Ipod Mini not able to use full capacity?

I have been trying to transfer 3.5 GB onto my 4 GB mini. I get a message saying there is not enough space even though the Ipod says there is 3.75GB available? Any ideas to fix this

Hello,
I see that you're having an issue unblocking ports for the printer.
Here is a list of the ports that needs to be unblocked. Hopefully this will help.
Incoming ports (UDP) are destination ports on the computer while outgoing ports (TCP) are destination ports on the
HP device.
• Incoming (UDP) ports: 137, 138, 161, 427
• Outgoing (TCP) ports: 137, 139, 427, 9100,
9220, 9500
The ports are used for the following functions:
Printing
• UDP ports: 427, 137, 161
• TCP port: 9100
Photo card upload
• UDP ports: 137, 138, 427
• TCP port: 139
Scanning
• UDP port: 427
• TCP ports: 9220, 9500
HP device status
UDP port: 161
Faxing
• UDP port: 427
• TCP port: 9220
HP device installation
UDP port: 427"

Similar Messages

HP Officejet Pro 8600 Plus not able to use full features

HP Officejet Pro 8600 Plus (Model No. N911h)
Serial No.[Personal Information Removed]
Windows 7 Professional Service Pack 1
The printer is being used on the desktop as a network printer. Windows Firewall is turned off. Office uses Trend Micro Antivirus. Able to use full features like digital fax, print, scanning only when Trend Micro Office Scan is offloaded. Printer was taking dynamic port so created Standard/TCP-IP port created. Even this did not solve the problem. Trend Micro administrators say the port is open. Not sure if anything particularly needs to be allowed by Trend Micro. Spoke with HP support system over phone. They are also not sure what is to be done rectify the problem.

Hello,
I see that you're having an issue unblocking ports for the printer.
Here is a list of the ports that needs to be unblocked. Hopefully this will help.
Incoming ports (UDP) are destination ports on the computer while outgoing ports (TCP) are destination ports on the
HP device.
• Incoming (UDP) ports: 137, 138, 161, 427
• Outgoing (TCP) ports: 137, 139, 427, 9100,
9220, 9500
The ports are used for the following functions:
Printing
• UDP ports: 427, 137, 161
• TCP port: 9100
Photo card upload
• UDP ports: 137, 138, 427
• TCP port: 139
Scanning
• UDP port: 427
• TCP ports: 9220, 9500
HP device status
UDP port: 161
Faxing
• UDP port: 427
• TCP port: 9220
HP device installation
UDP port: 427"

IPod mini won't hold the full capacity of songs - HELP PLEASE!

In the past few weeks, my library has grown from 500 to maybe 850 songs. Since the ipod mini holds 1000(is that correct?) I should have no problem. Well there is one: it sais "there is not an efficient amount of space" or whatever, meaniing i have too many songs. So i look on my mini and it says that there are only 590 songs on it! There's plenty of room! So, can't it hold 850?
please help!
Sincerely,
Lauren

See your other post. There really is no need to ask the same question twice in the space of a few minutes. : )

TS4009 storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?

storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?

Welcome to the Apple Community.
Purchasing additional iCloud storage will not give you additional storage on your device.

HT1351 I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Plea

I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Please help

The iPod's firmware is corrupt. You'll need to restore it again in iTunes. If necessary, place the iPod in recovery mode for iTunes to recognize the device. Use the instructions in this Apple support document to walk you through the process of placing the iPod Touch into recovery mode.
iOS: Unable to update or restore
B-rock

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

Just purchased a new mac mini 3GHz Intel Core i7, with 16GB ram version 10.10.1. With it i purchased a new wireless keyboard. All of a sudden I was not able to use the #1 key. I thought I had a defected newly purchased keyboard. I pulled out my older

Just purchased a new mac mini 3GHz Intel Core i7, with 16GB ram version 10.10.1. With it i purchased a new wireless keyboard. All of a sudden I was not able to use the #1 key. I thought I had a defected newly purchased keyboard. I pulled out my older wireless keyboard, and the same thing happened. It must not be the keyboard if it happened to two different keyboards. I have a habit of restarting my computer, when things don't work, I find it helps, and sure enough, everything works. Today, it happened again. Does anyone know what is causing this to happen?

