Ipod is locked up. says it is corrupt with error code 1437

my ipod is lockedup.. when I connect it to the computer it takes for ever to identify my Ipod then tells me it is corrupt with a 1437 error code Please help

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen                          
If recovery mode does not work try DFU mode.                         
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
If you don't have access to a computer
If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up      
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store         

Similar Messages

  • Pavillion p6754y locks up and factory repair fails with error code

    My Pavillion p6754y started locking up.  After attempts to clean had drive I ran factroy repair.  Recovery Manager failed with an error code of 0xe0ef000e.   How do I find what this error code means and/or is there any indication of how system can be repaired.

    Hello JohnG2.
    You need to test your hard drive.  Are you still able to boot into Windows?  If so, follow these steps.
    Have a lovely day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • My ipod says that there is an error code (-1) and every time i try to update i get the same error code over and over again help?

    my ipod wont update because it gives me a (-1) error code and i really need to update it and suggestions? ive read the troubleshoot page on it and it said something about uninstalling the security software and i have no idea how to do that.....

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • 2nd generation ipod with error code

    When I try to sync my ipod and itunes, I come up with error code -48. Won't sync. Everything was already updated, I've tried virtually everything with the exception of restore. Would like for that to be last option. Can anyone help me out???

    Try on another computer
    Then see:
    -1 error
    -1 error too
    If still problem means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • " could not extract the archive since it is corrupted. Error code = 50"

    HI,
    I am trying to install "Oracle WebLogic Server 11gR1 (10.3.4) + Coherence -
    Package Installer 10.3.3" on my system,but when i double on the GUI self extractor for WLS,,, i am getting the following error.
    " could not extract the archive since it is corrupted. Error code = 50".
    so i tried to download another copy at another location,,,,even then the same error continues.
    please help me with this.
    thank you,
    raghuram.k

    请暂停杀毒软件就可以安装了。
    PLS stop your antivirus software,then you can fix it.

  • I have a ipod 1st gen, its frozen and wont back up. comes up with error code 1 can someone please help.

    I have a ipod 1st gen. its frozen and wont back up. comes up with error code 1. can someone please help.

    Hi billewen690,
    The resource below may help troubleshoot the issue you are having with your iPod touch being unresponsive.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support. 
    Last Modified: Jan 14, 2015
    Hope that helps ...
    - Judy

  • TS3694 I am trying to restore an Ipod Touch 1st generation and I am receiving an error code of 1, How can I resolve?

    I am trying to restore an Ipod Touch 1st generation and I am receiving an error code of 1, How can I resolve?

    i have the same problem ipod touch 1st gen and its 1 not -1
    can you help please??

  • Could not extract the archive since it is corrupted. Error code=3

    Dear ALL,
    After downloading Jdeveloper 11g, and while I am installing it
    The following error arises
    "could not extract the archive since it is corrupted. Error code=3".
    how to solve this problem
    Thanks in advance

    Hello All,
    The problem was solved, I just re downloaded the file, and re install it again.

  • TS1372 what does ipod can not be restored error code 1437

    what does ipod can not be restored error code 1437. How can I restore my ipod?

    I'm not sure but this may help:
    iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439

  • I'm getting error code 1437 when syncing new ipod with my computer

    I've just got my new ipod and when I try to sync it to my computer to copy music I get error code 1437.   I'm not very tch savvy so anyone out there please explain in English and not tech speak.

    I have a temporary workaround here:
    1. Press PrintScreen (PrScrn) to capture a screenshot.
    2. From Start, enter MSPAINT in the Search box, and then click "OK".
    3. Use Ctrl + V to paste the screen shot to the paint.
    4. From the File menu, click Print to print it.
    For the Home group instructions, you may refer to the following link:
    http://windows.microsoft.com/en-us/windows7/products/features/homegroup
    MCSE, MCSA, MCDST
    [If this post helps to resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.]

  • My iPod is locked and says connect to iTunes when I try to connect it a message says you have to type in the passcode to connect

    My sister's iPod is locked up and we need it unlocked now!

    You need to place the iPod in recovery mode and then connect the iPod to its syncing computer and restore from backup.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • TS1372 Can not sync music in itunes to ipod touch classic get messages saying can not locate file. error message 1437 when attempting to restore to factory settings.

