IPod keeps blinking and does not start up!

Hi,
I braught an iPod of model number A1236 a year back. And did not use it for past 6 months.
Yesterday, I tried connecting it and it was working fine. Unfortunately, I just pulled off the USB cable without a safe remove of USB from windows or an eject from iTunes.
From that time, whenever I connect my iPod to my windows XP pro machine, the screen keeps blinking with the apple logo. Niether its recognized as USB device by windows nor iTunes recognizes it.
I tried, the troubleshooting steps provided in apple iPod technical site, none of them helped and I am also not able to put the iPod to disk mode.
I am not sure whats to be done next and I am afraid if I spoiled my iPod. Please suggest what to do next..
Thanks,
Jade

Hi Biglou44,
If you are having issues with an iPad that isn't responding or won't start up past the Apple screen, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

Similar Messages

  • FCP 7 short clip via share export keeps blinking and does not react. Thank you for your support!

    Try to export renederd short clip in FCP 7 via Share, but export knob keeps blinking and does not react. Please help,
    thank you very much!

    I did notice the "sequence" indicated 32 bit and all the clips, wav music, etc. are 16 bit.  Is that normal?
    May be but I would.
    • Convert all material to formats that FinalCut has easy to use and that match the Final product (Movie)
    • especially the Audio file .wma, wav etc and 32-bit - is no good start
    - convert them to .aiff 16-bit 44.1kHz or 48kHz
    • Set up a NEW Project - BUT FIRST select - right kind of project depending on material - AND FINAL MOVIE PROPERTIES.
    THEN FIRST - Start a NEW PROJECT - Else it will not work.
    Yours Bengt W

  • LED near scroll and num locks keep blinking. Does not start often. Computer guy says moth board gone

    HP pavilion DV4
    Purchased from Singapore

    Hi,
    Try a Hard Reset as follows.
    Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for a full minute.  Re-insert the battery, plug in the AC Adapter and see if the notebook will start.
    If this has not helped the issue, can you match the sequence of 'blinks' to those shown in the table below?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Last night my ipod touch(with iOS 5 beta 4) tried to reboot itself and is just not starting. it does not allow me to do anything and does not start till it's battery is exhausted. iTunes is not recognizing it. pls hlp............!!!!!!!!!!

    Last night my ipod touch(with iOS 5 beta 4) tried to reboot itself and is just not starting. it does not allow me to do anything and does not start till it's battery is exhausted. iTunes is not recognizing it. pls hlp............!!!!!!!!!!

    Please post in the developer forum using your account credentials.
    Stedman

  • My ipad screens apple picture keeps blinking and will not open

    my ipad screens apple picture keeps blinking and will not open. I have tried pressing both top and bottom button together, pressing just the top, etc. and nothing...it just keeps blinking the apple?

    Hello llp03,
    Thanks for the question, that definitely sounds frustrating. The following troubleshooting assistant provides steps that may lead to a resolution:
    Apple - Support - iPad - iPad Troubleshooting Assistant
    http://www.apple.com/support/ipad/assistant/ipad/
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
    - Connect the device to your computer and open iTunes.
    - If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    - If the device doesn't appear in iTunes, try to force the device into recovery mode.
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks,
    Matt M.

  • I have reset the all information in my iphone but the phone hangup on the apple icon and does not start

    I have reset all the information in my iphone 3GS but the phone hangup on the apple icon and does not start an I reset the phone with ON/OFF buttom and the home buttom but still the problem exist

    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore from Backup..  Restore as New...
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Creative Cloud Photoshop won't intall. Even after following support instructions the wheel keeps spinning and does not install. HELP

    Even after following support instructions the wheel keeps spinning and does not install. HELP

    Hi help-please,
    Please try downloading and installing Photoshop CC from the direct download links available at: http://prodesigntools.com/adobe-cc-2014-direct-download-links.html
    Make sure you follow the important steps mentioned on the page before initiating the download.
    Use your Adobe ID to license the software
    If the install fails then you can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html
    Regards,
    Rave

  • My ipad2 shuts down completely after I press the sleep button and does not start.... Help please

    My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
    This started since the latest update!!!!!!!!!!!!!!

    Hi Alkaf,
    Welcome to Apple Support Communities.
    It sounds like your iPad will not turn on. Take a look at the iPhone article linked below, it provides tips that will help resolve power issues for both iPhones and iPads.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    -Jason

  • When i click on the application it blinks and does not opens

    when i click on the application it blinks and does not opens

    Try downloading any small- sized free app and then try again.

  • Screen changing colours and does not start

    hi, when i turn on my macbook, the screen changes colours and does not start. Please someone knows how to solve this problem?

    you need to take it in for diagnosis, that is beyond the scope of this forum.

