IPod Nano 2nd Gen showing up in Finder, but not in iTunes.

I've done all the troubleshooting @: https://www.apple.com/ca/support/ipodnano/assistant/itunes/

Have the same issue but with latest iPod nano 7 Gen, second day trying

Similar Messages

  • 2. gen iPod nano sometimes shows up in Finder, but not in iTunes

    Hi!
    My brand new 8GB iPod nano that I got for christmas sometimes seems to have problems connecting to iTunes. Every now and then (perhaps 1/4 of the time?) it will show up in Finder, but not in iTunes (I haven't enabled "disk mode" yet, so when it shows up in iTunes, it is not visible in Finder). Also, on one or two occasions, it showed up in iTunes, but wasn't recognized.
    Whenever this happens, I just eject the iPod from Finder and disconnect it, and on the second try (on one occasion - third try) it will show up in Finder.
    What could this be? Bad connectors/cable - or iTunes just not very reliable?
    MBP 15" C2D 15" 2.33/2/160 - MB (white) 2/2/120 - PBG4 12" 1.33/1.25/60   Mac OS X (10.4.8)  

    These problems return every now and then.
    In addition, if the iPod is connected, is shown in iTunes and has already synced properly, it will sometimes reset if I try an additional manual sync from the File menu. It's a rather benign error, since it will connect and sync as soon as the iPod has restarted.
    I also had one freeze of the iPod while playing.
    This is my first iPod, and I'm used to computers that run for months or years without a reboot. Is it just normal for an iPod to freeze/reset every now and then? My Nokia phone does it too, but then I expect more from Apple...

  • IPod Nano (5th gen, 16GB) syncing some albums, but not others...?

    Hello! I am new to the world of iPods, so please bear with me.
    I recently purchased an iPod Nano (5th gen, 16GB) and figured out how to sync it with iTunes. Unfortunately, it seems to only sync up with select albums in my library. I know that in order for an album to sync there needs to be check marks next to each song, which I did, but after I sync it I browse my iPod and find that only (roughly) half of the albums I indicated actually show up on my iPod. For example, I was able to sync albums by The Afghan Whigs, Bryan Ferry, and Berlin just fine, but for some reason I was not able to sync certain albums by Autechre, Low, or King Black Acid.
    What gives?? I will note that I am using the Windows 7 release candidate - hopefully this has nothing to do with it.

    Hello livoryy
    It sounds like the battery just does not hold a charge. Check out the page below and look at the battery replacement section to get all the answers to what you are asking.
    Service Answer Center – iPod
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    Regards,
    -Norm G.

  • New MPB - iPod shows up in Finder but not in iTunes. Help please!

    I just completed a 95% successfull migration from my old MPB to my new MPB. iTunes seems to work fine, sees all my music and I have authorized the new mac to play the music.
    However, when I connect either of my two ipods I get the same result - it does not show up in iTunes but immediately shows up in Finder. Given the same thing happens with both ipods I suspect there is some silly little setting I have to go through. Can anybody help please?
    The MBP is a brand new 13" with the smaller processor. The iPods are a 2nd generation 40Gb and the 120Gb Classic.

    So I ended up reinstalling iTunes. That almost solved it, but when I also restored the iPods it seems to be OK.
    Must say I'm disappointed that a brand new Mac behaves this way (and ironically it did not even have the latest software installed...).

  • 2nd gen shuffle seen by windows, but not by itunes on other computers

    Hi Everyone..
    Im trying to help a friend out, I suspect his 2nd gen shuffle is hosed, but thought I'd confirm with others.
    He's had itunes and this shuffle for a while.. worked ok.  Stored it for a year or so, and now found that when we plug it into his laptop, Windows XP will see it as a usb drive (and I can transfer files onto it as a flash drive), but itunes doesnt see it.
    In mucking around with it for some time, I finally installed a fresh copy of Itunes over the existing one and when it restarted I was told the shuffle was in Recovery mode.. so I reset it from within itunes.  Upon restarting, itunes again doesnt see it.  I then downloaded the reset utility and tried that, again, doesnt see it.
    I installed itunes on my win7 desktop, my wifes 1st gen ipod touch is seen a-ok, but my friends shuffle is not.. again, I can use it as a flash drive on the win7 computer, but itunes does nothing.
    Is the shuffle toast?
    thanks,
    cakes..

