IPod Nano 2nd Gen Sound worse than 1st gen

Hi, i got a nano 2gen and the sound is not satisfactory to me. Especially the bass is not strong enough. Heard about other nano 2g user having the same problem. I'm using the Firmware 1.1.1. Heard that the firmware 1.1 sounded better!
Will there be another upgrade improving the sound?

The iPod eq is, in my opinion, trash and I never use it.
I have no wish to be told that the frequency settings for "rock" for instance is how I should be listening to rock music. Those settings are only the opinion of whoever made that preset in the first place.
This is a very subjective issue however, and I appreciate that some like to use the preset eq. One person's audio nirvana would most likely have others reaching for the off switch! Ask yourself why many high quality audio amps don't even have tone controls.
The eq on devices such as the iPod is low quality, and as someone who works in the recording industry, I can tell you that it's only when you have an eq device costing many $/£/€ (such as a SoundCraft mixing console) does it produce anything other than a nasty effect.
If there's going to be any eq on a device such as the iPod, it ought to be at the very least user definable.
Each to his own though. : )

Similar Messages

  • Reception Signal Strength Quality worse than 1st Gen

    At home, I get worse reception on my 3G iPhone than my 1st Gen iPhone. Is it just my phone or one of ATT's towers went down? Or did I just get a defective iPhone 3G? If anyone else has noticed this difference I would like to know.
    Thanks.

    Same here. I know I live in an area where the signal is very strong ("best", according to AT&T), and my Sprint phone had full-strength here. My roommates have no problems, either.
    However, with my new iPhone 3G, the bars are usually almost flat. If I turn 3G off, sometimes I get a better signal (at least according to the "bars") but I shouldn't have to do that.
    I'm sitting right next to a window and it's almost flatlined. I walk around the house or drive around and it keeps changing....but full strength? I don't think I've seen it yet.
    I'm really hoping this gets fixed asap, particularly if the bar graphic is an accurate reflection of the actual signal strength being received....because if not, I'm going to have to give up my iPhone, and I've been waiting over a YEAR to have this phone.

  • IPod nano 2nd generation sound check bug

    Every time I sync my 2nd generation 4Gb iPod nano with my computer to add songs to it, the sound check option becomes turned off, but it says it is still on. My iPod software is the latest version (1.1.3). Sound Check is turned on in iTunes, and I had it turned on in my iPod's settings menu before syncing. Turning it off and back on in the settings on the iPod after syncing re-enables sound check, but it turns back off every time I sync. I have also tried resetting and restoring the iPod nano, but it still has this problem. A third generation iPod nano used on the same computer doesn't have this problem. Is this a bug, or am I doing something wrong when syncing (auto sync, disk use enabled)?

    This problem is also happening with my ipod, except the sound check function doesn't even work! My brother in product design says it could be a problem with the volume control chip in the ipod.

  • Ipod nano 2nd gen and dock/alarm clock

    i have read through alot of the posts and have not seen anything similar to my question.
    i got my daughter an ipod nano for xmas.
    we really dont leave the computer on alot and she was wanting a docking station/speaker setup. i found one that charges it/ has speakers and is also an alarm clock.
    she likes the idea of having the alarm clock with it.
    this is the model she got: curtis iMode ip210 link to where it was bought http://hhgregg.com/ProductDetail.asp?SID=0B568914D18A4CBEB2E80A95E8C46043&Produc tID=17180
    we have not hooked it up yet because of a small problem maybe. (hooked up to power that is)
    it came with a bunch of different adapters for the different ipod versions. well the nano one is incorrect. i guess due to ours being a 2nd gen version.
    the ipod goes right on the dock fine with out it.
    the little plastic adapter i got with the ipod kinda works in the slot of the radio but would need a little modification to snap in. the difference is the outside shape and would just needed some sanding. i have called the support number for the radio and all i could get from the was its not compatable. and i am not too sure why.
    from what i have found out is all the ipod dock connectors are the same and there is no difference. not sure about this just what i have noticed.
    i tried to call my local apple store and ask them but that guy started talking about firewire and problems. i told him how it docked and what it was and he still insisted on talking about firewire and those problems. i hung up as it didnt sound like he knew anything.
    so now would i be ok in useing the adapter i got with the ipod and makeing some slight mods(sanding outside edge) to it. or is the something totally different between the 1st gen and 2nd gen that would mess up the ipod if put in this unit.
    the reason i want this unit as it will replace her current alarm clock and she has a loft bed and its the only unit that we have seen that will fit and is in our price range.
    thank you for your help
    dawg
    ipod nano 2nd gen   Windows XP  

    The dock adaptor that came with the iPod is meant to fit Apple's universal dock and not a 3rd party accessory.
    The reason you are having issues is because although the dock connectors on iPods are all the same (the pins are in the same place), the connector on the second gen nano is in a slightly different place than on the first. If you look at it from the bottom with the iPod face up, it's slightly more to the left. This, and the fact that it has a metal case with rounded edges, has made the new nano incompatible with almost all these type of accessories.
    It's been mentioned here several times, and a few people have been able to get the manufacturer of the dock to supply them with an adaptor.

  • Charging iPod nano (2nd gen) with iPod mini adaptor

    Hey
    I just bought my iPod nano 2nd gen, and I realized that there is no wall charger for it. Therefore I am wondering, if I can use the wallcharger for my old iPod mini?
    I that cannot be done, I would like some alternatives, since I would like to bring my iPod on vacation, and therefore I need more than 24 hours of battery life.
    Best regards
    Niels Christian

    " I am wondering, if I can use the wallcharger for my old iPod mini?"
    Yes.

