Ipod nano 2nd generation malfunctioned, and windows doesnt recognize it.

When i connect my ipod a message comes up in the corner saying device malfunctioned, and windows doesn't recognize it.I tried reseting it but it didnt work. So i cant edit pics. or songs or charge it. And i shut the computer down and reset it and it still wont work.

Hey Steve,
Thanks for the question, and welcome to Apple Support Communities.
I understand that your iPod shuffle (2nd Generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod nano - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/assistant/itunes/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Mac OS X
iPod not recognized in iTunes and Mac Desktop
MacBook and MacBook Air: iPod won't mount when connected via USB hub
What to do if your computer won't recognize a USB or FireWire device
Thanks,
Matt M.

Similar Messages

  • Should an iPod Nano 2nd Generation Work With Windows Vista?

    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?

    mmu1253397 wrote:
    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?
    Just to close this out I was able to connect the second generation 4g iPod Nano without issue. In a matter of minutes I had it loaded, recognized by iTunes with up-to-date software, sync with over 900 songs and almost 200 pictures and then ejected (I manually manage music)! Really sorry for those who can't get iTunes and/or iPod to work!

  • HT5610 is ipod nano 2nd generation compatible with Windows 8?

    my ipod nano 2nd generation,  will not sync.  itunes says it is syncing, but nothing changes on my ipod. i tried resetting it, and everything stays the same on the ipod, not matching my current library.   i also tried manually dragging and dropping items onto the device, and still nothing happens.  i don't want to wipe everything off my ipod if it isn't compatible with windows 8, because then i won't be able to put my library, what songs/playlists are already there,  back on the ipod.

    it was until the last update of itunes, and many are having issues

  • Ipod Nano 2nd Generation 8G and a car stereo

    I want to play my ipod 2nd generation 8G through my car stereo via a FM transmitter.
    Anyone got any suggestions as to the best make for this? - The ones on the apple web site do not appear to be compatible with my old (?) ipod.

    Apple claims the playback time is up to 24 hours, and that's not written in stone and depends on how you use the iPod.
    See these.
    Beef up my iPod battery.
    How to accurately determine your iPod battery life.
    Can I make the meter more accurate?

  • I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itu

    I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another  computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itunes ?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

    my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

    This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
    It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
    If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
    Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
    B-rock

  • Ipod nano 2nd generation isnt recognized by itunes or windows help!!!

    My iPod nano 2nd generation when i plug it in to the computer it charges but it isnt regocnized by itunes or windows as a disk help!

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • I have an iPod nano 2nd generation and I want to download the songs I have on it to my new computer, as my old one crashed with all the songs on it.  I also got a new iPod and would like to transfer the old songs onto it. How do I do this?

    I have an iPod nano 2nd generation and I want to download the songs I have on it to my new computer, as my old one crashed with all the songs on it.  I also got a new iPod and would like to transfer the old songs onto it. How do I do this?

    Ok so sorry for clogging the community!! I figured it out - you have to copy your videos into itunes manually. I did that, synched and all good!

  • IPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    There is no other way to bypass the combintation lock other than to connect the nano to iTunes and restore it to factory settings, erasing all content and settings from the iPod.
    B-rock

  • The screen on my ipod nano 2nd generation turns black. It still plays music. I've tried resetting the ipod to clear the black screen and the screen goes back to it's normal state but after a few minutes the screen goes black again.

    The screen on my ipod nano, 2nd generation, turns black. It stills plays music. I've tried resetting the ipod to clear the black and the screen goes back to it's original state. But after a few minutes the screen turns black again, while the music is still playing. What can I do about this?

    That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
    B-rock

  • IPod Nano (2nd generation) not fully compatible with BOSE SoundDock

    I can't get the remote control for my BOSE SoundDock to function with my newly purchased 2 GB iPod Nano (2nd generation).
    The BOSE manual states that the remote control will not function properly if the iPod doesn't have the proper (or later) version of Apple software installed.
    The "correct" software that BOSE identifies for the iPod mini (Nano) is version 1.2 or later.
    This, however, appears only applicable to iPod 1st generation Nanos.
    My brand new ipod Nano has version 1.1.2 software and iTunes has confirmed this to be the most current software for this 2nd generation unit.
    Is this a common problem? It's hard to believe the BOSE unit does not cover 2nd generation iPod Nano software.
    Other than the non-funtioning remote control, the BOSE unit works fine and with the BOSE-supplied black adpater for the Nano.
    Dell PC   Windows XP  
    Dell PC   Windows XP  

