IPOD is out of whack :(

I turned on my IPOD last nite and all it shows is Accessorize Test
Please plug FW
LCD ID : 1
FWPWR : )
I cant turn it off or anything. Anyone knows what is wrong???
Thanks
Chris

Have you tried resetting it?
How to reset the iPod.
It may take quite a few attempts and is best done connected to power.
If this doesn't work, try restoring the iPod to factory settings.

Similar Messages

  • How do i fix my ipod if the computer says itunes cannot connecet to the ipod with out entering your password?but i turn on my ipod and it says disabled connect to itunes?

    how do i fix my ipod if the computer says itunes cannot connecet to the ipod with out entering your password?but i turn on my ipod and it says disabled connect to itunes?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • Is it possible to transfer music between iPhones and iPods with out using iTunes

    Is it possible to transfer music between iPhones and iPods with out using iTunes

    Nope.  Both require iTunes on a computer to sync music from.
    Unless the iPod is an iPod Touch and the music was bought from iTunes.  In which case the Touch can simply go to the iTunes App, under Purchased  and download the purchased songs for free.

  • My old computer had itunes and downloaded songs that I put on my ipod. My old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out and will not activate. How can I get access to my old songs on new computer.

    My old computer had itunes and downloaded songs that I put on my ipod. Well, my old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out years ago and will not activate. I now have a new computer and iPod and I have an iTunes account on my iPhone5. How can I get access to my old songs on new computer? Are they lost for good? I have no info about my old computer and old account.

    Downloading past purchases from the App Store ... - Support - Apple

  • HT201269 my pc crashed and i no longer have the music i used to have, how can i sync my ipod  w/ out loosing  all of my  music.  and also how do i update  my ipod only has  a partial version of ios4

    My pc crashed and i no longer have the music i used to have, how can i sync my ipod  w/ out loosing  all of my  music.  and also how do i update  my ipod only has  a partial version of ios4

    It has always been very basic to always maintain a backup copy of your computer for this very occasion.  USe your backup copy to put everything on the new computer, then sync.

  • My ipod 4th gen gets wiped clean of music anytime I sync. it then only redownloads some of the music in the library and wont upload missing songs.  They show on the ipod grayed out. How do I get this to stop? re-uploading takes 4 hours.

    my ipod 4th gen gets wiped clean of music anytime I sync. it then only redownloads some of the music in the library and wont upload missing songs.  They show on the ipod grayed out. How do I get this to stop? re-uploading takes 4 hours and is never completed.  I only get some of the 6000+ songs I have. This started when I updated to IOS5 i think.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • LG Monitor and New Mac Pro -- Colours out of Whack

    I have an LG L226WT and a 20" Apple Cinema Display connected to a brand new Mac Pro.
    Both monitors (in the same configuration) were running on my old PowerMac G5 before.
    The Cinema Display works fine, colours are good, so is light etc.
    The LG first had ghosting (severe at that) and this morning the colours are totally out of whack. Looking at some photos I had taken a week ago and colour corrected on the G5 now look like a child painted them (on the LG monitor, on the Cinemadisplay they are fine).
    It's not the graphics card either. If I take a screenshot on the LG and look at it on the Cinemadisplay the colours etc. are correct, but the LG is right now pretty useless to me. I tried to calibrate it but the end result is pretty much the same, it just does not seem to want to play nice.
    I don't think it is the DVI cable, as it is securely screwed in and in the same location as on the PowerMac, turning the monitor off / on seems to resolve the shadow problem but not the colour issue.
    Anybody have experienced this? Any tips outside of trashing the LG and buying a new screen?

    The ghosting issue is still one when I first turn the computer on. I found that I have to turn the monitor off and on and it resolves the issue.
    I also found the source of my colour problem, it comes down to the LG "resetting" itself to some "automatic improvement" or whatever you want to call it, which completely messed with the tones. After I turned that "feature" off it worked well, but man, that took me three days to figure out.

  • Video Levels out of whack

    Can anyone clue me in as to why my levels look fine in the FCP waveform but not on my external waveform? They are way out of whack; whites at 120 IRE and blacks at -5 IRE, when they are in limits on the FCP waveform. Idiot check has been checked - the external WF is setup on the FCP bars to the proper calibration.
    One clue in this mystery is my baseline black level (the sync pulse I guess - the lines that should stay at -40 and 0) jump up and down from shot to shot.
    I'm working with SDI in and out for tape. The WF is using the Composite out and has a Sigma reference signal going to it.
    I thought I had the answer to this already but have since discovered this oddness of the baseline jumping all over and I don't want to go lifting the black levels when the baseline seems to be the root of the problem.
    Any help from you engineer type people out there is appreciated.

    First, open the Io Control Panel and select the radio button in the Analog Output tab to add setup (+7.5). What does that do for your black levels on the external scope?
    I suspect what you're seeing is the difference between digital and analog levels.
    Report back and we'll go from there.

