begin to try loading things I want into the iPod.
    19. Everything freezes again after 2 songs.
    20. Force quit iTunes when it won't respond.
    21. try to reboot iTunes & can't.
    22. Eject iPod
    23. iPod ejects, but restarts itself & asks me to choose a language . . . I dread that I am back to square one.
    24. Miraculously, with iPod disconnected, iTunes boots up again.
    25. Heave a great sigh, reconnect iPod to see what happens & continue accumulating frustration like a windowsill accumulates dead bugs.
    26. iTunes issues ultimatum: "iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod. "
    27. Scream in my head. Mash face into keyboard. Type timeline item 26 and so on . . . Mentally prepare to start over.

    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes and click “Restore”

  • My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    Likely this:
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • TS1372 My ipod classic will not restore

    I got the white screen of death so i looked for solutions, i managed to get the ipod working again but itunes said the device was corrupted and also needed formatting, i again looked for advice on how to do this and was successful, but itunes says it the ipod needed restoring, i tried but it will not restore and i get the error code 1436, i have followed apples help and advice but to no avail, i have updated and reinstalled itunes but still same problem, i am stumped as what to try next, can anyone help please

    Sorted the problem, I have an old laptop with windows XP on it, i installed itunes on it and connected the ipod.
    Itunes recognised it repaired the fault and synced it so i don't know why my desktop would not do it.
    i'm happy now.

  • My IPOD touch will not restore.  It says "IPOD device cannot be found".

    My IPOD Touch will not restore.  It says, "IPOD device cannot be found".

    - Try resetting the iPod;
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next try placing the iPod in recovery mode and then retore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - Then try placing the iPod in DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • TS1702 I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    If iTunes sees the iPod, try a manual install, as pointed out on link below.
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HT1339 I restored my 80 g iPod now it will not sync to my mac where I always synced. How do I fix this problem?

    I restored my 80 g iPod now it will not sync to my mac where I always synced. How do I fix this problem?

    Hello paiglang,
    Thanks for using Apple Support Communities.
    If your administrator password is not being recognized, then you can reset it by following the steps in the article linked to below.
    Reset the user password in OS X Lion, Mountain ... | Apple Support Communities
    Have a great weekend,
    Alex H.

Maybe you are looking for

  • Pdf's Links to be retained in .eps

    Hi All, I have a new requirement from client, stating that a PDF will contain all the links. We need to save the PDF pages to .eps in Acrobat Professional. After creating the .eps we need to check that all the links are working in the .eps, to check

  • Disastrous Calendar Issue with IOS 5 upgrade

    I upgraded both my and my wife's iPhone 4's to IOS 5 last night. I did mine first, chose iCloud, and then disabled iCloud when I was told I was over the 5GB limit. I don't have mobileme or anything like that; always backed up to my Windows Vista 4 ma

  • TS4455 Why IMovie no longer shows all movie clips from movies from Kodak camera

    I am on an IMac 10.6.8   2.16 ghz intel core 2 duo with 3 gb memory I am using IMovie 11  (9.0.4) My camera is a Kodak Playsport shooting hd video On all of over 300 videos I have shot previously IMovie worked perfectly. On the last 3 movies imported

  • Help on JRadioButton event

    While i was searching for a code sample for getting the selected radio button, I have found following method I have following method that returns selected radio button of a group.     public static JRadioButton getSelection(ButtonGroup group) {      

  • Hand tool Scroll all   I'm missing something

    When I choose the hand tool and in options Scroll ALL. I'm supposed to click and drag to see the other open files (photos). What am I overlooking? PSCS2 Wxp