IPod nano 3G goes into eternal loop with firmware 1.0.2 - fixed with 1.0.3?

After automatically upgrading to firmware 1.0.2, my iPod nano would enter an eternal loop (apple logo appears/disappears/appears/... until battery is empty) when ejecting from iTunes. The only way of resurrecting it was entering disk mode manually, then connecting & restoring original settings through iTunes. However, then the same problem was seen again when ejecting. I replaced the iPod twice, but both (brand new) devices showed exactly the same problem, right out of the box. I re-installed iTunes as well, no effect. Finally I asked (and got) my money back and returned the iPod. Has anyone else seen the same problem and does anyone know whether firmware update 1.0.3 has fixed the issue? I may then consider to buy another iPod...

Thank you for the suggestion. I tried this with the last iPod I received, which already showed firmware 1.0.2 when connecting it to iTunes (i.e. without upgrading) and the described problem. I followed instructions for replacing the two files indicated with the 1.0.1 ones downloaded from the web, but iTunes still claimed to have firmware 1.0.2 on the iPod and the problems remained. Though Apple documentation claims that there is an option to set back the firmware to an earlier version, this option does not seem to exist in the Windows version, I only had the option to search for an upgrade or leave things as they are, so I was stuck with 1.0.2

Similar Messages

My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?

My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?

Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i

Unable to open files associated with Adobe Reader - program goes into a loop

i am unable to open any file associated with adobe reader or adobe pro. when i double-click the file, adobe reader opens up but it goes into a loop.
adobe reader opens, then a progress window opens, as if the file will open but adobe closes and opens again and the same cycle repeats itself until i manually close the program.
any advice?
update:
i can open regular .PDF files when i double-click the icon and i can also open .PDF files when i open adobe reader first and then choose open file. it's just the .FDF files that are the problem (so far).
the file in question happens to be an .FDF extension, which is an internet generated form. i attached a screen shot of the screen that pops up, goes away, and pops up again that creates the loop.
the white out section is the server name where the file was saved to. but i also get the same symptoms when i am in internet explorer, hit the generate form button.

hey ankit,
sorry i didn't see a notification that you replied to this discussion.
"1. Generate a new PDF and a FDF file. Try opening the same and see if it behaves the same way."
yes, it does behave the same way, it's just a continuous loop until i have to kill the process.
"2. Check if you have access to the PDF that is being used by the particular FDF."
by this do you mean the correct permissions? if that is what you mean, then yes, the permissions are set correctly.
"3. If possible, please send me the FDF and the associated PDF that is behaving in this way on your system."
i really wish i could but the information in the form is sensitive and cannot be sent.
as an update though, i reimaged the customer's workstation, installed Adobe Reader 10.1.1 and it worked perfectly (finally). HOWEVER, after about two weeks the same symptoms returned!

Hi everyone. I have a iPod nano 5th gen and every time I charge it, it comes up with the apple sign. It just won't turn on. I can restart it but it goes to the apple again. Is there a way I could get it replaced? I did win it in a game in syd.Any thoughts

Hi everyone. I have a iPod nano 5th gen and every time I charge it, it comes up with the apple sign. It just won't turn on. I can restart it but it goes to the apple again. Is there a way I could get it replaced? I did win it in a game at penrith bowling .Any thoughts????????

Can you play the song in iTunes?
If you can't the song file is probably corrupt and needs to be replaced.

Iphone keeps going into reboot loop

Hey guys, i dropped my iphone from 1 month ago and since it, the signal went away sometimes while it was charging and when i took the stick out my iphone went into reboot loop, then i just waited some time and it went back.
Now suddenly 2 days ago, my iphone keeps going into reboot loop everytime and when i get it out then around 9hours later, it comes again..
I really need help since it affects my school, when the alarm don't work in the morning.
TLDR; Iphone keeps going into reboot loop, need help!

Have you got the latest 1.1.4 software installed, along with the latest version of iTunes?
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'
Disclaimer required by Apple Discussions Terms of Use: Mac611 may receive some form of compensation, financial or otherwise, from my recommendation or link.

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

This is usually a sign that your iPod's headphones are not plugged in all the way. Make sure that you cannot see any of the silver still showing from the headphone's plug. You should hear a sort of popping/clicking noise when inserting the headphones letting you know that they have been fully seated.
B-rock

Cisco_Webex_Add-on goes into a loop on install

I am running mac book pro with OS X 10.9.5 (13F34). Webex prompts me to install Cisco_Webex_Add-on. After "successful" installation, it again asks me to install the same and keeps going into a loop. Unable to run webex session. Any help?

Webex will open but the minute I try a one click meeting or to join or start a meeting it fails and tells me to install Install Cisco WebEx Add-On.App
I have the same problem Install Cisco WebEx Add-On.App looks like it install then disappears and never loads keeps asking to redo the same install.

