Ipod mini 1st Gen not seen by iMac or iTunes

Hi,
I've looked through the other threats and reviewed and checked the advise given such as check the USB port; Done - iPhone & iPad work fine with th same port and cable. the iPod mini just flashes 'Do not disconnect' its fully charged and plays my music fine through a number of devices.
I cannot get the iPod mini to be seen by the iMac on 10.7.2 or on iTunes 10. I dont have access to a firewire cable and reluctanted to buy one on the chance that may not work either.
First question is the iPod mini on version 1.4.1 able to link with iMac and iTunes 10 and if so how? Thanks
Stephen

I'm having the exact same problem, have tried everything listed on this page and the device manager steps. Nothing extra comes up when I click on "show hidden devices" the exact same listings are still there. And there is nothing indicating an ipod mini in the USB section in device manager or "unknown device" or anything.
The other user said "thank you yes have tried this and message is as follows: windows cannot start this device because its configuration information (in registry) is incomplete or damaged (code19)" - but nothing like that is coming up on mine. None of the R's make anything different. Am I doing something wrong? Can anyone give me a hand?
Ipod Mini   Windows XP  

Similar Messages

  • IPod mini 1st gen 4gb

    I have an iPod mini 1st gen 4gb. When I click the wheel to advance to the next song nothing happens. The wheel works fine otherwise. I have reset and restored the iPod several times. What am I not doing?

    Robert,
    Besides the scrolling feature built into the click-wheel, there is a microswitch button for each function.  In other words, Menu, Forwards, Backwards, Play/Pause and Center Button each have their own switch that’s activated when you press that part of the wheel. 
    It’s possible that the switch for the Forward function has failed.  Does that button work in ANY menu area.  Do the other buttons work?  If you’re in the middle of an album, can you go backwards in the list of songs?
    I was just working on the click-wheel on one of my Mini a couple of days ago.  I bought a used one and the prev other had some kind of decal over the scroll and the adhesive virtually glued the center button to the rest of the wheel. 
    Hopefully, it’s just the Mini’s click-wheels are they’re available on eBay for about $10 and can be user-replaced, if you’re VERY careful. 
    I also have an old 1st gen Mini that could be a parts donor and could do this for you.  I could also replace the harddrive with a 32gb Compact Flash card and new battery  while the Mini is opened, if your interested.  I’ve done a BUNCH of those and they work great.  I'm even selling one of them on eBay now.
    BWhite62

  • HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

    After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPod Touch 1st Gen Not Charging/Being Reconized

    As the title says, my iPod Touch (1st Gen) will be reconized bu any computer or charge all in itself. I tried plugging it into multiple computers, nothing. I tried plugging it into the wall adapter...still nothing. It doesnt not get the charging symbol when I plug it into either places. The is actually the second time it happend. The first, well my cord was so worn, I guessed it was the cord and replaced it, worked just fine. The replacement happend very recently, like maybe 1-2 months ago. So right now, I would guess it was the cord, but its brand new. I have tried toing both a soft and hard reset of the iPod, nothing worked. If anyone could please help me, it would be highly appreciated.

    - See if placing  the iPod in Recovery mode will allow a restore
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Then make an appointment at the Genius Bar of an Apple store.

  • Ipod nano 1st gen (not recognized by iTunes and won't resotre)

    My ipod nano 1st gen has been working fine up untilthis afternoon..I plugged it in as normal while running iTunes and I wanted to remove some music files t add new ones and all of a sudden it wasn't recognized by itUnes anymore, you can't resotre it on iTunes or manually and whenever I plugge it in the itunes shut down..
    It was working fine before that, I was able to add and remove songs on it..I also have Ipod Touch 5 that works fine no problems and UBS ports are ok as well (all other ubs devices work on them). I have the latest, newest version of Itunes instaled
    HELP
    Thank you

    Hey moni8181,
    If you are having an issue with your iPod nano not being recognized by your computer, I would suggest that you troubleshoot using the steps in this article - 
    iPod nano Troubleshooting
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • IPod Nano 1st Gen not connecting to my computer

    My friend's iPod Nano 1st Gen won't connect to my computer (i have previsily added songs to it since last month) and now my iTunes won't show that ipod on my devices lists (I did NOT update iTunes because of the problems other people were getting)..... it will charge on my computer but WON'T sync....... WHATS UP WITH THAT???
    THANKS IN ADVANCE TO THOSE THAT HELP.

    Could be any number of reasons.  One of them just may be your refusal to update iTunes.  Just because others are having issues does not mean you'll have them! 
    iPod appears in Windows but not in iTunes 

  • Ipod Nano 1st gen not working

    Hello all
    I have a Ipod nano 1st gen 2gb. I can restore it, reset it with menu select key, but everytime it starts it loads to the lanuage screen and i can not click to get further into the ipod, it use to work before i upgraded the firmware to the new 1.3.1. is there away to downgrade back to like 1.1.9. I am running vista 64 bit so i cant run the 32bit restore program to try that. If there is anythign anyone can think of that will be great. Yes i have reset it via the menu key and select key like 1000 times...

