IPod Nano (2nd Generation) Screen Is Completely Blank

Hi,
When I tried turning on my iPod Nano, it didn't work. The screen was still black and it wouldn't turn on. So I tried toggling the hold button and pressing the center and menu buttons simulatneously but that wouldn't work either. A few nights ago I had accidentally dropped my iPod into the sink and everything but the forward button was working fine. I'm wondering if that has something to do with my iPod not working. It was working perfectly fine up until now..
Please help.
Thanks

Hi, it seems as if you are having the same problem with yours that I am having with mine. My screen is completely blank and my ipod doesnt turn on or anything not even when I hook it to the computer. I have reinstalled everything ad still nothing. I have toggled with it and still nothing and I am getting very annoyed lol. It doesnt even come up on itunes either. I havent dropped in water or anything. Last I knew the battery went dead and something about a corrupted file, while i tried charging it came up. It has worked fine and just today it stopped wowrking and I dont know what to do and hoping someone can help me out.

Similar Messages

  • IPod nano 2nd generation works with iTunes but screen blank!

    Ive had my black iPod nano 2nd generation for quite a bit of time now, the iPods screen wouldnt come on one day but iTunes acsepted it and so i restored it. The screen was still off and so now im here asking, Please help, Thanks!

    Hello upthereds,
    And welcome to Apple Discussions!
    I have purchased a windows 7, 64 bit laptop. I have a 2nd generation iPod Nano if I download the 64 bit version of iTunes will this cause problems with compatibility between my laptop, iTunes version 10.1 and the 2nd generation iPod Nano?
    Yes it is compatible and should work. Let us know if you run in any problems though and we'll do what we can to help.
    B-rock

  • The screen on my ipod nano 2nd generation turns black. It still plays music. I've tried resetting the ipod to clear the black screen and the screen goes back to it's normal state but after a few minutes the screen goes black again.

    The screen on my ipod nano, 2nd generation, turns black. It stills plays music. I've tried resetting the ipod to clear the black and the screen goes back to it's original state. But after a few minutes the screen turns black again, while the music is still playing. What can I do about this?

    That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
    B-rock

  • White screen on iPod nano 2nd generation

    I get a white screen on my iPod nano 2nd generation.  iPod still plays but I can't see what's on screen to control it.  Do I need a new battery?

    Hi mmeves,
    Any luck ? I have got the same problem with my iPod nano too.
    I tried resetting but in vain!
    Pl. let me know if you could get yours fixed
    rgds
    Mahesh

  • My ipod nano 2nd generation has a white screen when i turn it on.

    Everytime i turn on my ipod nano 2nd generation it goes to a white screen and i dont know what to do...can u help me???

    Anything new about this?

  • I have an ipod nano 2nd generation with a non responsive click wheel

    I have an ipod nano 2nd generation with a non responsive click wheel. I have fully charged it tried resetting it and on two different computers with the latest iTunes I have restored it with the latest firmware then moved it to hold and off hold held in the menue button and select button for 10 seconds but all I get is a screen where I select the language but cant get any response from the scroll wheel.
    The hold button is working (I see the lock icon go on and off) I have done the restore procedure and then reset many times but no good I am wondering if I should open it up and disconnect the battery for 30 seconds.
    I would appreciate any advice thanks in advance. (This is my Daughters ipod mine is an 8 gig one.)

    You need a newer model iPod, a 4G or 5G. The 2G can only go to iOS 4.2.1

  • Ipod nano 2nd gen screen is scrambled

    I have a 2nd gen Ipod nano and the screen is either blank or scrambled.  I tried to reboot it by holding down the menu and center button simultaneously and that had worked in the past but not this time.  Before I would get the Apple logo on the screen but nothing now. 

    Have you tried any of the standard 5 r's of troubleshooting yet?  If so, and the issue still persists, your iPod's LCD is damaged and needs to be replaced.
    B-rock

  • IPod Nano 2nd generation software version

    Hi
    I need to grab a used iPod Nano 2nd Generation to replace the one I left on the plane   : (
    It's quite amazing how much value these units hold on eBay. My question is, what is the latest (or possibly the last) software version that Apple has released for this unit? I want to make sure that I ask the eBay seller what version of the software is installed on the one I'm looking at, as I feel that a currently updated unit will have the best chance of functioning properly. I am running Windows 7 on my home computer.
    One of the ones I'm looking at has a picture of the information screen on the unit and it says it has software version 1.1.3. That can't be anywhere close to the last/best one, can it?
    I assume that 2GB, 4GB and 8GB are the same in terms of software. I am looking for a 4GB version, or possibly an 8GB.
    Any help is appreciated.
    Nick

    That is correct.  Version 1.1.3 was the last firmware update released for the 2G Nano.
    B-rock

  • I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itu

    I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another  computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itunes ?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Should an iPod Nano 2nd Generation Work With Windows Vista?

