Ipod nano 1-gen  unboxing picture

hi, can someone link me to some first gen nano unboxing pictures, i try to google it but couldnt find any.
thanks

Hi arondorf,
If you are still having button issues with your iPod nano after doing a full restore, you may need to have it serviced, or at least evaluated. You may find the following page helpful:
Service Answer Center - iPod
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Regards,
- Brenden

Similar Messages

  • IPod nano 6th gen (brand new) doesn't recognize when headphones are plugged in

    I have a brand new iPod nano (6th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted (which is not the case.. i'm absolutely sure about this) or that the headphone jack has dust inside (which is also not the case, since it is brand new).
    This is what happens:
    When i play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if i let the music play, it stops when the screen times out and turns off. These two things occur because the ipod "thinks" that there are no headphones inserted.
    When i try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
    Needless to say, the microphone and volume controls of the iphone headset, don´t work at all (they even work on the ipod shuffle!).. and because of this, no voice recording for me!
    It's a shame, because the FM radio is completely useless, and music playing only works by activating the "double click to play" option in the settings menu.. but it is somewhat cumbersome the process of "play music - turn off the screen - double click to resume playing" every time I select a song.
    The headphone detection has only worked randomly when the ipod is connected to the computer, but i haven't been able to figure out under what conditions this occurs. I have read about this issue, and I only would like to know if this is a firmware bug of the 1.2 version. I tried unsuccesfully to downgrade the firmware to the 1.1 version (maybe because the ipod shipped with the 1.2 version).
    I have also restored the device in itunes, with no luck.....
    Thanks in advance for any useful answer!

    Thanks for your answer...
    The headphones that i'm using, are the ones that were included with the iphone 4 (so, they are original).. however this shouldn't be a problem, as the ipod should work fine with whatever headphones i choose to use (sound quality will vary, of course).
    The ipod does the same with the headphones that were included in the box, and with every pair of headphones i have used to test, so i'm certain that the ipod has an issue.
    I hope that the picture is clear enough.. here you can see that the headphones are fully inserted, and the ipod is not recognizing them.

  • My ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!

    my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!

    Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
    Message was edited by: michael08081

  • Ipod nano 3rd gen.  some albums have suddenly disappeared from ipod, but they are showing as ticked on itunes library, have bought more tracks since on itunes and they are showing, any help please

    ipod nano 3rd gen - tracks (whole albums) have disappeared from ipod but are showing ticked in itunes library and ipod is synched, have bought tracks from itunes since this happened and they are fine, any help please

    You may have transferred all your songs, but your iPad is seeing the library as a different entity.
    The following article(s) may help you.
    Moving your iTunes library to a new computer  

  • After upgrade to Windows 8.1, ipod nano 7th gen not recognized

    /after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen.  I have uninstalled and reinstalled ITunes but no luck.  I have gone through all steps in troubleshooting, but it still doesn't recognize it.  Help!

    Hi cindywindy,
    If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • I need to get the music off my Ipod Nano 2nd GEN onto either ITunes or in a music foldes on my new computer. Not all the music was purchased from Apple Itunes HOW DO I DO THIS WITHOUT LOOSING ALL MY MUSIC??

    I have not had a computer for several years and I just got a new one. My old computer got a virus and when that happened all my music was lost. Thank goodness I had it all on my Ipod Nano 2nd GEN. Now my problem is that I don't know how to get the music off my Ipod Nano onto my new computer!!! I was able to get the songs that I purchased thru ITunes by just authorizing my new computer. But I have alot more music that is on my Ipod nano that I can't put into my ITunes library. In fact, I can't even get my music into a file folder on my computer!! I really need help. I don't have any copies of the music anywhere else and some of it is hard to get. How do I get my music either into ITunes or into a file folder on my new computer or even if I could get my computer to recognize my Ipod and sync all the music into windows media or something like that. Every time I connect my IPod all that happens is that it tells me if I sync the IPod that it will replace all the music from my ITunes library on to my IPod. And I am guessing that means all my music on the IPod will be erased. PLEASE HELP ME!!!! Thanks from the bottom of my songsters heart

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • My ipod nano (5th gen) will not show up in my computer or in itunes, what shall i do?

    when i plug my ipod nano (5th gen) into my windows 7 laptop it makes the noise to say that it has connected with teh usb port but does not show up in my computer or itunes? i dont know what to do but have already tried the troubleshooting guide on your website...

