Ipod Movie/Video with Audio problems

I have some music videos, it would only sync as imovie...but even so their shouldnt be a problem with the audio function of the ipod should their? i just received the ipod for christmas but the videos i have uploaded have no sound....reguler songs work fine...could someone help me with the problem so i could enjoy the music of my videos?
Video Ipod Windows XP Pro 73GB left on Ipod

Sounds like the video files might not be in the correct format for use with the iPod. I would recommend that you download an iPod Video Converter and run the files through it, and then try syncing the newly created files on to the iPod.
I've used Videora, and have had some good results with it. The only problem that I've really run into is that sometimes the audio is a few seconds out of sync with the video. It's not soo bad that watching the video files is unbearable, but that's all up to you.
You can try a Google search for iPod Video Converter, or you can check on VersionTracker.com
Hope this is helpful.
CG

Similar Messages

Aligning Video with Audio

I am attempting to align video with audio of a clip from another camera. Is there an incremental way of aligning. At the moment when I move the video clip on the timeline it is not fine enough to to align.

select the clip in the timeline then nudge it left and right using the trim keys, the comma and period keys, to nudge left and right by one frame at a time (the square brackets also do the same). if you hold down the shift key at the same time you'll get a multi-frame nudge ... the number of frames depends on your "multi-frame trim size" setting in your Final Cut Pro > User Preferences --> Editing tab
of course, you can only nudge the clip if there is no other clip in the way, otherwise you will just get a "clip collision" ... if that is the case then you'll need to "slip" or "slide" the clip in place. exactly the same procedure/keystrokes as before, but you just need to select the slip or slide tool before you start pressing those trim keys.
cheers
Andy

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How to watch my ipod touch videos with apple tv

I am just trying to watch my ipod touch videos with apple tv.. how I can do that?

this is an user forum apple dont read or write here
if i were you i would restore it

Program to remove sound from video and join video with audio file?

With which program can I remove the sound of a video and join/sync the video file with another audio file?
Thank you

Can I suggest using something that will allow audio capture from the external mic. to start with. Then you will have a video with audio in sync, in a format that you can re encode into whatever format you wish.
But, if you must do that. Dump the video from the handycam file, then put the mics audio file with it. ffmpeg -i video ffmpeg -i audio into whatever container and codecs that you want. You may have to adjust audio-video sync
ffmpeg -i audio -itsoffset 0.1 -i video
Search this forum and the web. There are hundreds of ffmpeg examples. And the ffmpeg man
https://ffmpeg.org/ffmpeg.html
ffmpeg will do just about anything, but is a little daunting. Ask specific questions and you'll get specific answers. Or find a front end for it. I never use them.

Import video with audio question

When I start a new project and import a video with audio, then drag to the timeline , it puts the latter on audio 4 track instead of track 1. Why is it skipping 3 tracks?

. Thanks Bill. It was a mono track and the 3 above were stereo. I deleted the 3 empty tracks and now it is below the video directly. What I am also wondering about is why the video track can be widened vertically,by dragging the bottom border and the previous audio 1 track could be also, but this one can not. Is it not possible to see the waveform as I can when I imported an audio file in a different project? That one was expandable veritically.There was no video in that one.

PrObLeM WiTh IpOd pLaYiNg ViDeOs WiTh No SoUnD!! HELP ME!!

i have a ipod nano 8gb 3rd generation i just got a couple of weeks ago. i got it, read the directions, got the latest downloads, loaded itunes, put my music, videos, everything on itunes, and connected my i sync all of my music on mai ipod with no problem. but when i sync my videos onto my ipod....THERE IS NO SOUND!! the videos were previously converted before i synced them on the ipod. PLEASE HELP ME RESOLVE THIS PLEASE!!

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
but there are other applications besides MPEG Streamclip you can try as well.
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
See other tutorial articles over at iLounge...
http://www.ilounge.com/index.php/articles/tutorials/
Patrick

Can you link Audio to any video in time line so it functions as if you imported a video with audio?

Hi there...
I have video and I also have externally recorded audio to sync with it. Now I understand that you can drag the video in (delete its audio if it has any) and then drag a audio clip into the timeline and place it under neath it. I can get it synced and all that fine.
The problem I have is that it is cumbersome to edit like this. When you import a video with embedded audio if you make a cut it cuts the video AND the audio attached to it in one go. If you do it the way I am doing now you need to add extra cuts on the audio file as well. So you effectively doubling the clicks needed to edit. Also when you are deleting clips and sliding stuff about you need to be extra careful to make sure that the audio and video stays in sync.
What I am hoping for is a way to "attach" the audio to the video with out adding a long and time consuming process of rendering out a video file with it embedded.
Solutions I have tried and failed.
GROUP : This seams like the obvious thing to do.. If I group them I can select them as one, move them as one.. but if I select the cut tool it still only cuts either the video or audio.. not both.
SEQUENCE : The other option I tried is once it is synced I make a new sequence and add the sequence with the synced audo and video to it and then edit on that. I am not editing a sequence not the raw audio and video. The problem here is that while now the cut tool cuts both the video AND audio at once and I can also move and edit easily.. the problem is that now the wave form dose not show up in the audio track when you expand it. It is just a big blank green box (even though there is audio in the original sequence)
Any ideas?
Thanks

I'm still using Cs6.... I found that if you hold shift+click with the cut tool it cuts it.. I'll try link as shifting is a pain...
Maybe there is a way to set teh shift+click as the default action for the cut tool?