    I downgraded the nano from 1.3.1 to 1.1.1 then down to 1.0 and then back to 1.3.1 and still the same thing, no select function upon the Language Screen. Anyone have anything else i can try?

  • Ipod nano 1st gen not syncing

    My ipod nano 1st gen is not syncing properly. When I plug it in and itunes starts up, it begins the syncing process, but gets stuck midway through. I have it set to only sync checked songs and a specific playlist. Also, it still has enough memory. Cannot get it to sync and stays busy so long i cannot eject because computer is busy syncing! I've also tried to reset and restore, but it wouldn't restore because it was busy syncing!! Help please!

    I have the same problem. I have an Ipod Nano 1st generation that won't sync also. I tried downgrading Itunes version and that didn't work. I installed the latest Itunes and firmware but I'm still having the problem.
    The only solution I have found is to reset the ipod, then do a restore in itunes then run the sync. It works then once and you will need to do it again everytime you sync otherwise it won't sync. It is rather disapointing considering that the Ipod is supposed to be a premium product.

  • Ipod nano (1st gen) not charging/not showing up on computer or itunes

    I recieved a 2GB ipod nano (1st gen) as a gift back in December 2005. It's worked fine until recently. Yesterday, I tried to charge my ipod. However, when I connected my ipod to my power adapter to charge it nothing happened. The charging symbol didn't even show on the screen. So then I tried plugging it in to my laptop computer. Same result: nothing happened and worse still, it didn't even show up on My Computer or in iTunes. I then tried connecting it to our regular computer. Same result as the laptop and still no charging icon. I tried my 2nd generation nano thinking that maybe something was wrong with the USB cable or with the power adapter but it worked fine with everything. I also tried another cable. But still nothing worked. I've tried the 5 R's thing but it didn't work. I even tried leaving my ipod alone for awhile to no result. Finally I tried putting it into Disk Mode and that's where it is now. I've tried to run through the steps again with this but it didn't work. So now it's in Disk Mode and it needs to be charged but I don't know how to do it. I'm starting to think that I just need to get the battery replaced. Unless someone else has a fix that will work?? Please help!!

    It sounds like the port or cable is having a problem. First try a different cable.
    If the cable doesn't fix things then try resetting the PMU (Power Management Unit) then see if the iPod will show up.
    MJ

  • I have a iPod Touch 1st gen, not working.

    I have a iPod Touch 1st gen but it wont turn on or anything and wont do a thing.  How am I to go about this, is it best to take it to an apple shop?

    First try the troubleshooting here.  If unsuccessful than an appointment at the Genius Bar of an Apple store is in order.
    iPod touch: Hardware troubleshooting

  • New ipod nano 2nd gen. not loading onto windows or itunes

    I just got an ipod nano 2gb 2nd gen. (refurbished from apple). I updated my former version of itunes (my daughter has a 1st gen. nano, so she's been using itunes with her's with no problems..) to the latest version like the quick start guide says. Plugged in the ipod to the usb port on the back of the computer and the setup wizard pops up, asking to install the software for the device. I try letting it auto search, which it finds nothing, and I get a message saying "your new hardware may not work properly.....". I checked the device manager and the ipod is listed under "other devices" with a question mark by it. I checked to make sure my daughters 1st gen. nano works with the updated itunes and it does with no problems. Now what?
    Ipod Nano 2gb 2nd gen.   Windows XP  
    Dell Dimension 4600   Windows XP  

    I also have a 2nd generation, which I purchased after my ipod Shuffle stopped updating. We plugged it in, followed the instructions but the Nano was not recognised by my PC, however, my nano does get recognised on my husband's pc. My daughters ipod and my old shuffle both are still recognised on my pc. I need to delete the shuffle, as it is faulty, but more importantly, I need to get my pc to recognise the nano. Please help.

  • Please Advise: iPod mini 1st gen. questions and issues

    Hi all, thanks for your attention!
    I have, what I believe, is a 1st generation iPod mini - I purchased it in early/mid 2004. I love it, and don't want to just trade it in for one of the newer ones, that do 5 million more things than I really need. I just need my music and contacts, that's all. The problem is that it now only plays about 2 hours before tragically and dramatically dying of "insufficient battery power"!
    The battery life was never great - even when new - about 6 hours of play time. I heard, soon after I purchased it, that they had come out with a "second generation" one that had more than double the battery life. I think I read something about the disapointing battery life of the "first generation" being the reason for the re-release of the updated model.
    Anyway, later I heard (maybe MacWorld?) that the only difference between the two was the battery that was put in it, and that you could take a "second generation" iPod mini battery and swap it into a "first genaration", and voila: you have converted your 1st gen. into a second gen. and more than doubled your battery life.
    Is this true? If not, does anyone know what IS the difference bettween the two generations?
    I am thinking that the best thing to do is to go to the Apple Store and have them replace the battery with a new one, but which one do I tell them to put in? 1st gen., that has poor battery life, or can I get away with 2nd gen., and enjoy the extra longevity?
    Any info would be REALLY appreciated! Thanks in advance amigos!
    15" PowerBook G4   Mac OS X (10.4.9)   I love my G4 - Intel wishes they could be this good!