  • Aspect ratio out of whack...

    Hello,
    I find occasionally when I import a movie into Logic 9 the aspect ratio goes out of whack. The same clip opens fine in Quicktime. I can uncheck 'Keep Aspect Ratio' in the video settings and rough the ratio into something that looks normal again but I have to do the same thing everytime I open the project. Is there a way to work around that?
    Thanks,
    Duane

    I have a similar problem with clips shot in "cinema" mode in a JVC camcorder. I have been able to edit them in the older iMovie HD version, but not in iMovie 09. If Apple doesn't address this problem, I'm not going to have much use for the 09 version, which is too bad because it has desirable features.
    If anyone has found a work-around, please let us know.

  • HT1605 How do I get my ipod nano out of deep discharge?

    How do I get my ipod nano out of deep discharge?  I have stored it for over a year and it won't work without being plugged in

    Hi pjlmserl,
    Thanks for visiting Apple Support Communities.
    I'd suggest resetting your iPod nano, and if the issue persists, restoring it:
    How to reset iPod
    http://support.apple.com/kb/HT1320
    Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    Regards,
    Jeremy

  • How to get an ipod touch out of recovery mode.

    I want to get my iPod Touch out of recover mode and i don't know how I got into it.
    All that happened was that my iPod Touch ran out of battery, so I plugged it into my MacBook and when it turned on I just got the Connect to iTunes screen.
    I tried turning it off and then on again but to no effect.
    I also tried holding down the Home and Power button until the apple logo shows up then release but that still did not work.
    What should I do to get it out of recovery mode without restoring??

    If re-starting the AMDS driver doesn't work, you can try removing iTunes and AMDS, then re-installing iTunes (which will re-install AMDS).
    If that doesn't work, try putting the Touch into DFU mode. You kind of mentioned it above where you held the buttons down while connected to iTunes, but it didn't sound exactly correct and it can be a little tricky to get the timing down.
    While having the Touch connected to the computer (and iTunes running) hold the Sleep and Home buttons until the Touch screen goes black (about 10 seconds). When that happens release only the Sleep button -- keep holding the Home button until iTunes says it found a device in recovery mode. At that point you release the Home button and will have to Restore the device, and you can try re-loading your last backup after the Restore process completes.

  • Can I still download iPod software updates? iPod is out of warranty.

    Can I still download iPod software updates? iPod is out of warranty.

    Can I still download iPod software updates?
    Yes, assuming they're compatible with that iPod model. iOS 4 can't be used on the original iPod touch.
    iPod is out of warranty.
    This only affects how long Apple will freely provide technical support, repairs to, or replacement of the device.
    (55217)

  • TS4006 If my ipod is out of battery will it still play the sound?

    If my ipod is out of battery will it still play the sound?

    No.  It has to be turned and connected to wifi.

  • Colors in Pages out of whack?

    After I installed OSX 10.6.7 and its combo update, Pages is TOTALLY out of whack -- black text comes out white, colors come out all wrong, when I highlight text it comes out some odd purple lilac-like color.. And there seems to be no way to change this! Any suggestions on how to fix this?

    Hold down CONTROL OPTION CMD and click 8.   This is a toggle for black on white or white on black.
    Regards,
    Captfred

  • Timeline issues - when i drag media back, the timeline becomes very large and out of whack!  What is this CS4

    timeline issues - when i drag media back, the timeline becomes very large and out of whack!  What is this in CS4?

    You are in the wrong forum!
    Premiere Pro CS4 & Earlier

Maybe you are looking for

  • How do I update status on a discussion?

    Sorry, probably a stupid question but looked everywhere - I received 3 emails telling me to update my status and can't find it anywhere - can you please let me know how / where to change so I won't get the emails and why am I getting 3 emails? Thanks

  • ITunes library isn't updating when iTunes Match is on.

    I am using iTunes 10.7 on OSX Mountain Lion when I import a CD or song file or purchase music on my iPad or iPhone, it is not visible in the iTunes library until I turn off iTunes Match.  Any thoughts?  It is a pain to turn off iTunes Match just to s

  • Web object widget (cp7) and TOC

    I am using a web object widget to launch MP4 videos (hosted on a progressive streaming server) within my captivate course. I am wondering if there is a way to accurately track the duration (in the TOC) for these videos. The duration displayed on the

  • Switch?

    I currently own a dell laptop & desktop PC. They're getting outdated so i'm looking for a new desktop I've been looking at the iMacs and i would reallllly like to get one (looking at 17" with superdrive). but the last time i used an apple was probabl

  • How to bundle a queue?

    I've used bundle before on regular data types etc Can't seem to work out how to bundle a few queues into one? Mainly for aesthetics on the block diagram, so I can pass the bundle into my SubVIs and unbundle and use as necessary? Tried connecting queu