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Try reinstalling Yosemite with out losing stuff. See:
OS X Yosemite: Reinstall OS X

HT1918 I have created a free apple Id and I am not able to use it further please do the need full

I have created a free apple Id and now I am not able to use it further

Hello Asokwah,
Sign out from your pple Id on your Device and Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and then Sign In with your Apple Id here and Under your Primary Email Address click on Resend Next to Verification Email Sent. Now Go to your Email Account and Verify your Apple Id again by clicking in the Link inside the Mail that you might have received from Apple. Now Sign In on your Device and try to make a Purchase and if it is for the first time then you will be asked to Review your Account and if you have entered your Credit/Debit card in your Account then you will have to just Enter your 3 Digits CVV Number and then click on Done. And then you can try downloading any Application from AppStore or Music from iTunes Store and check if its working.

Not able to see full output when run in backgroun

This is a continuation of my question I previously asked:
I was trying to write a simple list with lot of headings.
For example:
WRITE: /6 'TitleA', 29 'TitleB', 55 'TitleC', 80 'TitleD', 106 'TitleE',
131 'TitleF', 157 'TitleG', 172 'TitleH', 198 'TitleI'.(it goes upto 400 characters)
I could not see the list titles after a particular length. So, I adjusted the settings to more than 255 in the report title and yes I can see the full output now. But I can not see the full output (and not able to print full) when I run the report in background.
So what can I do to see (and able to print) the full output even when I run in background or normal mode? I think there should be some solution for this.
Thanks.