    Does the iPod appear in device manager when you plug it in? If not, what appears there?
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

  • I recently purchased a bluetooth headphone set that I have been able to pair to my iphone6 , but it is not showing up on my ipod nano 7th gen, anyone else had a similar problem ?

    anyone had trouble syncing a bluetooth headset to an ipod nano 7th gen ? I was able to sync to my iphone6 , but no luck with the ipod, even after a reset & several attempts

    THanks for the suggestion deggie , but I have already tried this without any success. I just mentioned pairing it to prove that the headphones weren't defective. I also tried reaeting the ipod through itunes hoping that might help , but still no detection on the ipod

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

    Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

    Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
    B-rock

  • I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

    I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

    See:
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

  • My ipod nano (6th gen) keeps connecting and disconnecting itself from my computer can anyone help?

    I have read numerous posts online about the same problem but can't seem to sort mine out. I've tried changing power leads, restoring back till an older version of itunes, resetting the ipod, restarting my computer and tried every USB port in sight but still nothing.
    I have plugged a friends ipod touch into my computer and it connects and appears in itunes fine, but with mine it wont stay connected long enough for me to try and restore anything with it on itunes its literally a 1 second interval between connected and ejecting. I thought maybe it could be the connection terminal on the ipod but i have had it connected to a wall charger and xbox with it staying connected with no problems.
    I am running windows vista on the computer and the nano was previously synced to a different itunes could this be the problem and if so how do I go about fixing it??
    Thanks

    I too am having this same issue. I connect my iPod nano (6th gen), and it appears for anywhere between 1 to 10 seconds and then automatically ejects.
    I'm running a macbook pro with OS X 10.6.8 and the most up to date version of iTunes. The strange thing is that the nano works fine on my old macbook from 2007; which also has the most up to date iTunes but is running OS X 10.5. Another thing is that my iPod touch works just perfectly on my MacBook Pro.
    I have read up on a lot of forums, and have found little help for those who are running into this problem on a Mac. The majority of fixes are for PC. Any help would be greatly appreciated.

  • My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes

    I'm tring to convert video from Youtube to play on my ipod nano 3rd gen.  When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
    What do I do?  I tried Real player converter too - no luck.

    I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
    B-rock

  • My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

    My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

    Read the PDF user manual for a possible solution:  iPod Manuals and/or iPod Nano Support 
    Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. 
    If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

  • HT1373 I bought an ipod nano 5th gen and it came with 900 songs on it. How can i retain the music before i authorize this unit to my itunes account? It says it will erase all content once I sync with my imac7. Is there anyway to keep the music??? please h

    I bought a used ipod nano 5th gen and it came with 900 songs on it. How can i transfer, sync, and retain the music before i authorize this unit to my itunes account? It says it will erase all content once I sync with my imac7. Is there anyway to keep the music??? please help!!
    Thanks,
    Aaron

    The music does not belong to you.  You have no legal right to it and there is no way to keep it.
    Sorry

Maybe you are looking for

  • How to make sure that two VC Ethernet modules are redundants

    Hi , we have a blade  encluser has 16 servers and two ethernet module each ethernet  port is configured as a single SUS , So if one of module is failed  we are expected we will lost network connectivity of these ports I read many senarios  but all de

  • OS command  in Communication channel to change property of file...

    Hi All Can anybody let me know the OS command (to be written in command line prompt in receiver file channel) to change the property of a file written on Application server. A file is getting written on PI application server by a communication channe

  • Sending a csv file using OS command

    Hi all, I would like to know whether it is possible to send CSV file stored in application server to some email ids using OS Command process type.Using APD a file will be generated at a particular application server path.That file around 2 MB needs t

  • Excise register balance update

    Sir,      Our client uses FI JV for excise duty utilization instead of standard transaction J2IUN. As a result the balance in Ex registers RG23A/C part 2 is showing excess amount than actual. Part 1 register is updated through J1I5. How to correct ba

  • How do I get JavaForOSX2014-0 to work?

    how do I get JavaForOSX2014-0 to work?