Ipod Nano (3rd Gen) Contstantly needing reset to turn on

This is my first Ipod and I am very disappointed in that I constantly have to reset it to turn it on. It has charge and can take numerous attempts to turn on by resetting. Am I doing something wrong - or do I need to send it back?
I am resetting it by switching the hold on/off and then holding down Menu&Middle Button.

My new 3rd Gen iPod has this very same problem. It needs constant resetting - in particular when it's been off for a while (e.g. overnight). I've upgraded the firmware to 1.1 and have also restored the iPod using iTunes, but it hasn't rectified the problem.
It was a present, so can I take it back and get it replaced?

Similar Messages

I need help restoreing my ipod nano 3rd gen so its like new

I need help restoreing my ipod nano 3rd gen so its like new

Plug it to your computer using iPod USB Cable (any cable should work excluding iPhone 5 and Shuffle cables)...... when you see your iPod in iTunes go to that iPod and click restore...... the whole process should take (depending on what you have on your iPod and its is up to date) it should take no longer than 30 minutes...... then it will ask if you want to set up as new iPod or restore from back-up (itunes back up), since you said:
so its like new
click set as new iPod and follow through what they said.

Ipod nano 3rd Gen not recognized by itunes or windows 7

USB device not recognized.
things I have done
put Ipod in disk mode still didn't recognized
My Ipod Classic 6th Gen works fine
It shows 3 Mass Storage Device
when I plug in Ipod nano 3rd gen it shows unknow device
have deleted Mass storage devices and Apple Moble Devices
unpluged computer from wall
nothing solving problem
I also tried it on my laptop its not being recognized
my wife Ipod nano is doing the same thing as mine
its got to be the software download from itunes because it has worked on all previous versions.

I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
I have tried resetting, I have tried downloading newest Itunes.
Must be the Nano itself if it doesn't get recognized by mutliple PCs?
I haven't used the Nano for probably 2 months. Previously it worked fine...
One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
Thanks,
Global_mongrel

Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

Ipod nano 3rd gen (click wheel)

I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
Thanks.

Clickwheel games are no longer available in the iTunes store. Sorry.
B-rock

Driver for Ipod Nano 3rd Gen

Hi
Just brought Ipod nano 3rd gen and plugged it into PC. It is not able to install properly - computer says it can't find driver. Any ideas how to resolve this?

I am having the same issue here.
OS: Vista ultimate 64-bit
iTunes: 7.6.0.29 (64-bit)
iPod: Nano 8gb 3rd gen
I currently have a 60gb iPod Photo that works flawlessly. I bought the Nano tonight, brought it home, and charged it up. Plugged it in, and now Windows Vista is asking for drivers for the Nano. Doesn't recognize the Nano at all.
The Nano knows it's plugged in, and is giving me the "eject before disconnecting" screen. However, Vista wants drivers, and iTunes doesn't recognize the Nano is connected whatsoever.
Can someone please shed some light on this for us? Thanks.
[edit] Yes, I have reset the Nano. Yes, I have uninstalled iTunes, rebooted and re-installed iTunes. Yes, I also tried putting the Nano into Disk Mode manually and connecting it to the system, but the system still wants drivers....
[edit2]And yes, I'm using the administrator account on the system, too.

If I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...

if I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...
They are not listed as devices on the itunes store account...

Hi BradSLane,
Thanks for using Apple Support Communities. This article has one method to find your serial number:
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
Go to My Support Profile*.
Sign in with your Apple ID.
View your purchases in "My Products".
* Currently available only in certain languages.
Note: If you need help remembering your Apple ID(s), go here.
Take care,
- Ari

My iPod nano 3rd gen went mad then all the songs were gone can I get them back

My iPod nano 3rd gen wiped all my music can I recover it

If it's no longer in iTunes or stored in a backup anywhere, I"m afraid you are out of luck.
For music purchased in iTunes, you can redownload it again no cost via iCloud if you live in a country where this service has gone live. See this article for more details.
http://support.apple.com/kb/ht2519
As for music imported from outside of iTunes, you'll need to rerip those into iTunes if at all possible.
B-rock

Will my computer read my new ipod nano 3rd gen?

i just bought a new ipod nano 3rd gen from circuit city before i opened it i looked on the back and saw system requirments it says nothing about being compatible with windows xp media center edition and i have windows XP media center edition 2002 sp2. will the ipod nano 3rd gen work with my computer?