Hi,
Execute this report with spool number. this program will increase the width of the spool.it is SAP utility program.
Laxman
*& Report Y_SPOOL_WIDTH_INCRESE                                       *
REPORT y_spool_width_increse     LINE-SIZE 80.              .
This is a SAP utility report to allow display of
spool request lists with more than 255 columns in
releases 4.6B and 4.6C (4.6D kernel must be used)
PARAMETERS: rqident LIKE tsp01-rqident,
            firstl TYPE i DEFAULT 0,
            lastl TYPE i DEFAULT 0.
global data from LSPOXTOP
DATA: rc(10) TYPE c,
errmsg(100) TYPE c,
status LIKE sy-subrc,
dsn_type(8) TYPE c.
DATA: BEGIN OF data_set_line,
data_length(5),
precol(1),
DATA_LINE(1000),
data_line(5000), "MODAB
END OF data_set_line,
data_set_length(5) TYPE c.
TABLES: tsp01, tst05, tspoptions.
DATA: temse_name LIKE tst01-dname,
temse_client LIKE tst01-dclient,
temse_handle LIKE rststype-handle,
temse_part LIKE tst01-dpart,
temse_objtyp LIKE tst01-dtype,
temse_rectyp LIKE rststype-rectyp,
temse_charco LIKE tst01-dcharcod.
DATA: is_otf.
global data from LSPOCTOP
DATA: BEGIN OF spoc
, escape
, prtctrl
, first_bytes(4) " collection of the first bytes of the
" escape sequences, which I am searching for.
, prtctrl_start_length TYPE i
, prtctrl_total_length TYPE i
, prtctrl_start(10)
, symbol_low_start(10)
, symbol_hgh_start(10)
, symbol_start_length TYPE i
, icon_start(10)
, icon_start_length TYPE i
, icon_sel TYPE i VALUE 1
, frame_start(10)
, frame_start_length TYPE i
, END OF spoc.
FIELD-SYMBOLS: TYPE c
copied from RSPO_DISPLAY_ABAP_SPOOLJOB
DATA: buffer LIKE data_set_line OCCURS 1000.
TABLES: tsp02l.
SELECT SINGLE * FROM tsp01 WHERE rqident = rqident.
IF sy-subrc <> 0.
WRITE: / 'Spool request does not exist:'(001), rqident.
EXIT.
ENDIF.
CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
EXPORTING
    access        = 'DISP'
    spoolreq      = tsp01
EXCEPTIONS
    no_permission = 1
    OTHERS        = 2.
IF sy-subrc <> 0.
WRITE: / 'No authorization to display'(002).
EXIT.
ENDIF.
PERFORM read_data TABLES buffer
USING tsp01 firstl lastl.
IF sy-subrc <> 0.
WRITE: / 'Error reading spoolo request'(003).
EXIT.
ENDIF.
IF is_otf = 'X'.
WRITE: / 'This spool request is not an ABAP list'(004).
EXIT.
ENDIF.
PERFORM display_data TABLES buffer USING tsp01-rqpaper tsp01-rqident.
FORM get_spool_line.
DO.
    IF temse_rectyp+1(1) = 'Y'.
      CALL 'C_RSTS_READ'
      ID 'HANDLE' FIELD temse_handle
      ID 'BUFF' FIELD data_set_line
ID 'BUFFLG' FIELD 1006
      ID 'BUFFLG' FIELD 5006 "MODAB
      ID 'ALLINE' FIELD 'X'
      ID 'BINARY' FIELD ' '
      ID 'SHOWLG' FIELD 'X'
      ID 'RC' FIELD rc
      ID 'ERRMSG' FIELD errmsg.
      status = sy-subrc.
    ELSE.
      CALL 'C_RSTS_READ'
      ID 'HANDLE' FIELD temse_handle
      ID 'BUFF' FIELD data_set_line+1
ID 'BUFFLG' FIELD 1005
      ID 'BUFFLG' FIELD 5005 "MODAB
      ID 'ALLINE' FIELD 'X'
      ID 'BINARY' FIELD ' '
      ID 'SHOWLG' FIELD 'X'
      ID 'RC' FIELD rc
      ID 'ERRMSG' FIELD errmsg.
      status = sy-subrc.
      data_set_line(5) = data_set_line+1(5).
      data_set_line-precol = ' '.
      ADD 1 TO data_set_line-data_length.
    ENDIF.
    status = sy-subrc.
    IF status <> 6. " EOF, error condition, or got data
      EXIT.
    ENDIF.
end of this part, try to open next part
    ADD 1 TO temse_part.
    CALL 'C_RSTS_CLOSE'
    ID 'HANDLE' FIELD temse_handle
    ID 'RC' FIELD rc
    ID 'ERRMSG' FIELD errmsg.
    status = sy-subrc.
    IF status = 0.
      CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
      EXPORTING
      authority = 'SP01'
      client = temse_client "hjl
      name = temse_name
      part = temse_part
      IMPORTING
      charco = temse_charco
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
      rectyp = temse_rectyp
SIZE =
STOTYP =
type =
      objtype = temse_objtyp
      EXCEPTIONS
      fb_error = 1
      fb_rsts_other = 2
      no_object = 3
      no_permission = 4
      OTHERS = 5.
      status = sy-subrc.
    ENDIF.
    IF status = 0.
      CALL 'C_RSTS_OPEN_READ'
      ID 'HANDLE' FIELD temse_handle
      ID 'CLIENT' FIELD temse_client "hjl
      ID 'NAME' FIELD temse_name
      ID 'PART' FIELD temse_part
      ID 'TYPE' FIELD temse_objtyp
      ID 'CONV' FIELD ' '
      ID 'ALLINE' FIELD 'X'
