IPod Nano, 2nd Generation. Does Not Charge, and Is Not Recognized
I have Posted: Aug 8, 2007 3:54 PM , but no replies. Also I see a certain user (Jeff) massively repeating posts.
Please help, my friends have got me an 2GB silver Ipod Nano, it goes through the whole routine on my friend's computers, they even put music into it for me, but when I connected it to my computer, the display says its fully charged (green plug inside battery) instead of charging (thunderbolt)!
I did everything, EVERYTHING, they asked online, from resets, reboots, getting latest vs. of iTunes, restarted over 10 times, switched from USB Normal and USB 2.0 ports repeatedly, followed both the tech support automated and live, then (as they asked) searched for a few hours to find the correct drivers, and installed everything I could for my VIA chipset, and it still doesnt work.
I remember one of (the call dropped initially) the tech support guys saying something about USB spor.inm
Still can't find it.
I need to upload my music and be able to charge my iPod on my own computer! Please help!
Windows XP Asus K8V motherboard, 2.6 GHZ AMD 64 bit, 1 GB RAM
Kindly help, someone
I have the exact same problem, and nothing works. When I plug it into computer, it's recognized, it syncs, and it plays while connected. As soon as I disconnect, it's dead. I've charge it overnight, I've let it drain overnight, I've plugged it into a charger with same result, I've used it on two different computers. HELP
Similar Messages
-
Hi,
I encounter a problem with my ipod nano (2 nd generation) because it not recognized anymore by itunes. When I say not recognized I mean that the ipod does not appear in the devices field of itunes. I do not know exactly when this problem appeared : i do not synchronize often my ipod but before with my macbook pro the synchronisation worked. iTunes sees others devices such as my iphone 5 and iPhone 4 with respectively iOS 7 and iOS 6.0.1. My macbook pro is updated with Maverick 10.9.2 and itunes is the 11.5.5 version. My MacBook pro is from 2009. With previous version of iTunes I know that my ipod could be synchronized.
I did not find any solution on the Apple Support, so I decided to send this post. If someone already encountered this problem and found th solution it would be very helpful ....Hello, Jonny-CH.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Cheers,
Jason H. -
The iPod still start and also plays music, but I can't see anything on the display.
I can see the backlight, but not more...
I have reinstalled, recovered and restarted the iPod.
The firmware and iTunes is at the newest version.
Anyone got experience with this? Is there a way to fix it?
Thanks for your helpSounds like you have tried all of the regular troubleshooting. So it points to an issue with your nano's LCD display. You'll have want to have it repaired/replaced either by Apple or a third party repair company.
B-rock -
My ipod nano 3rd generation is not recognized by my Windows 7 laptop when I plug it in under itunes latest version
Hi Matt00,
thank you for your response. I followed the steps you suggested, but still no luck. Is a the fact that I am using a notebook a problem? I have been doing more searching and it seems my HP Pavilion Notebook does not have a firewire port?
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion 17 Notebook PC
iTunes 11.3.1.2
QuickTime 7.7.5
FairPlay 2.6.15
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number xxxxxx
Current user is not an administrator.
The current local date and time is 2014-08-23 22:37:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
IPOD (G:\), iPod nano (3rd Generation) running firmware version 1.0.3
Serial Number: xxxxxx
Bus Speed: 61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 7.1.1
Serial Number: xxxxx
**** Device Sync Tests ****
No iPod, iPhone, or iPad found. -
My iPod touch 2nd generation does not sync my contacts. I only have iCloud contacts in my address book. How can i sync that?
I do not fully understand you question. To use iCloud on an iOS device requires iOS 5 and the 2G only goes to iOS 4.1.2 and thysyu can't access iCloud, including contacts.
Maybe you could sync the iCloud contacts with anopther program and sync that program with the 2G iPod.
The following smple states the following for Contacts:
iCloud: What if my device or computer doesn't meet iCloud system requirements?
Contacts
If you want to check your iCloud Contacts, you can do so by visiting icloud.com from a Mac or PC (as long as it meets the browser system requirements for icloud.com). -
my iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos I don't want to lose my music and audio books. What to do? It started after I updated iTunes.
iPod appears in Windows but not in iTunes
-
My ipod nano 2nd generation will not turn off, would i be able to get it replaced
My ipod nano 2nd generation will not turn off, could i fix or replace this ?
What do you mean it won't turn off? How are you trying to turn it off?
