Ipod mini not being recognised!

My ipod mini is all of a sudden not being recognised on i-tunes. I have tried using a different cable, different pc etc etc.
What happened!

when I turned on my ipod mini today, a sad face with an exclamation point came up! I haven't used it for about 3 weeks and thought it was a battery discharge problem. Before I connected it to my laptop, I update the iTunes software and as soon as I connect the iPod, the sad face comes up again, followed by a few seconds of the frozen battery and then blank! I tried restoring but can't put in in Disk Mode.
Any idea what can be happening?
Marcela

Similar Messages

  • IPod Touch not being recognised on newly-installed OSX Leopard (10.5.4)

    I have an iPod Touch (software version 2.0.2) which is not being recognised in OSX Leopard (version 10.5.4) which I just loaded onto the Powerbook G4. It was recognised under OSX 10.4, although the iPod Touch didn't launch iTunes when it was connected. It was only recognised after iTunes was launched.
    I have read some previous posts about iPod Touch not being recognised. One of the recommendations is to reinstall the entire iTunes package. It this must be done to sort the problem, will all of the music in iTunes be lost?
    Note my daughter's iPod, when connected, launches iTunes and is recognised.
    Help, please.

    Hi,
    Reinstalling iTunes *will not* erase your music library.
    As a matter of course I do, and in fact Apple recommend that you back up your music library, there is an option to do this under "File" in iTunes. It is really quite sensible to have your purchased and other music files saved elsewhere as well as on your main hard drive, it can save a lot of time and hassle.
    Good luck,
    Dud.
    Message was edited by: Duddo - typo

  • My IPOD is not being recognised by my Alpine CDE113BT Headunit

    My IPOD is not being recognised by my Alpine CDE 113BT Headunit. I have reset both my IPOD & Headunit & still not connection. I have tried one other Ipod & I Phone with no problems. An Error Message - 01 came on the display the last time it was connected. Any ideas.

    At present I have no power to the Gen 7, so need to get some power to it I think.  I pressed the buttons as you suggested, but nothing is showing up at this point.  Thank you for your response as the more I can rule out before  I take it back the better I think.

  • Ipod Touch not being recognised/unknown device

    Ipod Touch not being recognised - help!?
    It says it's a code 43 - Unknown device/device not recognised. Doesn't sound good.
    Tried all of the things the itunes website suggested such as of course turning it off and on again, restarting services, reinstalling itunes. I know from experience that when you take it in to the shop they want to charge you almost as much as you bought it for to fix a minor problem. Thanks

    Hi,
    Reinstalling iTunes *will not* erase your music library.
    As a matter of course I do, and in fact Apple recommend that you back up your music library, there is an option to do this under "File" in iTunes. It is really quite sensible to have your purchased and other music files saved elsewhere as well as on your main hard drive, it can save a lot of time and hassle.
    Good luck,
    Dud.
    Message was edited by: Duddo - typo

  • HT201210 I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    Try and force iPod into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPod
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My ipad (mini) and ipod are not being recognised by itunes?

    When connecting both my ipad(mini) and ipod(7th gen) they are not being recognised by itunes.  I last connected just over a month ago and everything was fine.  When I last connected I also connected my old ipod(3rd gen) to add new playlists beforing giving to someone else.  When I first plugged in I got a message saying that the cable was not Apple authorised - both my cables are cables supplied with my ipod/ipad so came from Apple?  When I run diagnostics it says
    "Most recent devices not currently connected,  - iPod Nano (3rd Gen) and iPad Mini running firmware 6.1.3"  This is the first time I have tried to connect since updated my iPad with IOS7?  Please help I wanted to put Christmas playlists on both devices.....!

    Device Not Recognised  >  http://support.apple.com/kb/TS1538

  • Ipod nano not being recognised by computer, 5th gen

    my ipod is not beng recognised by my laptop as my ipod will not turn on and is charged and is also not being recgonised by any other devices such as docking stations. It will not reset for me and have tried numerous links online, please help???!!!!

    If the iPod isn't powering on and you are positive that you are using a working USB cable and plugging the iPod into a working USB port or wall adapter, it could be a sign of some hardware issue with the iPod such as a dead battery or damaged/faulty logic board.
    B-rock

  • My Generation 7 iPod is not being recognised by either my PC or my laptop.  My older 2gb iPod IS being recognised though.  How can I get the Gen 7 iPod to be recognised?  This is a recent issue, as it was working fine before.

    My 7th Generation iPod has suddenly stopped being recognised by my PC and laptop.  I have updated all operating systems for Windows and iTunes, yet it still will not be found.  I have had the Generation 7 since June 2013.
    I have plugged in both my 7th Generation and my 2nd Generation iPods (7th first, then 2nd a few minutes later on.), and the 2nd generation was picked up instantly.
    I have checked to ensure that it is not a problem with the USB port, and that is recognising and installing drivers as necessary, so before I take the iPod back to the store, is there anything else that I can try to get it to be found.
    Both iPods had run out of charge if that helps.
    Thank you in advance.