      ID 'BINARY' FIELD ' '
      ID 'RECTYP' FIELD temse_rectyp
      ID 'CHARCO' FIELD temse_charco
      ID 'PROM' FIELD 'I'
      ID 'RC' FIELD rc
      ID 'ERRMSG' FIELD errmsg.
      status = sy-subrc.
    ENDIF.
ENDDO.
IF status = 4.
    status = 12. "EOF
ENDIF.
IF status = 8.
    status = 40. "Line too long
ENDIF.
data_set_length = data_set_line-data_length.
ENDFORM.                    "GET_SPOOL_LINE
*&      Form READ_DATA
      text
     -->BUFFER     text
     -->TSP01      text
     -->VALUE(FIRSTtext
     -->VALUE(LAST)text
FORM read_data TABLES buffer
USING tsp01 LIKE tsp01 value(first) TYPE i
value(last) TYPE i.
DATA: lines TYPE i.
REFRESH buffer.
CLEAR is_otf.
temse_client = tsp01-rqclient.
temse_name = tsp01-rqo1name.
temse_part = 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = temse_client
name = temse_name
part = temse_part
IMPORTING
charco = temse_charco
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
rectyp = temse_rectyp
SIZE =
STOTYP =
type =
objtype = temse_objtyp
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF sy-subrc = 0.
    IF temse_objtyp(3) = 'OTF'.
      is_otf = 'X'.
    ENDIF.
ELSE.
    EXIT.
ENDIF.
CLEAR temse_handle.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD temse_handle
ID 'CLIENT' FIELD temse_client "hjl
ID 'NAME' FIELD temse_name
ID 'PART' FIELD temse_part
ID 'TYPE' FIELD temse_objtyp
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD temse_rectyp
ID 'CHARCO' FIELD temse_charco
ID 'PROM' FIELD 'I'
ID 'RC' FIELD rc
ID 'ERRMSG' FIELD errmsg.
status = sy-subrc.
IF status = 0.
    DO.
      PERFORM get_spool_line.
      IF status <> 0 AND status <> 40 AND status <> 12.
        PERFORM close_job.
        EXIT.
      ENDIF.
      IF status <> 12.                                      " 12 = End
        IF NOT ( data_set_length IS INITIAL ).
          data_set_line-data_length = data_set_length - 1.
        ENDIF.
        ADD 1 TO lines.
        IF lines >= first.
          APPEND data_set_line TO buffer.
        ENDIF.
        IF ( NOT last IS INITIAL ) AND ( lines >= last ).
          EXIT.
        ENDIF.
      ELSE.
        IF lines = 0.
          PERFORM close_job.
          EXIT.
        ENDIF.
        IF lines < first .
          PERFORM close_job.
          EXIT.
        ENDIF.
        EXIT.
      ENDIF.
    ENDDO.
    PERFORM close_job.
ENDIF.
ENDFORM.                    "READ_DATA
FORM CLOSE_JOB *
FORM close_job.
IF status <> 0 AND status <> 12.
    CALL 'C_RSTS_CLOSE'
    ID 'HANDLE' FIELD temse_handle
    ID 'RC' FIELD rc
    ID 'ERRMSG' FIELD errmsg.
    MESSAGE e112(po) WITH status rc errmsg RAISING read_error.
ENDIF.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD temse_handle
ID 'RC' FIELD rc
ID 'ERRMSG' FIELD errmsg.
status = sy-subrc.
IF status <> 0.
    MESSAGE e112(po) WITH status rc errmsg RAISING read_error.
ENDIF.
ENDFORM.                    "CLOSE_JOB
*&      Form DISPLAY_DATA
      text
     -->BUFFER     text
     -->RQPAPER    text
     -->RQID       text
FORM display_data TABLES buffer USING rqpaper LIKE tsp01-rqpaper
rqid LIKE tsp01-rqident.
DATA: line_length TYPE i, gcol TYPE i, glines TYPE i,
line_length2 LIKE rststype-linelength,
v, v2.
CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
PERFORM spooldata_write_init. "MODAB
select single * from tspoptions where spoption = 'REALWIDTH'.
if sy-subrc = 0.
v = 'X'.
endif.
select single * from tspoptions where spoption = 'REALHEIGHT'.
if sy-subrc = 0.
v2 = 'X'.
endif.
IF NOT v IS INITIAL OR NOT v2 IS INITIAL.
    gcol = 0.
    glines = 0.
    SELECT SINGLE * FROM tsp02l WHERE pjident = rqid
    AND pjnummer = 0.
    IF sy-subrc = 0.
      gcol = tsp02l-columns.
      glines = tsp02l-lines.
    ELSE.
      CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
      EXPORTING
      layout = rqpaper
      IMPORTING
ANSWER =
      columns = gcol
      lines = glines
PFORMAT =
    ENDIF.
ENDIF.
IF gcol < 80 OR v IS INITIAL.
    gcol = 255.
ENDIF.
IF glines < 5 OR v2 IS INITIAL.
    glines = 0.
ENDIF.
IF gcol >= 1024. "MODAB
    gcol = 1023.
ENDIF.
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE gcol
LINE-COUNT glines. " make a wide list
SET BLANK LINES ON.
LOOP AT buffer.
    data_set_line = buffer.
    IF data_set_line-precol = 'P'.
