Ipod Nano 1 gen buttons not responding

I have a Ipod Nano first gen. All the buttons and the clickwheel are not respondig. The only button that works is the hold one. The strange thing is that if i press the menu and center button to reset the ipod they work. But only in that case. I have tried to reset several times and I have tried to restore factory condition through itunes restore procedure. Nothing. Can you help me? Thanks.

Hi arondorf,
If you are still having button issues with your iPod nano after doing a full restore, you may need to have it serviced, or at least evaluated. You may find the following page helpful:
Service Answer Center - iPod
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Regards,
- Brenden

Similar Messages

  • My ipod nano touch screen is not responding please help, and i tried to hold down the volume and power button but its still not working

    ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box

    Have you double check to make sure VoiceOver and other accessibility features have not been turned on?  See this article for more information and assistance.
    iPod nano (6th generation): How to use VoiceOver
    B-rock

  • My iPod touch 5th gen does not respond properly when charging?

    Having real issues with my iPod touch 5th gen touchscreen not responding when it's on charge. Parts of the screen go dead or need several taps etc. Tried removing case etc. made sure I'm using included charger and directly to the mains not on an extension. Is it faulty?

    Some other users have reported same problem. I have not heard of a resolution. You can try:
    - Using another cable
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manuaaly changed. All updates are current.

    My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manually changed. All updates are current.

    I had this issue with my 6th generation nano.  It was driving me nuts, until I realized that somehow locked the repeat button on. Selecting one song rather than a selection will cause whatever song you have selected to play over and over and over and over..

  • My IPod Touch 4 Gen will not respond and when I try to Restore it it gives me a code 1601 how do I fix it?

    My IPod Touch 4th gen will not respond and when I try to restore it, it gives me a code 1601 how do I fix it?

    - Try another USB port.
    - Try on another computer
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

  • Ipod nano 1st gen is not recognized in itunes 10

    I updated my computer system to leopard 10.5.8 as well as the latest itunes 10. I bought a new ipod nano 6th gen, and it syncs and works fine. The problem I have is my old Ipod. It is detected by my power mac on the desktop only the icon it has is a folder, and when I open it is in blank. I open Itunes 10 and it doesn't appear. And I tried to follow the instructions on apple support, tried all ports, tried reseting the ipod, and it is still not showing up on itunes. Can someone help me with this please?
    Also, a white line showed up on the screen, does that mean the screen is broken? I can still see everything going on normally on the ipod but not where the line comes up (middle of the screen).

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • Ipod nano 6th gen is not recognized by itunes on a PC running Windows XP professional SP3, itunes 10.2

    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes (but it shows on my pc as a hard disk) weirder still, my ipod nano 3rd gen works just fine on this computer.
    Whats wrong? HELP!!!
    I have spent 3 days messing with my pc and have made no real progress.

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • IPod Nano (2nd gen.) not displaying in finder or desktop

    iPod Nano (2nd gen.) not displaying in finder or desktop BUT shows up in iTunes, it used to show up on the desktop, I don't get it
    help would be appreciated
    Thanks

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

    any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

    Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • Problems downloading audiobooks from Overdrive [Windows 8] to my IPod Nano 7th gen.  Not showing up on the Ipod. Any suggestions?

    problems downloading audiobooks from Overdrive [Windows 8] to my IPod Nano 7th gen.  Not showing up on the Ipod. Any suggestions?

    The iPod's screen indicates that the iPod is connected? 
    In Windows, the iPod will not appear as removable storage, unless it is set in iTunes to Enable disk use.  By default, it is NOT set to Enable disk use.
    In iTunes, if the sidebar (along left side of window) is hidden, from the iTunes menu bar, under View, select Show Sidebar.  When the iPod is connected, it should appear in the sidebar, under DEVICES.  It does not appear there?

  • My ipod nano 6th gen will not sync.

    My ipod nano 6th gen will not sync. I have uninstalled and reinstalled itunes; I have reset the nano; I have used a different USB port and connector; I have rebooted my computer. Any suggestions?

    I just did the same. Spent at least two hours trying different actions. Then uninstalled and reinstalled itunes. Also used a different USB port, etc. Also rebooted computer.   No option for syncing is showing up on Itunes and when I run diagnostics it says there is no device detected- yet it is plugged into a USB port and the screen on the Nano says connected. HELP

  • My ipod nano (5th gen) will not show up in my computer or in itunes, what shall i do?

    when i plug my ipod nano (5th gen) into my windows 7 laptop it makes the noise to say that it has connected with teh usb port but does not show up in my computer or itunes? i dont know what to do but have already tried the troubleshooting guide on your website...

    Does the iPod appear in device manager when you plug it in? If not, what appears there?
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

  • HT201412 My ipod touch (3rd gen) is not responding at all. It wont turn off. It wont go into sleep mode. it wont connect to the computer or anything at all. also does not responed to touch. What do i do to make it work again?

    Hi. My ipod touch (3rd gen) will not turn off or resond to anything and will not connect to a computer. the screen will not go into sleep mode and i dont know what to do. help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod nano (2nd gen) is not syncing to itunes.

    Hope someone can help.
    I have an IPOD Nano (2nd Gen) and all of a sudden i can no longer get my IPOD to sync with Itunes.
    It has worked in the past but just recently the ipod icon does not show on the source pane, when i go in to devices all items are greyed out so i can not select anything.
    Any ideas????

    Hi Thecraggs,
    Thanks for using Apple Support Communities.  If your iPod isn't recognized by your computer or iTunes, this article may help:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • My iPod Nano 6th gen will not restart?

    My iPod Nano 6th generation will not start, after being recharged, My PC doesn't recognize it and it's screen doesn't alight,
    can anyone help?
    greengra55

    If the solutions found in the article iPod not recognized in 'My Computer and in iTunes for Windows, take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you. 

Maybe you are looking for

  • How do I move my Time Machine data to another hard drive?

    I have a WD Passport 250 external that I want to move my current TM data out of, and put in my new WD My Book 1TB. I tried moving over the Backups.backupdb file directly to a new whatever partition on my 1TB drive (I have two partitions, one for TM a

  • How To Convert Multi Page Tiff Image Through open office in application

    I will Appreciate Any Effort Or Reply Which Can Tell Me , To convert a multi-page tiff image in pdf format in application i.e not on desktop using simple open -office but through coding. I doubt if there Exists Ny Plugin Or Separate Library Which Can

  • Problem about running oci demo program!

    I execute a demo program under $oracle_home/rdbms/demo,get errors: [oracle@lnx71 demo]$ ./cdemodsa ./cdemodsa: error while loading shared libraries: libclntsh.so.9.0: cannot open [oracle@lnx71 demo]$ The environment is : gcc 2.95.3 ; kernel 2.40-8. C

  • Business Rules issue

    Hi All, Please help me to resolve below issue. When my client logged in to EAS console ,she can execute Business rules successfully but after 30 mins again when she try to execute same Business rule she gets error message as *"You must be connected t

  • Applescript stopped working after Mountain Lion upgrade

    Hi after upgrading to Mountain Lion (ML) the applescript that I use to reply to certain emails has stoped working on incoming emails. I have the script in the "new" correct folder. The funny thing is that the script works when you "apply rules" from