IPod is disabled. Says to connect to itunes however itunes won't recognize the device. What do I do?
IPod Touch is disabled. Its says to connect to itunes however itunes won't recognize the device. What do I do?
Place the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Similar Messages
-
got a itouch on ebay and it says ipod is disabled and i connect to my computer itunes it tells me itunes could not connect to the ipod because it is LOCKED with a passcode you must enter passcode on ipod before it can be used with itunes. I asked people I
iOS: Unable to update or restore
-
Ipod stuck in recovery, and iTunes won't recognize the device.
My ipod is stuck on restore/ recovery mode, and iTunes won't recognize the device. The computer makes the beep noise saying that somethin is plugged in but itunes won't pick it up. It is iTunes 11.1.1 and i have a 5th generation Ipod touch. Any Help? Thanks (:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just updated an iPhone 4 from iOS 7 to iOS 7.1 and my computer/iTunes no longer recognizes the device; what gives? How do I get iTunes to show the device?
With iOS 7, the "call Decline" button is only available when the phone is awake. To decline a call when the phone is asleep, simply tap the On/Off button.
-
Apple store reset my Ipod to factory setting, now can get Itunes to recognize the device. The I Pod won't turn on past the first screen with the pic of the apple on it.
Try the following:
- A reset and then connect to your computer and try to restore.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- See if placing the iPod in Recovery Mode will allow a restore.
- The see if DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If you can't turn the iPod full off, let the battery fully drain. After charging for at least a hour try the above again
- If still not successful time for an appointment at the Genius Bar of an Apple store. -
My iphone 4 is stuck on the screen with the itunes symbol and usb. When I plug it into my computer it says that it cannot recognize the device and theres a malfunction. I've tried unplugging the port ffrom my phone, going into dfu mode and plugging it bavk in. the apple logo comes on for a minute but then goes right back to the itunes/usb screen. I'm at a lose for what do do..every forumn says dfu mode, but its not working. Any other suggestions? Thanks!
Chris477 wrote:
My iphone 4 is stuck on the screen with the itunes symbol and usb. ... I'm at a lose for what do .... Any other suggestions?
Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
TS4006 ipod is disabled says to connect to itunes
ipod is disabled it says to connect to itunes. how do i do this. i have not used tis for 5 months and lost my password
Tionna12 wrote:
... i have not used tis for 5 months and lost my password
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
Can't open iTunes 'cause it won't recognize the library
Hi,
Today I got a new Macbook Pro; I restored my information from a Time Machine disk, just as I did before a year ago when I got my iMac. In that ocasion everything went right. But today when I try to open iTunes it says that the iTunes library.itl cannot be read because it was created with a more recent version of iTunes, and asks me if I want to download the new version. I agree to download it but then it says my software is up to date. What would be wrong? How can I get to my music again? (almost 100GB of music!)Here is a direct link for iTunes 10.6.3. http://support.apple.com/kb/DL1426
Download it and install over your current installation. No need to delete anything. -
Please help! I've tried everything to get this dang thing to display a downloaded movie from itunes on my epson EX5210 lcd projector via a HDMI cable plugged into a minidisplay port adapter. I am no expert and have no idea what to do!
It's all in the manual... starting on page 26...
USB seems to work as well. Tried that?
By the way, this dang thing has "only" 768 physical pixels vertically, so "1080p" won't be visible anyway, and scaling will take place. Hope you won't be diappointed. All specs including resolutions here. -
TS3540 iTunes and iPhoto won't recognize my iPhone when plugged into my mac.
iTunes and iPhoto won't recognize my iPhone 4S, or my wife's iPhone 4 when pluged into my MAC. I am running OSX v10.5.8, and both iPhones have the latest version of iOS. I tried a few of the other trouble shooting tips from the community, but nothing seems to work.
Any suggestions? Thanks.
-CoachJB54I tried that and iTunes and iPhoto still won't recognize the device. Any other suggestions?
Thanks.
-CoachJB54 -
I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.
iOS: Unable to update or restore
-
I found my old ipod touch and it says the ipod is disabled and to connect it to itunes but when i try to connect it to itunes it says cannot connect cause ipod has passcode but i cant unlock passcode cause ipod disabled. Please anyone have an idea?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
How do i unlock my ipod when it says to connect with itunes
how do i unlock my ipod when it says to connect with itunes
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software -
HT1459 what do when you are locked out of you ipod and it says to connect to itunes
hi i what do i do when you get locked out of your ipod and it says to connect to itunes but you have no clue what to do an itune?
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Performance problem with table COSS...
Hi Anyone encountered performance problem with these table : COSS, COSB, COEP Best Regards
-
Com.sapportals.wcm.WcmException:multi-server search failed
Hi Friends, I am getting the below error when i use search option in portal. Search Failure Error during search occurred - com.sapportals.wcm.WcmException: multi-server search failed on some of the servers;error=1999,index=zhsea_helpdesk_doc,location
-
Installing cooltools when Sun studio is installed in a non default dir
Hello all, I have installed sun studio 12 on one node of a SPARC cluster. When installing, I did not use the default directory (/opt/SUNWspro), but I used a different one as this installation is for trial purposes only. Now, I want to install discove
-
Encore DVD 2.0 Menüs in Encore CS3
Hallo ihr Lieben, ich habe gerade eine mittelmäßige Herausforderung mit dem neuen Encore CS3. Nach Öffnen meines aktuellen, mit En 2.0 erstellten, Projektes musste ich feststellen, dass alle automatisch erstellten Textunterbilder in den Menüs verscho
-
So I'm struggling with a 1603 when I try to install 7.1.1 and posted earlier about that problem. Here's maybe another clue: I found an old iTunes install CD that I got with an iPod mid-2006. When I try to install from the disk I get a String PRODUCT_