IPod Nano (2nd gen.) not displaying in finder or desktop

iPod Nano (2nd gen.) not displaying in finder or desktop BUT shows up in iTunes, it used to show up on the desktop, I don't get it
help would be appreciated
Thanks

Have the same issue but with latest iPod nano 7 Gen, second day trying

Similar Messages

  • IPod Nano 2nd Gen showing up in Finder, but not in iTunes.

    I've done all the troubleshooting @: https://www.apple.com/ca/support/ipodnano/assistant/itunes/

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • New ipod nano 2nd gen. not loading onto windows or itunes

    I just got an ipod nano 2gb 2nd gen. (refurbished from apple). I updated my former version of itunes (my daughter has a 1st gen. nano, so she's been using itunes with her's with no problems..) to the latest version like the quick start guide says. Plugged in the ipod to the usb port on the back of the computer and the setup wizard pops up, asking to install the software for the device. I try letting it auto search, which it finds nothing, and I get a message saying "your new hardware may not work properly.....". I checked the device manager and the ipod is listed under "other devices" with a question mark by it. I checked to make sure my daughters 1st gen. nano works with the updated itunes and it does with no problems. Now what?
    Ipod Nano 2gb 2nd gen.   Windows XP  
    Dell Dimension 4600   Windows XP  

    I also have a 2nd generation, which I purchased after my ipod Shuffle stopped updating. We plugged it in, followed the instructions but the Nano was not recognised by my PC, however, my nano does get recognised on my husband's pc. My daughters ipod and my old shuffle both are still recognised on my pc. I need to delete the shuffle, as it is faulty, but more importantly, I need to get my pc to recognise the nano. Please help.

  • TS1538 ipod nano 2nd gen not recognized

    I tried following all the trouble shooting step
    update, reinstall, reset,restart, boot in disk mode, check cable, check usb port, turn on apple mobile driver, restart driver....
    nothing seems to work, anyone have ideas?

    Thank you for that.
    If your computer is windows:
    xp- it needs service pack 3
    vista- service pack 2
    7- n/a
    How to check:
    Click the start button, right click computer or my computer, select properties
    -In the general info section is where it will tell you what the service pack is.
    To update if needed use this:
    xp: http://support.microsoft.com/kb/322389
    vista: http://support.microsoft.com/kb/935791
    After that check for update in itunes:
    -click help at the top
    -click check for updates
    If your ipod is still not seen in itunes try this:
    http://support.apple.com/kb/TS1369
    Sometimes Security Software gets in the way of the iPod's drivers being installed correctly for that try this:
    http://support.apple.com/kb/TS3125
    You can always test your ipod on a different 'known good' computer to rule out the iPod as having the issue. If iPod shows good on a different computer in itunes then you know is your computer. If iPod does not show in the other computer's iTunes you know its your iPod.
    If it is your ipod then you will need a service: https://selfsolve.apple.com/GetWarranty.do or call 1800 MY APPLE to set it up.
    I know thats a lot, but sincerely hope it helps.
    ~Julian
    p.s Your iPod looks like a 4th gen nano

  • I need to get the music off my Ipod Nano 2nd GEN onto either ITunes or in a music foldes on my new computer. Not all the music was purchased from Apple Itunes HOW DO I DO THIS WITHOUT LOOSING ALL MY MUSIC??

    I have not had a computer for several years and I just got a new one. My old computer got a virus and when that happened all my music was lost. Thank goodness I had it all on my Ipod Nano 2nd GEN. Now my problem is that I don't know how to get the music off my Ipod Nano onto my new computer!!! I was able to get the songs that I purchased thru ITunes by just authorizing my new computer. But I have alot more music that is on my Ipod nano that I can't put into my ITunes library. In fact, I can't even get my music into a file folder on my computer!! I really need help. I don't have any copies of the music anywhere else and some of it is hard to get. How do I get my music either into ITunes or into a file folder on my new computer or even if I could get my computer to recognize my Ipod and sync all the music into windows media or something like that. Every time I connect my IPod all that happens is that it tells me if I sync the IPod that it will replace all the music from my ITunes library on to my IPod. And I am guessing that means all my music on the IPod will be erased. PLEASE HELP ME!!!! Thanks from the bottom of my songsters heart

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My ipod nano (2nd gen) is not syncing to itunes.

    Hope someone can help.
    I have an IPOD Nano (2nd Gen) and all of a sudden i can no longer get my IPOD to sync with Itunes.
    It has worked in the past but just recently the ipod icon does not show on the source pane, when i go in to devices all items are greyed out so i can not select anything.
    Any ideas????

    Hi Thecraggs,
    Thanks for using Apple Support Communities.  If your iPod isn't recognized by your computer or iTunes, this article may help:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off. I recharged and reset. What else should I do?

    My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off.
    It disappears when turned on. It must mean something. I recharged and reset. What else, if anything, should I do?