  • My ipod nano 6th generation does not start on pressing the sleep/pause button  or pressing both sound low and sleep pause button.it starts while connected to power it is fully charges

    i have an ipod nano 6th generation .version 1.2 yesterday i  restored it on i tunes  using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok  after starting by connecting to power and then disconnecting the cord.
    what would be the reason and what to do?>

    Call Apple Care as you are still under warranty.  

  • My macbook pro 2.33 17 inch takes 9 minutes to start and does not start with lion

    my macbook pro 2.33 17 inch takes 9 minutes to start on Snow Leopard  and does not go beyond the apple log start up with lion.
    When I am using Snow Leopard after it has finished the starting process; everything works well..it is just the 9.10 minutes it takes to
    boot that I don't understand + I want to upgrade to lion, but it get stock in the apple logo and the little while just keeps on spinning eternally.
    I feel I am in purgatory...:-)
    Please help ...any suggestion will be appreciated;
    Thanks.

    See if this is of any assistance:
    http://support.apple.com/kb/TS2570
    Ciao.

  • Phone shutting off when not using and does not start back up by itself

    I bought the LG Revolution phone 2 1/2 weeks ago and since then twice when I have not been using it, it shuts off by itself and does not power back up until I realize it is off and then I hold down the power key to restart it. It also turns off in the middle of using an app but then restarts itself. Is this a known glitch or is something wrong with this particular phone? Since I am after the 2 week mark, can I exchange it? Or am I out $200 for an issue that isn't my fault?

    tiggerpolo81, I know your phone shutting off and on is very frustrating. I will attempt to assist you with some suggestions to resolve this issue. I researched this issue and found that some customers have reported this as an issue and we have also reported it to our device team. We will attempt to address the issue with any future updates for this phone. In the mean time, I recommend checking to see if a third party app is causing the issue. 
    Safe Mode temporarily disables all applications that have been installed via the Android Market. Performing this step is necessary to determine whether a 3rd party application is the cause of an Operating System / Application issue. 
    Enable Safe Mode
    With the device powered down, press and hold the power button (upper-right corner).
    When the LG Logo screen appears, press and hold the volume down key.
    Release the volume down key when Safe mode is displayed at the lower-left.
    This may take up to 30 seconds.
    Disable Safe Mode
    Press and hold the Power button (upper-right corner).
    Select Restart.
    Additionally , if the issue continues we can review your account and device for warranty replacement options. If the phone is within its one-year manufacturers warranty and have no physical or water damage, it can be replaced with the same model. 

  • My mac computer was frozen,then it had a question mark ? and does not start, still at the grey screen blinking with the mac logo,dont know if it is a lion,leopard or tiger

    my mac computer was frozen, so my son turned off the computer and restarted again, then a questin mark showed on blank grey screen, then the mac logo comes up blinking and nothing happens. Don't know if it is still in the frozen stage. Please help me, don't know what to do?The version not too sure but i know it is more than 10.5 and 6. I turned off the computer many times and left it off for a while and turned it back on and it remains at the white screen with the mac logo blinking.

    http://support.apple.com/kb/TS1440
    http://apple.stackexchange.com/questions/8517/cant-boot-mac-only-shows-a-folder- with-a-question-mark
    http://support.apple.com/kb/TS2570
    https://discussions.apple.com/thread/3926554?start=0&tstart=0
    How old is this Mac? It is also possible that the hard drive has failed. If nothing works, take it to the  Retail Store

  • Downloaded an App that keeps crashing and does not work

    Hi,
    I purchase a Sudoko app for my ipod touch and it doesn't work. I try to open it and it keeps crashing. I deleted it and re-installed it and it still does not work. I e-mailed the developer Bradley J Danitz 10 days ago with no response from him nor any help. I  am not happy with this App or Mr Danitz for his lack of support.
    Sincerely,
    Gary Olson

    Official policy is all sales are final.
    You can always ask, though.
    http://apple.com/support/itunes/contact/

Maybe you are looking for

  • Speed on WINDOWS NT

    I have installed JDEVELOPER 3.1 on windows NT 4.0 running on pentium-II 500 Mhz. I feel jdeveloper to be extremely sluggish in performance. Is this the property of the software or there is some way to increase the speed of the software?

  • Obsolete

    Hi all, Whenever i starting the instance as sysdba, I have this warning everytime on login Is there anyway to remove this warning from next login. In alert log file there is no entery cause at that time i delete the contents of this file. ORA-32004:

  • IDOC Partner Profile for Sales Orders

    What kind of Partner Profile should i create to receive Sales Orders by IDOC from external non-SAP system by RFC?

  • Simple Program - Day Number

    Hi, I am trying to pick up java...and need help with a program I want to be able to figure out the number of days into a year from a date -- for example - user input - year - 2001 month - 01 day 01 the output would be 1... and for dec. 31, 366 (depen

  • How to Configure VapIntegertoNumberConverter in EJB Mapping in RAD for WebSphere

    Hi, Please help. Thank You.