    When I attempt to sync my ipod classic in itunes some songs will sync then it freezes and get a message "canot sync file missing or cant find file"  WHen I s
    try to restore my ipod to factory setting i get error message 1437.  I using windows 7

    The 1437 error can be an early sign of hard disk damage and/or failure.  Try a doing a quick diagnostic on the drive's health status using the instructions posted by another forum member turingtest2 in this older post. He also describes what the numbers mean and how to interpret them.
    https://discussions.apple.com/thread/3110831?start=0&tstart=0
    B-rock

  • I can't get my ipod classic (120GB) to work. I am getting error code 1434, and the ipod is making a lot of clicking noises when plugged in

    After coming back from Hawaii, my Ipod classic doesn't work anymore. When plugged into itunes, it says that it may be corrupt, and that I need to restore it. I have tried this, but everytime it gives me an error code of 1434. When I click more information, it sends me to a support page, but not for error code 1434. I tried all of the steps on the page hoping that it would help. Also my ipod is making  a lot of clicking noises when it is trying to run, alomst as if it is skipping inside and can't fully run. Can anyone help me ?

    Clicking sounds from an iPod that has a hard drive for storage is not a good thing.  It usually means the hard drive is faulty.  That is the likely reason for getting an error during the attempt to Restore.
    If you use a Mac, you can try putting the iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    If it goes into Disk Mode, connect the iPod and instead of running iTunes, run Disk Utility.  Does the iPod appear in the Disk Utility sidebar?  If it does, select the iPod device in the sidebar, not the volume indented below the device (if there is one).  Go to the Erase tab.  Set the Format to Mac OS Extended (Journaled).  Name does not matter.  Click on Security Options and choose to write a single pass of zeros over the entire disk.  This serves as a good "stress test" for the iPod's hard drive.  Back on the main window, click Erase.
    This takes longer than a regular erase, but you should see steady progress.  If it errors out, or stalls for a LONG time (like hours), the hard drive is likely to be faulty.
    If it completes successfully, quit Disk Utility, run iTunes and try to do another Restore

  • I am trying to update my iPod Touch 4G and it is giving me an error code (-43)

    I am trying to update my iPod and it gives me this error code -43 and says their was an error with backing up my iPod if I wishto continue with the update it would lose everything that is on my iPod. Is their anything I can do? I Do NOT want to lose everything on my iPod!

    Try this previous discussion:
    What's error (-43) and how do I fix it?

  • I can register an OCX file in Windows 7 x64 without incident but with Windows 7 x32 I get a p-up that says "DllRegisterServer failed with error code: 0x80004005. What gives???

    Hey yeah.  not much else to say.  The title says it all.
    I'm trying to register an OCX file that my video editing application requires to work properly.
    I'm using a  Registry (Regsvr32 and Regsvr64) tool to Register DLL/OCX files.  Both bit Registry tools work fine. I can Register any DLL or OCX file with Windows 7 x64 and everything goes smoothly.
    But, when in Windows 7 x32, again, no problem with merging the Regsvr32 tool, but when I go to register the OCX file message says it was loaded but the DllRegisterServer failed with error: 0x80004005.
    Why does everything work in Windows 7 RC 7100 x64 but not in Windows 7 RC 7100 x32???GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

    I don't know what happened. 
    My Video Editing software was working fine a few days ago in Windows 7 x64.  Tried using it this morning....couldn't load the .mpg video clip.  Just stood there looking stupid like it does in the 32-bit version of Windows 7.
    I was hoping the x64 version of Windows 7 RC 7100 was going to make a decent run against my XP Pro SP3 setup. When I was able to register the required .ocx file for the video editing application, I thought "cool".  I made a TV recording then used the Video Editor to edit it and it worked fine.  Earlier this morinng I made another TV recording, went to go edit it and the video editing application couldn't load the .mpg file at all.  This problem just annihilated any chance of me ever purchasing Windows 7, 32 or 64-bit.GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

Maybe you are looking for

  • How to track meta information throughout a site

    I was wondering if there is an easy way to track meta information (keywords, descrption) and possibly page titles throughout a site and have it exported to something like an excel spreadsheet.  I'm trying to track meta and title information over time

  • Caption in h:dataTable not displayed properly.

    Hi, Iam having a problem with adding caption to h:dataTable. My table displays fine with out caption. When i add a caption the headers seem to be scrolled towards right. Eg: Product Displayed (This is caption) .......... Name number bola 1234 my data

  • Powershell - dealing with {host1, host2, host3, ....}

    Hello, I'm working on a Clustered Windows 2012 R2 server, and I'd like to get the list the Preferred Owner list of some cluster Resources, but we have many nodes and the output is not readable from powershell because when use the standard command but

  • Problem with updating ABC indicator for Material

    Hi All, My client wants to run cycle count for one warehouse.Since the material master does not have ABC indicator in Storage view, Iam using MIBC for updating the Material Master. But after executing MIBC also ABC indicator is not getting updated in

  • ECM Records Created with $0.00

    We are setting up Enterprise Compensation Management in ECC 5.0 with MSS.  During the Compensation Planning phase in MSS, where you create adjustments for employees (i.e. merit increases, bonuses, etc.), any employees who are eligible but not granted