    Robert,
    Besides the scrolling feature built into the click-wheel, there is a microswitch button for each function.  In other words, Menu, Forwards, Backwards, Play/Pause and Center Button each have their own switch that’s activated when you press that part of the wheel. 
    It’s possible that the switch for the Forward function has failed.  Does that button work in ANY menu area.  Do the other buttons work?  If you’re in the middle of an album, can you go backwards in the list of songs?
    I was just working on the click-wheel on one of my Mini a couple of days ago.  I bought a used one and the prev other had some kind of decal over the scroll and the adhesive virtually glued the center button to the rest of the wheel. 
    Hopefully, it’s just the Mini’s click-wheels are they’re available on eBay for about $10 and can be user-replaced, if you’re VERY careful. 
    I also have an old 1st gen Mini that could be a parts donor and could do this for you.  I could also replace the harddrive with a 32gb Compact Flash card and new battery  while the Mini is opened, if your interested.  I’ve done a BUNCH of those and they work great.  I'm even selling one of them on eBay now.
    BWhite62

  • Compact flash ipod mini 1st gen

    I have a 1st gen ipod mini and bought a 32gb compact flash card to replace my broken 4gb hard drive. When I try to connect to itunes to re install the firmware on the compact flash card, itunes will not recognize. I get a little folder with ! mark next to it then when i connect it, it just says do not disconnect. Any help would be awesome thank you!

    Robert,
    Besides the scrolling feature built into the click-wheel, there is a microswitch button for each function.  In other words, Menu, Forwards, Backwards, Play/Pause and Center Button each have their own switch that’s activated when you press that part of the wheel. 
    It’s possible that the switch for the Forward function has failed.  Does that button work in ANY menu area.  Do the other buttons work?  If you’re in the middle of an album, can you go backwards in the list of songs?
    I was just working on the click-wheel on one of my Mini a couple of days ago.  I bought a used one and the prev other had some kind of decal over the scroll and the adhesive virtually glued the center button to the rest of the wheel. 
    Hopefully, it’s just the Mini’s click-wheels are they’re available on eBay for about $10 and can be user-replaced, if you’re VERY careful. 
    I also have an old 1st gen Mini that could be a parts donor and could do this for you.  I could also replace the harddrive with a 32gb Compact Flash card and new battery  while the Mini is opened, if your interested.  I’ve done a BUNCH of those and they work great.  I'm even selling one of them on eBay now.
    BWhite62

  • Ipod Touch 1st Gen not starting up past the apple logo

    When I start it up i see the apple logo for about 15sec then it turns off. I've tried putting it into safe mode by holding the Power and Home button for 30sec but all it does is turn on and off twice then nothing happens.
    Any ideas on how to fix this?

    Hi,
    Would you please share you solution as I'm facing the same with my 1st Gen iPod Touch.
    PS: iTunes does not detect the iPod either.
    Thanks.

  • IPod mini 1st Gen. Display problem

    Hello everybody!
    I've got a problem with my iPod mini display: In the last few weeks the display got brighter and brighter.. or should I say I lost the contrast? .. so now I can't see anything on the display. The iPod works very well but I have to use it blind And the problem ist not solved by using the contrast settings! But now I can't see the seetings anyway I think, the display is internally damaged or something like this..? Do you have any idea? Thank you very much for your help!
    Greetings from Hamburg, Germany
    Marco
    iMac G5 20   Mac OS X (10.4.5)  

    Did you try these?
    The Five Rs.
    If nothing helps, and you think it needs repair, you can arrange online service here.
    Service request.

Maybe you are looking for

  • Getting stuck in a subroutine

    Here is a script I am using to export recordings made with EyeTV. My problem is when the script is triggered from EyeTV when the recording is done it works just fine. If I run the script as a stand alone app on a selected recording it gets stuck at t

  • Windows 7 x64 on a white macbook late 2009

    ok, i'll ask this question again in a different way, hopefully get an answer this time: are the bootcamp 3.0 drivers machine specific? i know that install dvd's are supposedly machine specific, but i can't confirm. the reason i'm asking is that i'm h

  • Menu doesn't display in flash player

    In DW CS5 I used the Insert Media command to embed a swf video on dravisinterests.com/advancedcarbTestSWF.htm. How do I place a menu on the flash player? I inserted the menu parameter in the code below generated by DW but it still doesn't work. <obje

  • Region.addObserver Problem with PHP Files

    Hi, I try to load a Dynamic XML via PHP Files. everything works fine. but when i use a Region.addObserver the callback function dont trigger. It only happen with php Files. My code is quote: <script language="JavaScript" type="text/javascript" src="{

  • Display selection screen details in the header of ALV

    hi.. can someone please help me on how to display the data in the selection screen in the header in ALV? i hope someone can help me..thanks very much..