    Not looking good if you ask me especially since the problem was persistent across two different PCs and the reset utility did not help.
    B-rock

  • IPod Nano (2nd gen.) not displaying in finder or desktop

    iPod Nano (2nd gen.) not displaying in finder or desktop BUT shows up in iTunes, it used to show up on the desktop, I don't get it
    help would be appreciated
    Thanks

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • My ipod nano 2nd gen is showing the apple?support sceen...What do i do?

    my ipod nano 2nd gen is showing the apple?support sceen...What do i do?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • Itunes won't recognize ipod nano 2nd gen

    hi everyone,
    I have a mac powerpc g4 and am running osx 10.3.2 and itunes 6.0.4. as far as I know, that's the latest itunes that will work with this os. I can plug in my own ipod (an old 40 gb) and everything's great. the problem is when my fiance plugs in hers -- she wants to load some of my mp3s onto her ipod. it shows up as an ipod on the desktop, but itunes doesn't recognize it. I tried the 5 R's already -- I even restored her ipod nano 2nd gen and made sure it was in mac format and had the latest software, which it now does. but it makes no difference. her own itunes/mac recognizes her ipod just fine; the problem is when we plug it into my mac. I suspect I need some different, updated driver that will explain to my mac that the thing that's being plugged in needs to be treated like an ipod. any ideas where I can find such a driver that would work with my os, or, failing that, any ideas as to anything else that would fix the problem? any help is much appreciated.
    thanks,
    John

    My IPod Nano will charge when connected to my computer but it won't come up on My Computer or iTunes. So I can't update the songs. I've already tried reseting the iPod. Does anybody know what I can do to fix it.

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My ipod nano (2nd gen) is not syncing to itunes.

    Hope someone can help.
    I have an IPOD Nano (2nd Gen) and all of a sudden i can no longer get my IPOD to sync with Itunes.
    It has worked in the past but just recently the ipod icon does not show on the source pane, when i go in to devices all items are greyed out so i can not select anything.
    Any ideas????

    Hi Thecraggs,
    Thanks for using Apple Support Communities.  If your iPod isn't recognized by your computer or iTunes, this article may help:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • I can see my ipod nano 2nd generation under finder but not under itunes.

    I can see my ipod noano 2nd generation under finder but not under itunes. I can't upgrade the music on the ipod nano if itunes doesn't show it. How can't I fix this problem?

    See this article first.
    http://support.apple.com/kb/TS1461
    If still no luck, try a low level format of the iPod using Disk Utility and the instructions provided in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • I need to get the music off my Ipod Nano 2nd GEN onto either ITunes or in a music foldes on my new computer. Not all the music was purchased from Apple Itunes HOW DO I DO THIS WITHOUT LOOSING ALL MY MUSIC??

    I have not had a computer for several years and I just got a new one. My old computer got a virus and when that happened all my music was lost. Thank goodness I had it all on my Ipod Nano 2nd GEN. Now my problem is that I don't know how to get the music off my Ipod Nano onto my new computer!!! I was able to get the songs that I purchased thru ITunes by just authorizing my new computer. But I have alot more music that is on my Ipod nano that I can't put into my ITunes library. In fact, I can't even get my music into a file folder on my computer!! I really need help. I don't have any copies of the music anywhere else and some of it is hard to get. How do I get my music either into ITunes or into a file folder on my new computer or even if I could get my computer to recognize my Ipod and sync all the music into windows media or something like that. Every time I connect my IPod all that happens is that it tells me if I sync the IPod that it will replace all the music from my ITunes library on to my IPod. And I am guessing that means all my music on the IPod will be erased. PLEASE HELP ME!!!! Thanks from the bottom of my songsters heart