Yes it will work fine. iTunes just needs XP and doesn't really care what sort of crazy version that came with whatever computer you bought. It is still just XP maybe configured or a little more specifically.
Patrick
p.s. This is a Tablet laptop I assume?

IPod Nano 3rd Gen won't play AIFF files from Logic Pro 9

Hi, so I've bounced a few tracks I was working on in Logic pro 9 as AIFF files, imported them into iTunes and then synced them down to both an iPod Touch 2nd gen and this iPod Nano 3rd Gen. The tracks play fine on the iPod Touch, but on the Nano, when I try to play a track, it shoes the "player" screen for a second, but it always bounces back to the track listing.
According to the iPod Nano 3rd gen spec sheet, it does support AIFF files:
http://support.apple.com/kb/SP14
Any idea as to why this is happening?
Also, I'm on Mac OS X 10.6.4, iTunes 9.2 and I reset the iPod nano just before starting this whole project.
I'd like to keep the tracks in AIFF if possible...

Greetings WonderfulT1,
If you are having an issue with being unable to start your iPod nano when it is not connected to the computer, I would suggest that you troubleshoot using the steps on this page -
Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
Thanks for using Apple Support Communities.
Be well,
Brett L

How long will a 5 year old iPod Nano 3rd gen's battery last?

Hello,
I am thinking about buying a used mint green iPod Nano 3rd gen off of ebay. I was wondering how long the battery would last?
Thanks,
themiz

i found this from another user and it worked for me!
I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all. Mine is also refurbished.
I called Support and the automated phone person gave me these steps:
1. Plug the iPod into the computer
2. Set it down on a flat surface
3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!!

Ipod nano 3rd gen unit is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help

ipod nano 3rd gen unit windows xp. Nano is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help please.

Sounds like the hold switch is broken, meaning you'll need to have your iPod serviced/replaced either by Apple or a third party repair company.
B-rock

Have you been having problems with ipod nano 3rd gen?

Have you been having problems with your ipod nano 3rd gen? got a windows xp computer? is your pc not recognizing it? I think i may have the solution. After 2 2 hour calls to apple tech support they were stumped. we reset it again and again, reinstalled itunes again and again. and they had no solution for me. I went to my device managerand there was a device called (apple Ipod USB driver) with a yellow exclamation point. I tried updating driver but to no avail. I tried uninstalling and reinstalling and nothing. But then I had an epiphany. I went to the device manager right clicked the apple ipod usb device clicked properties then update driver. Hardware wizard went up and I chose not to install automatically. and i chose to install driver manually. and then I installed a generic usb mass storage driver in its place and presto!!! it worked! it was instantly recognized by itunes and it took me to the registration page. I did what the apple support team wasn't able to do for 4 hours. I wonder if they're accepting applications... Anyway i hope this helps anyone out there cause i know i went through a lot of stress.

the driver is just a regular usb mass storage driver. it's in your computer. it's just a matter of installing it manually where it saya to include the location of the driver click browse and choose c:\windows\system32

IPod Nano 3rd Gen stuck in diag mode

I have an iPod Nano 3rd Gen stuck in diag mode. I have reset it multiple time using the select button and the menu button with it pluged in to the wall, into the computer and not plugged in at all. I reset it using the reset option under power and nothing. Please, can someone help?
Thanks

OK. My first time seeing this thread so hopefully you'll share your success results with me.
Here is the issue:
1) iPod Nano 5th gen stuck in Diags Ver: N33GreatDane2A45bp
2) When I rest by choosing Reset from the Diags Power sub-Menu it boots and brings up the white Apple logo and back to Diags menu
3) If I reset by holding down Menu button and Center button, same thing happens: Apple logo followed by Diags menu (It flashes iPod Display Console)
4) So I am always stuck in this loop.
5) Can't restore from iTunes since the iPod is never recognized in iTunes.
Thoughts anyone?

Ipod nano 3rd gen. some albums have suddenly disappeared from ipod, but they are showing as ticked on itunes library, have bought more tracks since on itunes and they are showing, any help please

ipod nano 3rd gen - tracks (whole albums) have disappeared from ipod but are showing ticked in itunes library and ipod is synched, have bought tracks from itunes since this happened and they are fine, any help please

You may have transferred all your songs, but your iPad is seeing the library as a different entity.
The following article(s) may help you.
Moving your iTunes library to a new computer

Ipod Nano (3rd Gen) Contstantly needing reset to turn on

Similar Messages

Maybe you are looking for