    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?

    mmu1253397 wrote:
    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?
    Just to close this out I was able to connect the second generation 4g iPod Nano without issue. In a matter of minutes I had it loaded, recognized by iTunes with up-to-date software, sync with over 900 songs and almost 200 pictures and then ejected (I manually manage music)! Really sorry for those who can't get iTunes and/or iPod to work!

  • My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

    my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

    This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
    It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
    If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
    Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
    B-rock

  • IPod Nano (2nd generation) not fully compatible with BOSE SoundDock

    I can't get the remote control for my BOSE SoundDock to function with my newly purchased 2 GB iPod Nano (2nd generation).
    The BOSE manual states that the remote control will not function properly if the iPod doesn't have the proper (or later) version of Apple software installed.
    The "correct" software that BOSE identifies for the iPod mini (Nano) is version 1.2 or later.
    This, however, appears only applicable to iPod 1st generation Nanos.
    My brand new ipod Nano has version 1.1.2 software and iTunes has confirmed this to be the most current software for this 2nd generation unit.
    Is this a common problem? It's hard to believe the BOSE unit does not cover 2nd generation iPod Nano software.
    Other than the non-funtioning remote control, the BOSE unit works fine and with the BOSE-supplied black adpater for the Nano.
    Dell PC   Windows XP  
    Dell PC   Windows XP  

    Actually, the BOSE SoundDock is compatible with the iPod Nano.
    After troubleshooting with the BOSE staff, and some excellent customer service, the problem was narrowed down to the remote control device.
    BOSE sent out a new remote control and the unit works fine with my iPod Nano.
    Appreciate all who offerred assist in this matter.
    Dell PC   Windows XP  

  • Can I replace my ipod nano 2nd generation with ipod nano 3rd generation.?

    I bought an iPod Nano 2nd generation last year in June and the warranty lasts until June of this year 2008. I want to know if there is any way to upgrade to an iPod Nano 3rd Generation without paying for a whole new iPod. If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano. Is there any way to get the 3rd Generation iPod Nano?
    [x|http://www.parikesit.com]

    If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano.
    If they still have iPods in stock of the older generation, you will get one of these; the color may vary, but other specifications should be the same. If not, you will most likely get a current model.
    You may want to find someone willing to purchase that iPod, and then put the money toward a current one.
    (32512)

  • Have old ipod nano (2nd generation) with music from an old itunes account ... I have new itunes account now...how do I get my old purchased music into my new itunes library?

    I have an old ipod nano (2nd generation) with music on it from an old itunes account from a few years ago.  I have a new itunes account now.  How do I get the music (that I purchased) transferred into my new itunes library?

    Hi sid1010,
    Welcome to the Support Communities!
    You can redownload music that you have purchased directly to your iTunes Library.  Here's how:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Cheers,
    - Judy

  • I have an iPod nano 2nd generation and I want to download the songs I have on it to my new computer, as my old one crashed with all the songs on it.  I also got a new iPod and would like to transfer the old songs onto it. How do I do this?

    I have an iPod nano 2nd generation and I want to download the songs I have on it to my new computer, as my old one crashed with all the songs on it.  I also got a new iPod and would like to transfer the old songs onto it. How do I do this?

    Ok so sorry for clogging the community!! I figured it out - you have to copy your videos into itunes manually. I did that, synched and all good!

Maybe you are looking for

  • Instalation developer version 1.5.1

    I WANT TO KNOW IF THERE IS PROBLEM INSTALLING DEVELOPER 1.5.1 IN WINDOWS 2000 PROFESIONAL. WE HAVE INSTALLED THESE VERSION IN WINDOWS 95/98 BUT WE INSTALLED IN WINDOWS 2000 PROFESIONAL AND IS GIVING ME PROBLEMS EXECUTING QUERIES AND OTHERS PROBLEMS.

  • AppleTV Screensaver not working

    I recently set up a completely new wireless home network.  Finally, after updating router firmware, all of my devices seem to be connecting to the router and communicating with one another except for the Homesharing between my AppleTV (2nd gen) and m

  • Workflow - Change description "Cancel and keep workitem in inbox"

    Hi, Can you please tell me whether we have a way to change the description of "Cancel and keep workitem in inbox" as "Cancel". Thanks Ashu

  • How could i use mac look & feel in windows?

    as it's restricted by licenses issues and no specific lib available anybody knows? thx max

  • How to create InboundPlug by Code (Programatically)

    Hi, I have to create Inbound Plug Programatically at runtime. I tried to look for option but could not find one. The Outnound Plug creation is possible then why Inbound Plug Creation is not available in the same way. Please help. Thanks & Regards, Dh