      IF data_set_line(1) = ' '. " Echter Vorschub ?"
        NEW-PAGE.
      ENDIF.
      CONTINUE.
    ENDIF.
Zeilenlänge berechnen, falls unbekannt.
    IF data_set_line-data_length IS INITIAL.
      line_length = STRLEN( data_set_line-data_line ).
    ELSE.
      line_length = data_set_line-data_length.
    ENDIF.
    IF line_length > 0.
      line_length2 = line_length.
      PERFORM spooldata_write USING data_set_line-data_line "MODAB
      line_length2
      1.
    ELSE.
      " Leerzeile
      SKIP.
    ENDIF.
ENDLOOP.
ENDFORM.                    "DISPLAY_DATA
copied from RSPO_SPOOLDATA_WRITE
FORM spooldata_write USING value(spool_data)
value(data_length) LIKE rststype-linelength
value(start_pos) LIKE sy-colno.
function globals
DATA: lpos LIKE sy-colno
        , rest_len TYPE i
        , area_len TYPE i
        , next_hot TYPE i " offset of next special character
        , cols TYPE i " columns used by special character
        , bytes TYPE i " bytes used by special character
        , hot2
        , hot3
        , hot4
        , hot5
        , hot6
        , hot7
        , BEGIN OF escape_trick
        , x1(1) TYPE x
        , END OF escape_trick
        , the_prtctrl(5) TYPE c
Because of a problem within the ABAP listprocessing, I shall
never output the same icon side by side with the same color
and without a gap.
As I don't know the data, I will use two different variables
alternatively.
        , icon_id1 LIKE icons-l4
        , icon_id2 LIKE icons-l4.
FIELD-SYMBOLS:
IF start_pos < 2.
write at / ' ' no-gap.
    NEW-LINE.
    lpos = 1.
ELSE.
    lpos = start_pos.
ENDIF.
rest_len = STRLEN( spool_data ).
DESCRIBE FIELD spool_data LENGTH area_len IN CHARACTER MODE.
IF data_length = 0.
    " fine.
ELSEIF data_length .
MODAB
      PERFORM write_bigfield USING
      next_hot
      lpos.
WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
      ADD next_hot TO lpos.
      SUBTRACT next_hot FROM rest_len.
      ASSIGN +6(1).
          ELSE.
            hot7 = '?'.
          ENDIF.
        ELSE.
          hot6 = '?'.
        ENDIF.
      ELSE.
        hot5 = '?'.
      ENDIF.
      IF hot5 = space.
        IF hot6 = space.
          IF hot7 = space.
            IF spoc-icon_sel = 1.
              WRITE AT lpos(4) icon_id1 AS ICON.
write at lpos icon_id1 as icon no-gap.
            ELSE.
              WRITE AT lpos(4) icon_id2 AS ICON.
write at lpos icon_id2 as icon no-gap.
            ENDIF.
            cols = 4.
            bytes = 7.
          ELSE.
            IF spoc-icon_sel = 1.
              WRITE AT lpos(3) icon_id1 AS ICON.
write at lpos icon_id1 as icon no-gap.
            ELSE.
              WRITE AT lpos(3) icon_id2 AS ICON.
write at lpos icon_id2 as icon no-gap.
            ENDIF.
            cols = 3.
            bytes = 6.
          ENDIF.
        ELSE.
          IF spoc-icon_sel = 1.
            WRITE AT lpos(2) icon_id1 AS ICON.
write at lpos icon_id1 as icon no-gap.
          ELSE.
            WRITE AT lpos(2) icon_id2 AS ICON.
write at lpos icon_id2 as icon no-gap.
          ENDIF.
          cols = 2.
          bytes = 5.
        ENDIF.
      ELSE.
        "rite at lpos(1) icon_id as icon.
        WRITE AT lpos(1) '#' NO-GAP. " Not enough space for any icon.
        cols = 1.
        bytes = 4.
      ENDIF.
    ENDIF.
    IF .
    ELSE.
      EXIT.
    ENDIF.
ENDWHILE.
MODAB
IF rest_len > 0.
    ASSIGN
    rest_len
    lpos.
ENDIF.
ENDFORM.                    "SPOOLDATA_WRITE
*&      Form WRITE_BIGFIELD
      text
     -->VALUE(FIELDtext
     -->VALUE(LEN) text
     -->VALUE(POS) text
FORM write_bigfield USING value(field) TYPE c
value(len)
value(pos).
FIELD-SYMBOLS
DATA: chunk TYPE i.
WHILE len > 0.
IF len > 255.
chunk = 255.
ELSE.
chunk = len.
ENDIF.
WRITE AT pos field(chunk) NO-GAP.
ADD chunk TO pos.
len = len - chunk.
IF len >
0.
      field = field+chunk.
    ENDIF.
ENDWHILE.
ENDFORM.                    "WRITE_BIGFIELD
*&      Form SPOOLDATA_WRITE_INIT
      text
FORM spooldata_write_init.
DATA: BEGIN OF escape_trick
, x1(1) TYPE x
, END OF escape_trick
FIELD-SYMBOLS: .
spoc-first_bytes+0(1) = spoc-prtctrl_start(1).
spoc-first_bytes+1(1) = spoc-frame_start(1).
spoc-first_bytes+2(1) = spoc-icon_start(1).
spoc-first_bytes+3(1) = spoc-symbol_low_start(1).
ENDFORM.                    "SPOOLDATA_WRITE_INIT