    At present I have no power to the Gen 7, so need to get some power to it I think.  I pressed the buttons as you suggested, but nothing is showing up at this point.  Thank you for your response as the more I can rule out before  I take it back the better I think.

  • My nano 6th generation ipod is not being recognised by windows. have done all step recomended but no joy?

    My ipod nano has suddenly stopped being recognised in itunes.Have uninstalled itunes and doenloaded again and installed latest version of vista,also installed google chrome.Also reset nano but still will not work.

    Can't see your iPod in Windows Explorer or iTunes? Check Device Manager first (right-click on My Computer, choose Manage, and then select Device Manager). If no devices appear in the Windows Device Manager, then keep reading.
    Note: If this started right after you updated your Windows XP computer to Service Pack 2, look here first:
    Microsoft KB #893249
    SYMPTOMS
    After you install Microsoft Windows XP Service Pack 2 (SP2) on a Windows XP-based computer, the Device Manager window is blank or some devices no longer appear. If some devices do appear and you remove one device, all devices are removed from Device Manager.
    Back to the top
    CAUSE
    This problem occurs because of a problem in the FixCSS.exe tool. When you install Windows XP SP2, the installer runs the FixCSS.exe tool to correct some mild corruptions. However, the FixCSS.exe tool does not delete the temporary subkeys in registry keys. Therefore, the temporary subkeys confuse the Plug and Play manager and many devices are incorrectly enumerated.
    Back to the top
    RESOLUTION
    A supported hotfix is now available from Microsoft, but it is only intended to correct the problem that is described in this article. Only apply it to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Windows XP service pack that contains this hotfix.
    To resolve this problem immediately, contact Microsoft Product Support Services to obtain the hotfix. For a complete list of Microsoft Product Support Services telephone numbers and information about support costs, visit the following Microsoft Web site:
    http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)

  • IPod shuffle not being recognised in iTunes in a new country

    Hi there, I initially used my iPod shuffle (4th Generation) in Australia on my laptop and it was recognised in iTunes with no problem. Now I want to connect my iPod shuffle on a new computer in Greece. My iPod shuffle however is being recognised in 'my computer', but not in iTunes.
    Help would be most appreciated ASAP, what should I do?
    Thank you!

    The flashing light is good.  It means that the system (the OS) is seeing the iPod's "disk," and it is actually mounted.  When the light is flashing, it means DO NOT DISCONNECT (eject shuffle before physically disconnecting).
    When do get this error code?  Is it when the iPod is syncing with iTunes? 
    If you have other USB devices connected, you may want to try it after shutting down (powering off) the computer and disconnecting all USB devices, including any hub.  You can leave standard keyboard and mouse connected, if normally used.  If your computer is a laptop, connect its power adapter, so that it's not running on battery power.  Do this to reset your shuffle
    http://support.apple.com/kb/ht1655
    Start up the computer, run iTunes, and connect the shuffle to a direct USB port on the computer.  Any difference?

  • New Ipod Touch not being recognised by itunes

    Hi, can someone please help!
    I purchased a new iPod touch (the one with the camera )the other day and yet so far iTunes nor my computer has recognized it.
    I have tried many things:
    Updating itunes
    Uninstalling and reinstalling itunes
    Unblocking itunes related software in my firewall
    Trying different USB ports
    Turning ipod off and on in different ways
    Restarting computer
    Using different usb cords
    Nothing has worked so far! My computer meets the requirements i think. Its a windows professional with a service pack 3 and it has usb 2.0 ports. I have a working itunes account and store and i have itunes version 10.1. My ipod has full charge also
    My computer makes the noise when something is plugged in, yet my ipod is not appearing under devices on itunes. My old nano is being picked up fine yet my new ipod touch isnt!
    I dont know whether i should return to the store i purchased it at or if it is a computer malfunction thats the probelm.
    Please please help! I've reached a dead end!

    Try it on another computer.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • IPod touch not being recognised by iTunes, recognised in "My Computer"

    Hello,
    I am running Windows 7 Ultimate, I have iTunes 10.
    I have tried restoring the iPod touch, I have tried switching it on and off. I have tried with each USB port, my security settings are fine. I have uninstalled and reinstalled iTunes, I have restarted the computer. I have reset the ipod.
    It has still not been recognised by iTunes.
    What can I do to get the iPod touch to be recognised by iTunes?
    vvv on "My Computer" at the bottom I can see this. Here I can access my DCIM folder, which contains some photos and videos.
    iPod information; Version: 5.1.1 (9B206) Model: MD057BT
    6GB 4th Generation
    Thanks,
    Aimee.