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • Ipod nano 2nd gen and dock/alarm clock

    i have read through alot of the posts and have not seen anything similar to my question.
    i got my daughter an ipod nano for xmas.
    we really dont leave the computer on alot and she was wanting a docking station/speaker setup. i found one that charges it/ has speakers and is also an alarm clock.
    she likes the idea of having the alarm clock with it.
    this is the model she got: curtis iMode ip210 link to where it was bought http://hhgregg.com/ProductDetail.asp?SID=0B568914D18A4CBEB2E80A95E8C46043&Produc tID=17180
    we have not hooked it up yet because of a small problem maybe. (hooked up to power that is)
    it came with a bunch of different adapters for the different ipod versions. well the nano one is incorrect. i guess due to ours being a 2nd gen version.
    the ipod goes right on the dock fine with out it.
    the little plastic adapter i got with the ipod kinda works in the slot of the radio but would need a little modification to snap in. the difference is the outside shape and would just needed some sanding. i have called the support number for the radio and all i could get from the was its not compatable. and i am not too sure why.
    from what i have found out is all the ipod dock connectors are the same and there is no difference. not sure about this just what i have noticed.
    i tried to call my local apple store and ask them but that guy started talking about firewire and problems. i told him how it docked and what it was and he still insisted on talking about firewire and those problems. i hung up as it didnt sound like he knew anything.
    so now would i be ok in useing the adapter i got with the ipod and makeing some slight mods(sanding outside edge) to it. or is the something totally different between the 1st gen and 2nd gen that would mess up the ipod if put in this unit.
    the reason i want this unit as it will replace her current alarm clock and she has a loft bed and its the only unit that we have seen that will fit and is in our price range.
    thank you for your help
    dawg
    ipod nano 2nd gen   Windows XP  

    The dock adaptor that came with the iPod is meant to fit Apple's universal dock and not a 3rd party accessory.
    The reason you are having issues is because although the dock connectors on iPods are all the same (the pins are in the same place), the connector on the second gen nano is in a slightly different place than on the first. If you look at it from the bottom with the iPod face up, it's slightly more to the left. This, and the fact that it has a metal case with rounded edges, has made the new nano incompatible with almost all these type of accessories.
    It's been mentioned here several times, and a few people have been able to get the manufacturer of the dock to supply them with an adaptor.

  • ITunes and my PC won't recognize my iPod Nano (2nd gen.)

    Just this morning, my iPod nano (2nd gen.) stopped getting recognized in my iTunes and on my computer hard drive. It still charges when it's plugged into the computer, but the device is not recognized otherwise. What is going on?? Thanks!

    p.s. I also connected it to my husband's laptop and his iTunes wouldn't recognize the device either (if that helps).

  • Itunes won't recognize my ipod nano 2nd gen anymore?

    itunes won't recognize my ipod nano 2nd gen anymore. it just charges it???

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

Maybe you are looking for

  • How can i recover files from iphone 3gs 4.2.1 while in recovery mode ?

    I had tried already multiple ways to get it off recovery mode but nothing works...it went into recovery mode while it was charging :( .. I REALLY DON'T WANT TO LOOSE MY DATA because just a couple of weeks ago my dad deleted EVERYTHING from our comput

  • ORA-01461: can bind a LONG value only for insert into a LONG column

    Good Afternoon, I was just wiondering if my issue is database related rather SQL related, because my process works and the code has not been updated for sometime. I receive the above error when tryig to insert into a table. I running Oracle 11g. here

  • Shuffle doesn't get along with other USB drives

    Okay, so I purchased a new iPod Shuffle, and upon connecting it to my computer and installing all the software, I nearly had a heart attack. According to Windows Explorer, all my data on my 80 gig USB hard drive and my 1 gig flash drive had been eras

  • Custom function call results in 403 Forbidden error

    Hi, I use an custom function to show images from blob columns in a report (as shown in Re: How to Display image, that is stored in database This run fine with Apex 2.2. After a new installation on an other server - now with Apex 3.1 - everything is o

  • Invoice Split due to different incoterms 2

    Hello SD experts.. Kindly advise on the following situation. we are making supplemetary invoice with  ref of invoice which could be more than one sometimes. Further more in first invoice we have put incoterm 2 as a BY ROAD. In 2nd inovice we have put