Ipod keeps restoring
Itunes keeps telling me to restore my ipod which i have done 3 times now. I have also changed the letter in disk management as well. But it just keeps telling me to restore ipod. I ended up buying new ipod and it just says connected - can't even register that one. Any ideas most welcome
Guys,
I had downloaded the latest version of I tunes on 6th of this month. The new version was installed and then the Ipod was restarted by windows. After restarting the itunes did not detect my Ipod. Then I restored my Ipod, ever since then it never started again. I just see the apple logo, then it gets reset and I see the apple logo again. I gave for servicing and I was told that my Ipod is beyond repair and they say that there is some hardware problem.
I don't know what to do. In case you get some solution then please let me know.
Similar Messages
-
My ipod keeps restoring and wont show up.
Everytime i plug in my iPod a message keeps coming up telling me to restore it well i restore it and the message keeps coming up i tried going into the control panal and all that stuff but my ipod doesnt even show up in there or in my computer folder. please help.
Is that a "recovery mode" message, littlehippie?
If so, and the iPod otherwise seems to be working fine, it's probably worth checking on a Windows drive letter confusion, as per the following document:
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear -
Ipod keeps restoring itself 5 or 6 times a day
hi after switching from pc to a macbook pro i formated my ipod to mac. it worked fine for about one day, now it keeps saying it might be corrupted and it needs to restore to factory settings so i do this and it reboots and does the same again for up to 6 times in a row then finally it will recognize it and sync the music, till the next time it is connected and starts the how thing again. please can anyone help
See:
*[/questions/815130]
*[https://bugzilla.mozilla.org/show_bug.cgi?id=653830 Bug 653830] - Popup notice Software Update - Update Failed - Something is trying to trick Firefox into accepting an insecure -
My ipod keeps restoring and wont sync
It says it has 0kb but its a 160gb ipod ugh
Hi 5amwow,
If you are having issues with your iPod classic, you may find the following Troubleshooting Assistant helpful:
Apple Support: iPod classic Troubleshooting Assistant
https://www.apple.com/support/ipod/five_rs/classic/
Regards,
- Brenden -
Help me i put my ipod to restore its completed and it keeps going to the same thing.
so i want to restored my ipod "Are you sure you want to restore the iPod “iPod” to its factory settings? All of your media and other data will be erased, and the newest version of the iPod software will be installed" I say okay . them its says preparing ipod for restore it loads then it says" Your iPod has been restored to factory settings, and is restarting. Please leave your iPod connected. It will appear in the iTunes window after it restarts." but its keeps doing the same thing over and over im using the adminstrator acount im using a mac and my mac book is updated so is itunes but it says to leave it connected id but the the same thing start from the same. i just wanna restore it delete everything go to ios6 and have everything back to normal im no where near an aplle store so. itss a cycle keeps starting all over please help what should do!!!!!!!
ybe this:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. . -
Why does every 3 mths my ipod keeps on asking for a restore when i did nothing to it
why does every 3 mths my ipod keeps on asking for a restore when i did nothing to it?
Either a bad memory/storage location that manifests its infrequently or a intermittent hardware problem like a loose connection.
-
My ipod keeps telling me to restore it
My iPod keeps telling me to restore it from the computer. When I restore it from the computer it will turn off, and go through the restore process then the same white screen pops up saying "Please restore iPod from computer" I'll get on the computer it says it dectects a ipod in recovery mode. I have restored it 5 times and the same thing keeps popping up. does anyone know whats wrong?
Try this (and ignore the troll).
Click on control panel/admin tools/computer management/disk management/right click on the iPod to re-assign the drive letter.
Choose something lower down the alphabet, say 'M' or something similar.
The iPod can be confused by any other storage devices assigned a similar drive letter even though they may not connected at the same time. -
I need help why does my ipod keep saying connect to itunes,I have already restored it 7 times what to do now.HELP ME!
If the restores were successful, that is completed all steps without errors then:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. . -
HT201263 I have done restore and ipod keeps going back to disabled mode. What do I do next?
I have done restore and ipod keeps going back to disabled mode. What do I do next?
Do a manual install as specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
After you download the firmware file as specified in the article, place the iPod in recovery mode and then do the restore/update using the instructions in the article -
my ipod keeps asking me to restore and when i do restore it just restarts and asks me to connect to itunes and starts again.please help its my sons bday and this is his present
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My ipod keeps turning on and off after recently trying to restore
Hi guys i was just wondering if anybody could help me my ipod keeps turning on and off after a recently trying to update.. I really need to know how to stop it.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Ipod wont restore it just keeps saying to restore again
i changed the password on my ipod touch 5 and i forgot it almost immediatley! It said connect to itunes after so many password attempts so i tried that! i had never actually synced before so it required a password to connect and obviously that didnt happen because the ipod was disabled...
i tried the advice on this site and set my ipod to restore mode, and itunes began to restore it, but every time it finished, the itunes store told me that it needed to be restored again! So it just kept going in this loop although nothing was actually happening! What should i do? Please i need an answer asapDid you already try this?
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
copied from iTunes: Specific update-and-restore error messages and advanced troubleshooting -
Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The wifi on my iPod keeps going off. I go to settings, turn wifi back on and click on my home hub in choose a network zilch!!! message pops up 'Unable to join the network'!! Can anybody please suggest a solution. I am not really a tech type but if given clear instruction I may be able to solve this menace. Thanks
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?
i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated
Maybe you are looking for
-
We have a corporate website, we officially support FF3, FF4, IE8 and IE9. Our web site is quite big, so we really need browser caching, first time page load is around 15 seconds. With files in the cache getting new page is less than a second. Everyth
-
Variable conversion in BEx Web 3.5 after EHP1 Update
Hello experts, we have a problem after updating to ehp1 with a 3.5 web query. When we enter in the variable screen for the characteristic variable of fiscal year "0032010" then the bi clears that field. Without ehp1 the system replaces "00332010" wit
-
I can't load a webpage from the cd. please help me
hello Firefox team, i am having a Photoshop tutorial as a html page in a cd. when i try to load that cd i can't view the tutorial video.
-
Hi, I just installed the new photoshop update and now I can not select objects with the path select tool. I have to use the move tool to select the object then select it with the path tool and once I have the path selects and try to move an anchor po
-
Windows migration assistant gives error " An error occurred while preparing your information for transfer " Please suggest how to proceed . Many Thanks .