Not able to use my money

In iTunes I have an account balance that I am not able to use. I tried to buy different items and it wont allow it, but I can buy "FREE" ones. Is there a min amount that I am requaired to have in my account? OR is there some other reason why I am not able to spend out of my account. I used a 50 gift card and spent all but 6 bucks. Now its requiering a credit card or gift card code. But I still have a balance.

I tried to buy different items and it wont allow it
Are you attempting to purchase items from teh iTunes Apps store?
If you ar ein Canada, you cannot use gift card balance to purchase apps.
You can only purchase songs, videos or movies with a gift card.
You need a CC to purchase apps in Canada.

Not able to use Mac after booting windows from bootcamp!

Hello,
In my Mac mini, I dual booted it by installing windows on it using bootcamp!
Could you help me how to go to mac partition and i am also not able to use windows!
Pls help
Punit Khatri
+91-9925326095

Hi there:
You may be able to start up the Mac in such a way as to look
for an OS X volume at the same time using a keyboard comb-
ination at startup... Press key(s) immediately after start tone.
Press Option (opt) key during startup will start in Startup Manager
where you can select an OS X volume or network volume to run.
{There is also a way to choose a hardware test for diagnostic
purposes on startup, too. Some macs have features in the OS
to include a 'recovery' mode on later models.}
• Startup key combinations for Intel-based Mac:
http://support.apple.com/kb/HT1533
PS: if you decide to remove Windows, you should also
consider Boot Camp to remove the partition it made.
Hopefully this helps.
Good luck & happy computing!

I set my passcode in arabic then I changed the language to English, when I wanted to open my ipad later there was no arabic letters to enter my arabic passcode..and I am not able to use my Ipad again please let me know what to do

I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do

Hello Shaholeh87,
Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
http://www.apple.com/itunes/download/
Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
Open iTunes Application on your computer and then start the process step by step
1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
(If the low battery screen appears, charge your device for a few minutes and try the process again.)
4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
Hope this process will help you

My ipod is not able to load my contacts when i select it

my ipod is not able to load my contacts when i select it. Can u help me please??

From which computer app (name and version) are you trying to load (really sync) the contacts?
What computer OS and version are you using?
What iOS version?

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
Thank you in advance
arl

Hi Keith, sorry for my late reply.
Surely I am able to connect to the help function when Icontact the website
of AdobeLR5.The problem is as follows,
When I open LR5 on my computer and work with it and try to open the help
function in the software, I don't get it.
When I bought the CD I was naiv enough to believe that I get an independent
working software. I learned in the meantime, that the seller does not allow
to work with, without being connected to them.
I don't believe that I am paranoid, but I like to buy something and use it
without to inform the supplier that I do it. Otherwise I could have bought
the license fpr LR5 via internet.
Best regards
Karl
2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
I bought a cd with Lightroom 5. After installation and registration I
am not able to use 'help' function and I cannot update the software. I
anyone able to give me a hint how to handle it? Thank you ind advance Karl
kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
marked Keith_Reeder
<https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
reply on I bought a cd with Lightroom 5. After installation and
registration I am not able to use 'help' function and I cannot update the
software. I anyone able to give me a hint how to handle it? Thank you ind
advance Karl
<https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

I am getting a msg that pllocked and connected to wifi. I can not hit the ok button and my apps are visible. Not able to use at all.

I am getting a msg that my ipad hasnt been backed up in 2 wks. I have plugged in (at 100%) and locked and connected to wifi. I can not hit the ok button and my apps are showing in the back ground. Not able to use at all. How can I get my ipad working again.
thanks,

Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router. Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address. To correct this you can reboot your router by unplugging it from power for about 30 seconds.
It wouldn't hurt to also reset your iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting assistance.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Ipod Mini not able to use full capacity?

Similar Messages

Maybe you are looking for