IPod keeps showing "do not disconnect"

when i connect my iPod to the computer, it shows "do not disconnect"
but after im done updating my iPod, it suppose to show "ok to disconnect", but all it does is flashing the stop sign and telling me "do not disconnect".
it only stops when i disconnect it from the computer...
.help needed......thanks

''does it mean that i can't use my ipod as a hard disk if i uncheck "enable disk use" ?''
Yes. You must have the box checked to use iPod as a hard disk, and always unmount/eject iPod before unplugging it.
'' don't like to update my ipod because the process restores everything in my ipod''
If you choose to restore the iPod, all data is lost, but just by updating the iPod, all of your data stays on the iPod.
Make sure you have the latest iPod Updater
*nathan

Similar Messages

  • Keeps showing Do Not Disconnect never goes away

    I have a older ipod not sure what it is actully called it is slim and black and 4GB it is not working when I plug it into the computer it just keeps showing Do Not Disconnect and it never goes away.

    Hi Trudy...I had same prob before and you need to download apple's itunes software to be able to access or listen to your ipod...ok good luck! 

  • My Ipod keeps saying "Do not disconnect" and the update ipod is not working

    Hi,
    I just got my ipod nano a couple of days ago and after loading the itunes and then plugging in the ipod i unplugged it when it said do not disconnect without thinking. Now when i plug in my nano it keeps saying do not disconnect and although the ipod symbol appears on the itunes, no instructions have popped up to explain how the music transfers even though it says it in the booklet and when i click file the update ipod button isn't clickable. I'm just wondering if there's anything i could do

    Welcome to the discussions.
    Are you syncing manually?
    Manually Managing
    Music
    and have you seen this?
    Disconnecting the
    iPod from the Computer
    JC
    Thank you very much, i read the link on the manual and my preference was set to manually manage songs and after reading it i was able to put a couple of songs on to the ipod which is a lot better than where i was about an hour ago lol
    Thank you

  • IPod only shows "Do not disconnect"

    Suddenly when I disconnected my "always" in gook working order iPod, it only shows "Do not disconnect", neither the iMac nor the iTunes recognize it.
    I've tried the Menu and Center buttons and nothing at all.
    Can someone help me please?
    Thank you in advance,

    Maybe this can be a clue: I put on a note but my iPod didn't recognize it, just before I unplugged it.
    Thanks again

  • Ipod continuiously shows "Do Not Disconnect"

    My ipod video continuously shows the "Do Not Disconnect" icon for long periods of time, and doesn't change.
    I don't know how to tell if the ipod shows up in the My Computer folder, but I know it's not connected to the computer, because when I tried to restore it with the ipod Updater, I got a message saying "Cant mount Ipod" or something like that.
    Is there a way to fix my Ipod without sending it in to be fixed? I dont know what else to do.

    Is there a way to fix my Ipod without sending it in
    to be fixed? I dont know what else to do.
    I had horrible frustration getting my ipod firmware updated and filled from itunes. I sent back one ipod to service and the new one they sent me had even more problems working with my computer. I don't think sending it back is the solution for most of us.
    The amount of information here in support can be overwhelming...especially for someone new to Windows computers. Who wants to mess with their MsConfig?
    I did keep reading and working to fix mine.
    The solution for me was just to disconnect from the Internet and turn off all my virus scanning, firewall and privacy software.
    After I did that, I clicked on the ipod updater and it asked me to plug in the ipod. I first got a disk error message and tried it one more time... then it went to finish and I was able to open itunes and download all the music, etc to my ipod.
    If you get disk error, try again. Don't give up!
    Don't forget to restart all your virus/scam protection software and reconnect to the internet. I suspect I'll have to go through this process for every update and itunes connection with my computer.

  • My ipod keeps blinking "do not disconnect"

    when i plugged my ipod in this morning it said the usual do not disconnect... but then it didnt register onto itunes so i unplugged it and the message stayed up and is still there... its been blinking for five minutes now and its unplugged... please help me

    Hi smpneedshelp,
    Have you tried resetting your iPod? To reset an iPod with a clickwheel:
    First, toggle your iPod's "Hold" switch back and forth a couple of times. (be sure to leave it on the white side of the switch, which is the Off position)
    Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
    You might need to try this several times. For more effect, connect your iPod to a power source (a wall charger would be preferrable) while you're resetting it.
    Also, you might want to check out the rest of these five iPod troubleshooting steps, here
    The Five Rs
    Any success after trying that?
    -Kylene

  • The Ipod Keeps Posting Do Not Disconnect

    Hey,
    I posted a problem, but no help. Now the I did the 5R's and now the Ipod Screen just reads; Do Not Disconnect for about 45 minutes, and is getting warm from the back (where the serial is located?) Is that good??? PLEASE HELP!!! I have been up for hours!!!!!!!!!!!!! I have a PC and I am using Windows XP.

    Hello, I just had that same problem. I searched around in the previous posts and I found a solution.
    In Itunes, go to your Ipod preferences.Make sure that your 'enable disk use' is not clicked...hopefully that will help =S because i did for me.
    TTFN

  • Used IPod Updater - IPod keeps saying Do Not Disconnect

    I had to restore my IPod because of an issue with it. Now when I plug the IPod into my computer it says I need to use the IPod Updater to update my software. I did this last nite at 6 PM and it still says Do Not Disconnect. It has been almost 12 hrs. Help! I would like to use it on my business trip coming up.