  • TS1591 How do I get Itunes 11.0 to recognize my IPOD Nano 2nd gen

    How do I get Itunes 11.o to recognize my Ipod Nano 2nd gen

    Same question here with iPod nano 1st gen and 3rd gen. They all stopped working with the iTunes 11 upgrade.

  • Is there any update for iPod nano 2nd gen?

    Is there any update (newer than 1.1.1) for iPod nano 2nd gen?

    No one knows. They are released at irregular intervals whenever Apple feels the need.

  • I need to get the music off my Ipod Nano 2nd GEN onto either ITunes or in a music foldes on my new computer. Not all the music was purchased from Apple Itunes HOW DO I DO THIS WITHOUT LOOSING ALL MY MUSIC??

    I have not had a computer for several years and I just got a new one. My old computer got a virus and when that happened all my music was lost. Thank goodness I had it all on my Ipod Nano 2nd GEN. Now my problem is that I don't know how to get the music off my Ipod Nano onto my new computer!!! I was able to get the songs that I purchased thru ITunes by just authorizing my new computer. But I have alot more music that is on my Ipod nano that I can't put into my ITunes library. In fact, I can't even get my music into a file folder on my computer!! I really need help. I don't have any copies of the music anywhere else and some of it is hard to get. How do I get my music either into ITunes or into a file folder on my new computer or even if I could get my computer to recognize my Ipod and sync all the music into windows media or something like that. Every time I connect my IPod all that happens is that it tells me if I sync the IPod that it will replace all the music from my ITunes library on to my IPod. And I am guessing that means all my music on the IPod will be erased. PLEASE HELP ME!!!! Thanks from the bottom of my songsters heart

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • IPod Nano (2nd gen.) not displaying in finder or desktop

    iPod Nano (2nd gen.) not displaying in finder or desktop BUT shows up in iTunes, it used to show up on the desktop, I don't get it
    help would be appreciated
    Thanks

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • ITunes and my PC won't recognize my iPod Nano (2nd gen.)

    Just this morning, my iPod nano (2nd gen.) stopped getting recognized in my iTunes and on my computer hard drive. It still charges when it's plugged into the computer, but the device is not recognized otherwise. What is going on?? Thanks!

    p.s. I also connected it to my husband's laptop and his iTunes wouldn't recognize the device either (if that helps).

  • Itunes won't recognize my ipod nano 2nd gen anymore?

    itunes won't recognize my ipod nano 2nd gen anymore. it just charges it???

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My computer doesn't recognize my ipod nano 2nd gen

    My computer running Windows 7 doesn't recognize my ipod nano 2nd gen.  Also my ipod not seen in my itunes.  I did all the reset stuff and nothing works.  Do you think it is just shot???

    Make sure you have the latest version of iTunes. Are you a Mac or PC user?
    Hm so have you also tried completely erasing your iPod?

  • Itunes won't recognize ipod nano 2nd gen

    hi everyone,
    I have a mac powerpc g4 and am running osx 10.3.2 and itunes 6.0.4. as far as I know, that's the latest itunes that will work with this os. I can plug in my own ipod (an old 40 gb) and everything's great. the problem is when my fiance plugs in hers -- she wants to load some of my mp3s onto her ipod. it shows up as an ipod on the desktop, but itunes doesn't recognize it. I tried the 5 R's already -- I even restored her ipod nano 2nd gen and made sure it was in mac format and had the latest software, which it now does. but it makes no difference. her own itunes/mac recognizes her ipod just fine; the problem is when we plug it into my mac. I suspect I need some different, updated driver that will explain to my mac that the thing that's being plugged in needs to be treated like an ipod. any ideas where I can find such a driver that would work with my os, or, failing that, any ideas as to anything else that would fix the problem? any help is much appreciated.
    thanks,
    John

    My IPod Nano will charge when connected to my computer but it won't come up on My Computer or iTunes. So I can't update the songs. I've already tried reseting the iPod. Does anybody know what I can do to fix it.

  • My ipod nano (2nd gen) is not syncing to itunes.

    Hope someone can help.
    I have an IPOD Nano (2nd Gen) and all of a sudden i can no longer get my IPOD to sync with Itunes.
    It has worked in the past but just recently the ipod icon does not show on the source pane, when i go in to devices all items are greyed out so i can not select anything.
    Any ideas????

    Hi Thecraggs,
    Thanks for using Apple Support Communities.  If your iPod isn't recognized by your computer or iTunes, this article may help:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

Maybe you are looking for

  • Where can i get an otterbox case for my iPhone 5c?

    I want a reliable hard case for whenever I drop it because I know I will sometime. So where can i get one?

  • Hierarchial Data Retrieval

    Hi, Following is the DDL and DML im Using. create table test_connect_by (   parent     number,   child      number,   constraint uq_tcb unique (child) insert into test_connect_by values ( 5, 2); insert into test_connect_by values ( 5, 3); insert into

  • Saved PDF file issue...

    Once I create a PDF and save it to a file, I can no longer delete it by right clicking on it. Keep getting an error message saying file is open in another program.  Have Adobe closed and still get the same thing.  Am using x pro on a Win 8 operating

  • N95 backup file not recognized after Firmware upda...

    Hi, I've been updating my N95 from V11 to V12.0.013 right after I did a backup file. Backup went ok and no error reported. After fw update, I tried restoring data but Content Copier informs that "no earlier backup file exists for this phone". I've tr

  • The XML generated by the Lotus servlet component is not well formed

    Hello Experts, While integrating EP7 to Lotus Domino 7 we are facing some problem with XML parser. We have following configuration EP7 SP 13 Lotus Domino 7 All configurations related to SSO are done. SSO is working fine. All transports are created pr