B-rock -
brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help
i did that middle button and top button for 6-10 seconds, hold play button, that hold button and got it right back and still it won't on but it is detected on my pc and itunes. i've already even put on some songs but it keeps on charging and charging for how many hours and if i remove it, it shuts off and won't turn on again.brand new/never been used iPod nano
Call Apple Care. You are still under warranty. You also have 14 days from the date of purchase to return your iPod with no questions asked.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
i have an ipod nano 6th generation .version 1.2 yesterday i restored it on i tunes using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok after starting by connecting to power and then disconnecting the cord.
what would be the reason and what to do?>Call Apple Care as you are still under warranty.
-
I have a ipod shuffle (2nd generation) that won't light up when plugged in to the power adapter. I have only used it a few times since I purchased it years ago. Also, when I plug it into my computer with itunes running, it isn't recognized at all, as in nothing happens when I plug the usb cable with ipod attached and on to it. Any help would be much appreciated.
but there is another unspecified error.
What is that error?
Are you sure she has a Shuffle? You mentioned a Sad Face.. that would indicate that the iPod has a display, which a Shuffle does not.
B-rock -
My ipod nano 7th generation is not recognized
my ipod nano 7th generation is getting detected but not recognized . it prompts that i should get latest version of itunes . i tried that but the problem still persists
im with you
I got a new laptop a couple months ago, now have a new ipod nano and it wont recognise it. Ive been to genius bar about 3 times on this, they were useless, and didn't really want to bother to spend time with me, and then went on phone other night for two and half hours to a person in apple ,new mexico, and now last night got a new ipod nano from apple shop and it still wont sync. ive spent hours again reading up on it but it just ownt recognise the device to sync it
this is getting really frustrating -
HT1238 ipod shuffle 2nd generation does not appear in Reset Utility window.
Hi there! I'm seeking some advice for repairing an old ipod shuffle.
My mom's 2nd generation iPod shuffle suddenly will not appear on her computer. She is using windows vista (sad face). I ran all the reccommeded troubleshooting suggestions, but still can't repair the disk.
When connected to the original computer (windows vista), the charging light comes on but the disk does not appear anywhere on the computer. I ran the diagnostics and it apparently has the most updated software, but there is another unspecified error.
When I tried to run the repair suggestions on my own computer, i can't get the disk to show anywhere....the charging light will not even come on.
Any other suggestions I might have overlooked?but there is another unspecified error.
What is that error?
Are you sure she has a Shuffle? You mentioned a Sad Face.. that would indicate that the iPod has a display, which a Shuffle does not.
B-rock -
Ipod nano 6th generation is not recognized by iTunes. How do I fix this??
I bought an Ipod nano 6th Gen. yesterday and I am not able to connect to iTunes. It is not recognized.
What version of iTunes are you running?
Allan -
HT1363 iPod nano 5th generation is not recognized by computer
I've uninstalled and installed iTunes, gone through the 5Rs, attempted all the USB ports, restarted the computer, attempted putting the iPod in Disk Mode, and I'm now going to put my iPod on YouTube with a shameful sign on it to punish it until it connects to my computer and uploads my new music! Can someone help me make these two devices communicate. BTW, the cable is functional, too. Thanks.
iPod appears in Windows but not in iTunes
-
HT1369 my iPod nano 4th generation is not recognized by iTunes.
I have always used iTunes with this iPod. I have Christmas music on it and I want some other music. This is only used for music on the Bose. It worked before Christmas but there has been updates to iTunes since then so don't know if thats the problem.
I have googled it and have tried everything that is mentioned but it still is not recognized. It shows up as a drive in my computer but on the devices for iTunes it isn't there.iPod appears in Windows but not in iTunes
-
I keep getting a Windows is uninstalling this decvice (code 21) error.
Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.
Maybe you are looking for
-
Help! do not want to loose music on my iPod by syncronizing it!
Hello, I got a brandnew iPod for christmas from my dad and now I'm ready to drop it out the window! The problem is my dad bought some music for me too, but he just uploadet it on my iPod and deleted the original files afterwards (means: I do have tha
-
HOw to get a common substring from two strings.
Hello, I have a question like..how to print a common substring in to different strings. example: String str1="dynamic" String str2="programing" so the output for this application is "am".
-
How to use JViewPort.scrollRectToVisible()?
Hi there, I have a JTable in a JScrollPane. The Drag and Drop for this JTable is done with MouseListener and MouseMotionListener. I do not implement DragSource, DropTarget, etc. When dragging over the edge of the visible area, the JTable should autom
-
Will sky go work with iPad 3 hdmi connector
I have no probs with utube using air share, and there probably is some protection with sky that stops me doing this but I was to buy a hdmi connector would this allow me to show sky go on mt tv.
-
Rounding up to a particular decimal place
Hi, I'm bringing a field into my report that uses up to eight decimal places. I'm tasked with rounding things up to the fifth decimal. Rather than rounding when the number is five or higher, it should always round up if it is above one. So for exam