Converting Music Videos - With Audio

How come when i convert a music video into a mpeg-4 format, it does not have audio along with video?

I guess because it's the file format that you have to change. I went on my Limewire and downloaded mp4 video files. You don't need to convert those because they are already in the correct format. Those play with both video and audio on the iPod with no problem.

Please help with audio problems, thanks!

Hi, I'm relatively new to DVD studio Pro and so far the manual has been useful but i've run into some sound related problems. I'm a composer/sound designer and this DVD is to be my reel so these are fairly integral issues to its success.
First, I want to add a sound effect to each of the roll over states, so one sound for the "over" and one sound for the "down" state. Currently i can only add audio as the backing track for each menu.
Second, whilst most of the items on the dvd are movies that include my music, I also want to have a page purely of audio tracks which play when pressed without changing the page. How can i do this? The only DVD i've seen this done on is "The Thin Red Line" extras, promoting the soundtrack to the film.
Thanks.

Welcome to the forum/discussions CC!
Sorry to have to inform you, but unfortunately layered menus aren't supporterd with audio in DVDSP, and technically what you're attempting is a layered menu-type function - although it just may be possible with scripts, I doubt it.
Your second request can be done however and there's several ways to go about doing it.
I like DVD@ccess but others would recommend a method of simply placing the audio files in the built file of the DVD making them accessible to users.
Another method I could suggest is to make a menu page exactly like the one you want to look the same and have the song you'd like to play as the music track for that duplicated-menu in question - set the target of the link for the song in the menu to go to the menu that has that song as the music track. Repeat that for the number of songs you'd like to have this feature.

AE CS3: Crashes on export to Adobe Flash Video (with audio)

I have a 10 second comp I'm rendering to Adobe Flash Video. The comp has a wav file on it.
I have ram previewed the comp and it plays back just fine.
When I render it to Adobe Flash Video via the render queue my comp crashes at 30 frames in everytime.
However if I remove the wave file from my comp, AE will fully render the comp to an FLV file.
I have also tried replacing the wav file with another random wav file - I get the same crash everytime at 30 frames in.
I also made a comp from scratch and tried to render it to Adobe Flash Video with a wav clip and it crashes 30 frames in every time.
Please note when it hits frame 30 on the render, a window pops up ( a dos type window ) and then the window closes along with AE right away leaving me with no error messages or even an error log. I was able to get a screen cap of the error and it's attached.
I am running Windows Vista 64-bit and this is the first problem I've had with AE CS3.
Is this a known issue and is there a workaround for this?
-Charley

My apologies, I just found this support page and it helped me fix my problem:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403633
-Charley

Can I cut & past MOV videos with QuickTime Pro ?

I have a couple of DigiCam Quicktime MOV videos which I want to cut & paste.
Is this possible with a QuickTime Pro installation (under WinXP) ?
Is there any other alternative software which let me do such simple tasks with Quicktime MOV videos?
Peter

Yes.
QuickTime Player Pro allows editing of nearly any format it can "play". MPEG-1 can be viewed but not edited.

How to export motion to video with audio..urgent

anyone can teach me how to export motion with audio?
cause i add audio when i craeting the motion...but when i export to video, there is no sound produce, only the image...
can tell me how to make it?

Make sure when you export you select the option to include audio. It seems some of the default settings do not include the audio.

MXF export with audio problems

Hi!
At the brodcast station that I work we recently upgrade to premiere CC. Our workflow are almost XDCAM files (MXF) and whe an edition is finished we export to MXF to play out or copy to XDCAM disc.
Recently I have a multi camera project and everything works perfect but when I export to an MXF file the sound as a "blank frame" in sound. The concert as an hour and twenty minutes and at the fisrt second
theres is that little "cut" in sound that doesn't exist in timeline.
I tryed various ways to export and everytime I got this frame in the same place. I also export timelines with 2 minutes from other projects, more simple, and always I got a "blank frame" somewhere in audio.
Tryed to export with 2 channels, 8 channels, stereo timeline multichannel timeline and everything result in a MXF in this audio issue.
Anyone already detect this exporting to MXFs, any sugestion to resolve this problem?

Thank you norok65 for replying this post.
I searched for some post with my problem and I didn't find so I post this one. I'm "glad" that I'm not the only one having this Kind of problem.
Like you said the problem cames with some updates. We used Premiere CS5 and no problem with MXF. We tryed the CS6 to possible update and
at the begining no problem but after some updates this problem appears and we abandoned the CS6 and we tested the CC. No problem with CC
and we did the migration. So, CC export MXFs with no problem but after some updates the audio problems came up again.
I think the problem is the updates and Adobe must fix this.
Jim, I already did some tests and exported only audio to WAV and no problem. Other formats like quictime no problem too.
This kind of problem only appears with MXF.
Like I said our workflow are almost everything in MXF (XDCAM) and we wish this issue can be solved.

Ipod Movie/Video with Audio problems

Similar Messages

Maybe you are looking for