    Actually, the BOSE SoundDock is compatible with the iPod Nano.
    After troubleshooting with the BOSE staff, and some excellent customer service, the problem was narrowed down to the remote control device.
    BOSE sent out a new remote control and the unit works fine with my iPod Nano.
    Appreciate all who offerred assist in this matter.
    Dell PC   Windows XP  

  • Ipod nano (2nd generation) won't play any sound

    as the title says, my ipod nano (2nd generation) wont play any sound. the songs still play just fine, but no sound or very little sound is coming out. i've tried different headphones, none of them working. and then i attempted using my speakers which worked at the highest volume of both the ipod and the speakers, but very little sound came out and it sounded fuzzy.
    after this, i reset my ipod, then restored it, and still no sound. so i reset the ipod again, making sure that everything under the setting was correct for the sound. i even tried putting the clicker on "headphones" and that didnt work either. it connects to the computer fine and has a fully charged battery.
    help please?
      Windows Vista  

    thank you for your suggestions, but everything seems to be working normally except the sound coming out of the ipod. i reset the volume limit and nothing. also, there was no volume limit in the summary tab.
    again, thank you for your help... any other suggestions/ideas?

  • IPod Nano 2nd generation software version

    Hi
    I need to grab a used iPod Nano 2nd Generation to replace the one I left on the plane   : (
    It's quite amazing how much value these units hold on eBay. My question is, what is the latest (or possibly the last) software version that Apple has released for this unit? I want to make sure that I ask the eBay seller what version of the software is installed on the one I'm looking at, as I feel that a currently updated unit will have the best chance of functioning properly. I am running Windows 7 on my home computer.
    One of the ones I'm looking at has a picture of the information screen on the unit and it says it has software version 1.1.3. That can't be anywhere close to the last/best one, can it?
    I assume that 2GB, 4GB and 8GB are the same in terms of software. I am looking for a 4GB version, or possibly an 8GB.
    Any help is appreciated.
    Nick

    That is correct.  Version 1.1.3 was the last firmware update released for the 2G Nano.
    B-rock

  • IPod nano 2nd generation works with iTunes but screen blank!

    Ive had my black iPod nano 2nd generation for quite a bit of time now, the iPods screen wouldnt come on one day but iTunes acsepted it and so i restored it. The screen was still off and so now im here asking, Please help, Thanks!

    Hello upthereds,
    And welcome to Apple Discussions!
    I have purchased a windows 7, 64 bit laptop. I have a 2nd generation iPod Nano if I download the 64 bit version of iTunes will this cause problems with compatibility between my laptop, iTunes version 10.1 and the 2nd generation iPod Nano?
    Yes it is compatible and should work. Let us know if you run in any problems though and we'll do what we can to help.
    B-rock

  • Can I replace my ipod nano 2nd generation with ipod nano 3rd generation.?

    I bought an iPod Nano 2nd generation last year in June and the warranty lasts until June of this year 2008. I want to know if there is any way to upgrade to an iPod Nano 3rd Generation without paying for a whole new iPod. If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano. Is there any way to get the 3rd Generation iPod Nano?
    [x|http://www.parikesit.com]

    If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano.
    If they still have iPods in stock of the older generation, you will get one of these; the color may vary, but other specifications should be the same. If not, you will most likely get a current model.
    You may want to find someone willing to purchase that iPod, and then put the money toward a current one.
    (32512)

Maybe you are looking for

  • HT1349 I need to register the serial number of a new iphone to my itunes library so that I can sync it....how do I that?

    My friend just upgraded her iPhone and gave me her old one.  It is the same as my iPhone but mine has quite a few features that no longer work so she is letting me use hers until it is time for an upgrade.  I tried to sync my itunes and apps to it bu

  • Error while processing dimension!!

    Hello Experts, We are using BPC 7.5 M sp04, I am trying to add a "Parenth6" column to the "Org" dimension (Org dimension already has Parenth1 to Parenth5 columns), After adding the "Parenth6" column I tried processing the dimension and it is showing

  • Issue while Updating a table having Unique Secondary Index

    Hi, I am trying to update a 'Z' table in which there are 5 fields comprising of primary key. Out of them 2 key fields are defined as a part of seconadry index with 'Unique' option selected. As per the requirement, I am trying to update the table usin

  • Web dynpro ALV and some other questions

    Hi All, I have couple of question for experts. I am very much new into Web Dynpro world, and i have one web dynpro application built by my old colleague. I want to add search feature into the application so that out of 1000 records i could search one

  • My Delete key won't work

    I'm having difficulty with the delete key. It won't work unless I highlight what I need to delete. But if I just want to delete an individual character without highlighting it, it will not work. What should I do?