    Updating the iPod software shouldn’t take any longer than a few minutes.
    First of all, try clicking on the little x in the top corner, which might take you to the next stage in the process. Sometimes it gets stuck.
    If this doesn’t work, shut down the computer, disconnect the iPod, restart the computer, run the updater again, and connect the iPod when prompted.

  • Ipod keeps saying Do not disconnect..

    Ok.
    I bought my ipod 5gen yesterday. I installed things from the CD. When I connected my ipod to the comp the iTunes won't open automatically. So I opened it, but it wont recognize my ipod. I went my computer and then there wuz a removable disk called IPOD.. I did everything i could from the FAQs except re installing the Windowz.. mine's windowz XP service pak 2. I read posts in the bottom and there wuz solution.. going to Manage and renaming things.. but it won't work either. wut should i do..
    Sony   Windows XP   nothing

    Welcome to Apple Discussions!
    See this...
    Windows Recognizes iPod But iTunes Does Not
    Make sure you have read that one. I think you were referring to a different link.
    btabz

  • Ipod classic not connecting (not even showing 'do not disconnect' on Ipod)

    Help! I have an ipod classic and, since I upgraded to itunes 9, I have noticed that, all of a sudden, my ipod won't connect at all.
    When I connect the USB cable to the ipod, the screen lights up but does not start charging nor does it show 'do not disconnect', and the ipod is obviously not recognised by Itunes. I have tested the same USB port on my printer with no problems, so it doesn't seem to be the port. I have also tried downgrading to itunes 8 with no problems. I have tested the cable and ipod on another computer and it worked fine. I am basically all out of ideas as to how to fix it.
    When I restart the computer with the ipod plugged in, the ipod briefly starts charging and shows 'do not disconnect' before disappearing after a few seconds. It is a total mystery to me.
    Does anyone have any ideas whatsoever? I am getting desperate!!!

    I have the same problem as you describe it. My iPod Classic 160GB freezes up when I plug the apple usb cable into the iPod. I am using Windows 7 64bit, and iTunes v9.0.2.25 64bit for Windows Vista & Windows 7. Firmware 2.0.3 PC. And I do not have this problem with my iPod Classic 80GB.
    This is the workaround to the problem: Reset your iPod. You need to hold down the center button and MENU button TOGETHER, and wait for the iPod to start resetting. Then release the buttons. When the Reset completes, it should start synchronizing normally.

  • TS1373 my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I

    my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I do?  it also makes a lot of noise while connected to the computer.

    Is the camera damaged? Could be a hardware problem.
    Try:
    Close the Camera app in the multitasking bar, then try again.
    Restart/Reset/Restore your iPod. In that order.

  • My iPod keeps showing the apple logo + a blank screen and the lock screen keeps freezing when trying to unlock it.

    Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
    I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
    I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Nano keeps saying "do not disconnect"

    I have up loaded songs and my itunes recognizes my nano just fine but everytime I plug it in it just keeps saying "do not disconnect" and it never goes away. Even after it syncs and the battery is completely charged. I don't know if maybe I'm doing something wrong or even hurting my ipod.
    Please help.

    Have a look in "My Computer" and see if it is listing your iPod in there. Alternatively try using the "Safely Remove Hardware" function on Windows. That should disconnect the iPod and allow you to unplug it.
    To find iPod options, in iTunes click on "EDIT" then "PREFERENCES" then "iPod" then "Music" You should have a list of options:-
    Automatically update all songs and playlists
    Automatically update selected playlists only
    Manually manage songs and playlists
    If the third option is checked then it will not disconnect automatically.
    Lower down the page are more options
    Only update checked songs
    Open iTunes when this iPod is connected
    Enable disk use
    Display album artwork on your iPod
    If "Enable disk use" is checked, then again it will not disconnect automatically.
    To manually disconnect, right click on your iPod's name and then left click on eject.
    If that lot doesn't work, then that is the limit of my expertise.

  • My ipod keeps showing the apple logo on and off after i updated it?

    my ipod keeps showing the apple logo on and off after i updated it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • My ipod keeps showing the apple symbol then shuts off.

    my ipod keeps showing the apple symbol then shuts off.

    Please tell me that it has NEVER been jailbroke.  If it has never been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

Maybe you are looking for

  • Nano - Volume and Settings Issue

    My Nano's volume will go up and down for no reason.It happens when the Nano is locked so it isn't going up and down because I am hitting it. Also, right now the Nano seems to be set so that the song title, artist and some additional info is read befo

  • How to test FM

    Hi, I have to test the function module FRE_ORD_IN_CREATE_DOC.please let me know how to test.It has two tables how to test them. Thanks, satish.

  • Reg Pc Modeling

    Hi Friends. I am creating process chain like below Start Load PSA with Rout Run DTP to MtPlant Load PSA without Rout Run DTP to MtPlant Here its not allowing me to add another dtp to the 2nd IP.. saying predecessor is already there something like tha

  • No Photo Album

    Greetings Mac World, I used macs over 10 years ago and came back this summer. I love the new iPhoto '08 organizational features. My cousin was building a photo album in iPhoto for over five hours (there were a lot of photos). I went to edit a few thi

  • Cannot scroll or resize

    Hello I installed Java Java Plug-in 1.5.0_05 Using JRE version 1.5.0_05 and when the applet window loads it is a frame with no scrollbars and cannot be resized,I reinstalled two times but it remains the same so if I am viewing an applet window or pla