    You can work through the remaining five 5 R's of troubleshooting.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • Ipod nano 2nd gen and dock/alarm clock

    i have read through alot of the posts and have not seen anything similar to my question.
    i got my daughter an ipod nano for xmas.
    we really dont leave the computer on alot and she was wanting a docking station/speaker setup. i found one that charges it/ has speakers and is also an alarm clock.
    she likes the idea of having the alarm clock with it.
    this is the model she got: curtis iMode ip210 link to where it was bought http://hhgregg.com/ProductDetail.asp?SID=0B568914D18A4CBEB2E80A95E8C46043&Produc tID=17180
    we have not hooked it up yet because of a small problem maybe. (hooked up to power that is)
    it came with a bunch of different adapters for the different ipod versions. well the nano one is incorrect. i guess due to ours being a 2nd gen version.
    the ipod goes right on the dock fine with out it.
    the little plastic adapter i got with the ipod kinda works in the slot of the radio but would need a little modification to snap in. the difference is the outside shape and would just needed some sanding. i have called the support number for the radio and all i could get from the was its not compatable. and i am not too sure why.
    from what i have found out is all the ipod dock connectors are the same and there is no difference. not sure about this just what i have noticed.
    i tried to call my local apple store and ask them but that guy started talking about firewire and problems. i told him how it docked and what it was and he still insisted on talking about firewire and those problems. i hung up as it didnt sound like he knew anything.
    so now would i be ok in useing the adapter i got with the ipod and makeing some slight mods(sanding outside edge) to it. or is the something totally different between the 1st gen and 2nd gen that would mess up the ipod if put in this unit.
    the reason i want this unit as it will replace her current alarm clock and she has a loft bed and its the only unit that we have seen that will fit and is in our price range.
    thank you for your help
    dawg
    ipod nano 2nd gen   Windows XP  

    The dock adaptor that came with the iPod is meant to fit Apple's universal dock and not a 3rd party accessory.
    The reason you are having issues is because although the dock connectors on iPods are all the same (the pins are in the same place), the connector on the second gen nano is in a slightly different place than on the first. If you look at it from the bottom with the iPod face up, it's slightly more to the left. This, and the fact that it has a metal case with rounded edges, has made the new nano incompatible with almost all these type of accessories.
    It's been mentioned here several times, and a few people have been able to get the manufacturer of the dock to supply them with an adaptor.

  • ITunes and my PC won't recognize my iPod Nano (2nd gen.)

    Just this morning, my iPod nano (2nd gen.) stopped getting recognized in my iTunes and on my computer hard drive. It still charges when it's plugged into the computer, but the device is not recognized otherwise. What is going on?? Thanks!

    p.s. I also connected it to my husband's laptop and his iTunes wouldn't recognize the device either (if that helps).

  • Itunes won't recognize my ipod nano 2nd gen anymore?

    itunes won't recognize my ipod nano 2nd gen anymore. it just charges it???

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My computer doesn't recognize my ipod nano 2nd gen

    My computer running Windows 7 doesn't recognize my ipod nano 2nd gen.  Also my ipod not seen in my itunes.  I did all the reset stuff and nothing works.  Do you think it is just shot???

    Make sure you have the latest version of iTunes. Are you a Mac or PC user?
    Hm so have you also tried completely erasing your iPod?

  • Itunes won't recognize ipod nano 2nd gen

    hi everyone,
    I have a mac powerpc g4 and am running osx 10.3.2 and itunes 6.0.4. as far as I know, that's the latest itunes that will work with this os. I can plug in my own ipod (an old 40 gb) and everything's great. the problem is when my fiance plugs in hers -- she wants to load some of my mp3s onto her ipod. it shows up as an ipod on the desktop, but itunes doesn't recognize it. I tried the 5 R's already -- I even restored her ipod nano 2nd gen and made sure it was in mac format and had the latest software, which it now does. but it makes no difference. her own itunes/mac recognizes her ipod just fine; the problem is when we plug it into my mac. I suspect I need some different, updated driver that will explain to my mac that the thing that's being plugged in needs to be treated like an ipod. any ideas where I can find such a driver that would work with my os, or, failing that, any ideas as to anything else that would fix the problem? any help is much appreciated.
    thanks,
    John

    My IPod Nano will charge when connected to my computer but it won't come up on My Computer or iTunes. So I can't update the songs. I've already tried reseting the iPod. Does anybody know what I can do to fix it.

  • Ipod nano 2nd gen

    ipod nano 2nd gen will not connect to my computer or itunes but when plug in the usb it charges it

    Hello there, Stevo002.
    The following Knowledge Base article offers up some great information for troubleshooting the issue you are describing:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do i readjust the right and left speaker in iPod nano 2nd gen.

    How do i readjust the right and left speaker in iPod nano 2nd gen.

    Are you playing a song in iTunes that listed in contents of iPod while it is connected. Try going to your music lib and play a song and disconnect your iPod.
    Also, make sure you are not located in some sub dir that utililizes iTunes.
    You can also hit 'ctrl,alt,delete' to see what applications are running on your PC.

Maybe you are looking for

  • SELECT-OPTIONS Values via DYNP_VALUES_READ in a Search Help Exit

    Hi all, I appended a standard search help of a standard report with a search help of my own. Now I am trying to retrieve the values the user has entered into the selection screen of the report using the FM DYNP_VALUES_READ in my search help exit FM.

  • AO+ 2 counter tasks of PCI-6110

    Hello I'm trying to get synchronized analog output task and pulse counting of two counters using PCI-6110, meaning generate an AO signal first then count incoming pulses at two different counters simultaneously. After searching this forum and testing

  • TREX 7.0 System AIX 5.3 DB2 Error FCO-00011  The step extractTrexBinaries

    Hi Colleagues, In the process 6 of 12 the installation the trex stopped with this error, FCO-00011  The step extractTrexBinaries with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|TREX_BINARY_INST|ind|ind|TREX|ind|4|0

  • JDevelopere 10.1.3.1 ESB Modeler issue

    I am getting no attached graph model or graph model is null while modeling a simple ESB System flow. I just dragged the Adapter service from palette and configured the new adapter service. The <project>.esb file is blank and I noticed below message i

  • Insert Date Time

    db = XE I have imported the exif data from some images into an oracle table. I now want to insert the data into some other tables. I am having difficulty with the date and time data. The exif export contains the date and time like this; 2011:11:30 18