    So the Apple Mobile Device serviced is installed and running on your system? You tried to uninstall and re-install iTunes and all Apple related software? 
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Simply responding yes doesn't do much to help.  We need as much detail as we can get in order to help you troubleshoot this issue. Otherwise, we are just pulling at straws.
    B-rock

  • Help.. brand new Ipod 80gb not being recognised by Computer or itunes

    Replaced a ipod mini that was stolen from my house with a brand new 80gb ipod. Plugged it into the same computer that had been used successfully with the mini and the ipod will not be seen by either the computer or itunes. It will charge through the usb post no problem but when you plug it in it originally came up with the windows new hardware wizard, as apple have for some misguided reason stopped supplying CD's, the wizard can not find the correct driver, and fails to install. When Itunes is running nothing appears. I have been through the 5 R's, or should I say 4 r's as the fifth rely's on itunes recognizing the ipod before you can restore, countless time, so please unless you are sure don't ask me to click the hold button on and off yet again.
    Plugged the ipod into an old laptop with USB 1.0 ports and the ipod was recognized which would suggest it is my main comp's usb ports that are at fault, but as two previous ipod mini's worked without fault I find this hard to believe. I think if only I had the correct driver to install I could solve this problem easily. Can anyone send me the correct driver for an 80gb ipod.
    It hopefully goes without saying that I have downloaded the latest itunes software and gone through all the post's on the this site. I thought I'd cracked it with the UBSSORT file post but it was not to be....to tell you the truth if it's this complicated I'd rather send it back and buy a sony mp3 or even an ipod nano. At my wits end so please help Obi one, your my only hope

    Big Big thank you to Varun at Apple Service & Support e-mailed me the following article and after following the instructions, I'm up and running. Thank you ......
    Link: http://www.info.apple.com/kbnum/n305136
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

  • IPod is not being recognised by Windows

    After installing iTunes 7, It updated my 30GB iPod video to firmware 1.2, on my iPod apparently it seemed to be loading the firmware, but after it finished my iPod was not detected as an iPod anymore on the windows explore but as an unformatted driver.
    when I opened iTunes 7 it said it had to be restored.
    When the iPod is unplugged I can play my music, see my photos and view my videos in it.
    I do not want to restore it because I'll loose all my music and files I have in it, I tried using iPod data Recover to make a backup, but since it's shareware it wont allow to do any backups...
    Is there a solution to this?
    I've tried downgrading to an older firmware with no luck.
    I searched the forum for hours for a solution without luck.

    Can't see your iPod in Windows Explorer or iTunes? Check Device Manager first (right-click on My Computer, choose Manage, and then select Device Manager). If no devices appear in the Windows Device Manager, then keep reading.
    Note: If this started right after you updated your Windows XP computer to Service Pack 2, look here first:
    Microsoft KB #893249
    SYMPTOMS
    After you install Microsoft Windows XP Service Pack 2 (SP2) on a Windows XP-based computer, the Device Manager window is blank or some devices no longer appear. If some devices do appear and you remove one device, all devices are removed from Device Manager.
    Back to the top
    CAUSE
    This problem occurs because of a problem in the FixCSS.exe tool. When you install Windows XP SP2, the installer runs the FixCSS.exe tool to correct some mild corruptions. However, the FixCSS.exe tool does not delete the temporary subkeys in registry keys. Therefore, the temporary subkeys confuse the Plug and Play manager and many devices are incorrectly enumerated.
    Back to the top
    RESOLUTION
    A supported hotfix is now available from Microsoft, but it is only intended to correct the problem that is described in this article. Only apply it to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Windows XP service pack that contains this hotfix.
    To resolve this problem immediately, contact Microsoft Product Support Services to obtain the hotfix. For a complete list of Microsoft Product Support Services telephone numbers and information about support costs, visit the following Microsoft Web site:
    http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)

  • My ipod touch and all ipods are not being recognised on my computer?

    when i plug my ipod touch into my computer nothing happens, my ipod doe not charge and wont sync.
    i went on to my "devices and "printers section and my ipod was under "unspecified" it told me to troubleshoot it but when i did it said i haved a problem with PnP devices. it also said that windows would try to solve the problem but it didnt do anything and i still cant connect my ipod becuse it does not do anything, any advice?

    Could the error number be: 0xE........?
    Unknown Error containing "0xE" when restoring: To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

Maybe you are looking for

  • Does any one know how to resolve the error while flat file upload

    Hey guys, I am so struck with this problem, please do let me know if anyone has any suggestions and ideas. 1. I created three InfoObjects, Material Number, Name and Price,which is  a keyfigure and has data type DEC and fixed currency USD. Material Nu

  • Erase and sync issues (backup/restore)

    Hello. I have an issue with the backup/restore with my iPhone. Sometimes, it is difficult to find an answer that fits your problem exactly on the forum!  Lots of good stuff though! This post will be little longer than normal, but I need to get all th

  • Using row-wise multi-value GROUP system session variable in report filter

    The title says it all except I am using 10g OBIEE. What I want to do is filter on the dynamic system session variable GROUP created in a row-wise initialization block. The GROUP vriable is being set up correctly and it shows the user dynamically put

  • Sketch Filter not working in smart filter mode?

    I have been trying to use the sketch filter using Deke McClellans technique on turning type to fire, My CS5 Photoshop seems to work perfectly through applying the ripple effects but when I try to apply the Sketch Filter it is not available along with

  • Publishing to the Web

    I'm creating a form that will be accessed from the web. I've done the "Publish to Repository" and am able to bring the document up, but it does not open within the browser. This is a miner issue, but I'm looking for it to me opened within the browser