PSPPYRUN is going into a loop

hello team
PSPPYRUN is going into a loop. see log file sequence. You can see its re-calculating that pay group over and over again. We have done everything see task list competed and there is no long running sql in the database either . Is there some configuration in the application we have done which is causing this infinite loop? This is north american Payroll 9.2 and We have applied Tax : 2014-B on 2014/06/30. We are only running for one paygroup using one run id. One id to one paygroup relationship.
Task completed prior to running PSPPYRUN.
1. Recycle Process Scheduler – Completed
2. Cleared Process Monitor logs - Completed
3. Compiled all COBOLs - Completed
4. Run all Store statements – Completed
5. Deleted duplicate employee – Completed
6. Running STATS – Completed
PeopleSoft Payroll -- Version 9.2
Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
Off-Cycle Calculation started for Run: D22
at 23:27:48.20.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:48.80.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:53.83.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:54.52.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:55.19.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:55.87.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:56.54.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:57.21.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:57.89.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:58.58.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:59.28.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:27:59.97.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001
                        Pay Group: 005
                        Pay End Date: 2014-05-24
at 23:28:00.61.
     2 check(s) already calculated.
     0 check(s) to calculate.
Calculation started for Company: 001

Dear All,
             I will explain the scenario further.
Plant : PL1
Vendor Location : VL1
Subcontractor Location : SL1
Component manufactured at VL1 : C1
PPM maintained at VL1 for C1
Component supplied by VL1 to PL1 : C1
Manual Tlane created from VL1 to PL1 for C1
Component, in turn, supplied by plant PL1 to SL1: C1
Manual Tlane created from PL1 to SL1 for C1
Product Manufactured at Subcontract Location : SFG
PPM maintained at SL1 for SFG
Product supplied by SL1 to PL1 : SFG
Creating a Purchase Inforecord with subcontracting type and CIFing to APO creates a Tlane for SFG from SL1--->PL1
Procurement type at PL1 for SFG is "F"
Procurement type at SL1 for SFG is "E"
Procurement type at PL1 for C1 is "F"
Procurement type at SL1 for C1 is "F"
Procurement type at VL1 for C1 is "E"
The Tlanes are in opposite direction and for different product.
For C1, it is VL1 -> PL1 -> SL1
For SFG, it is SL1 -> PL1
Can this be the cause of the run going into the loop?
Thanks in advance
Ehsan Ahmed

I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

You do not merge libraries.
iDevices sync to one and only one computer.
If you want a single library, you manually move the content from one library to another... all content will still be associated with the Apple ID it was acquired with.

How do I get my iPod Nano 6 to do a loop in a playlist? I can't find the repeat all button.

How do I get my iPod Nano 6 to do a loop in a playlist?

So you're looking for the Product Registration page correct? If so, here is the link.
http://register.apple.com/
B-rock

OIM11gR2:Event handler goes into infinite loop

Hi Experts,
I have created an event handler where i am doing some functionality on execute function, that updates some UDF's when a user modifies value from the user modify form.
I am calling the event hanlder on modify action of User entity
Now the problem i am facing is that the eventhandler goes into infinte loop and modifies the values again and again without any break.
Please help out, i am not able to kill the process unitill i restart the server :-(

You can use something like below to get old values :
HashMap<String, Serializable> interEvtDataMap = orchestration.getInterEventData();
          User newUserState = (oracle.iam.identity.usermgmt.vo.User) interEvtDataMap.get("NEW_USER_STATE");
          User oldUserState = (oracle.iam.identity.usermgmt.vo.User) interEvtDataMap.get("CURRENT_USER");
          newFirstName = (String)newUserState.getAttribute("First Name");
          oldFirstName = (String)oldUserState.getAttribute("First Name");
Thanks
Suren

I have an ipod nano and the screen is just white and says ok to disconnect with a tick on. Does anyone know why or how can I sort it!?

I have an Ipod nano and the screen is just white and says ok to disconnect with a black tick on. Can anyone suggest what I can do?

Reset the Nano.
How to reset iPod
B-rock

On log on my home page appears, goes into a loop, icons flash on and off and wont load

HP Logo and the log on page load OK but when I log on to my home page it goes into a loop. The screen and icons keep flashing as if the screen keeps reloading. I cant do anything to stop it.

This post describes exactly the problem I'm having. I can access "HELP" (obviously) and by using "ctrl-alt-delete" I can assess Task Manager and see systems and services. On Services, many are marked "stopped." CPU power is variable, from 33% to 98%. I don't understand any of this.

My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

When I start iPhoto it goes into a loop ?

iPhoto disappeared suddenly ! I then re-installed it. When I click on iPhoto it goes into an eternal loop. I also founf out that iPhoto Library suddenly conatins 32000 photos with a size of 26.9 Gb ?

First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

IPod nano 3G goes into eternal loop with firmware 1.0.2 - fixed with 1.0.3?

Similar Messages

Maybe you are looking for