IPod Nano 3rd Gen Corrupted File

Hello Everyone
So I have two computers, I have a PC laptop running Windows 7 and a MacBook Pro. I originally connected my Nano to my macbook to sync to iTunes, but I want to transfer everything to my PC, including my Nano. I've tried to restore my Nano on my PC, but it says that there is a corrupted file, and I don't know what this means....I also already sold my MacBook and can't get it back.
Is there a way this can be fixed?
Thanks

Hello there,
And welcome to Apple Discussions!
Perhaps try reformatting using the instructions provided in this article. Just make sure it's not a quick format. And yes the instructions were written for Windows XP, but the steps are quite similar on Windows 7.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

Similar Messages

IPod Nano 3rd Gen won't play AIFF files from Logic Pro 9

Hi, so I've bounced a few tracks I was working on in Logic pro 9 as AIFF files, imported them into iTunes and then synced them down to both an iPod Touch 2nd gen and this iPod Nano 3rd Gen. The tracks play fine on the iPod Touch, but on the Nano, when I try to play a track, it shoes the "player" screen for a second, but it always bounces back to the track listing.
According to the iPod Nano 3rd gen spec sheet, it does support AIFF files:
http://support.apple.com/kb/SP14
Any idea as to why this is happening?
Also, I'm on Mac OS X 10.6.4, iTunes 9.2 and I reset the iPod nano just before starting this whole project.
I'd like to keep the tracks in AIFF if possible...

Greetings WonderfulT1,
If you are having an issue with being unable to start your iPod nano when it is not connected to the computer, I would suggest that you troubleshoot using the steps on this page -
Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
Thanks for using Apple Support Communities.
Be well,
Brett L

My iPod nano 3rd gen is stuck in a restore loop.

My iPod nano 3rd gen is stuck in a restore loop. I have wiped it with Disc Utility and attempted to restore with iTunes, but there was no effect. I checked it in diagnostic mode against an identical pod and found no significant differences in the results, both checked out fine. I know that this is not a windows driver issue since I use a mac. In any case such an issue should have been resolved when I wiped the pod. I have not attempted to load any music on it or sync my library, so a corrupted file seems unlikely as well. there is no water damage and the case is in excellent condition. I have no idea whats wrong with it so any help or suggestions would be appreciated.

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes

I'm tring to convert video from Youtube to play on my ipod nano 3rd gen. When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
What do I do? I tried Real player converter too - no luck.

I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
B-rock

Mac ipod nano 3rd gen - to windows xp

Hey every body,
I currently own a ipod nano 3rd gen. I however have mbp at home(where the nano is registerd) Till yesterday i saved a file on my nano. Tried opening the file today on the pc. However it does not come up. It says that the nano is not formatted. Anyone know how i can access this file?

As far as I know you can't. A PC can't read a Mac-formatted iPod is the problem.
If you have to use the Nano on both OS, you will have to have the Nano in PC format. A Mac can read a PC formatted iPod, but not the other way around, as I said above.
Message was edited by: StarDeb55

Ipod nano 3rd gen. video download question

Hi All,
I tried adding a movie video to my ipod nano (3rd gen) and it took up the space when I synced it but when I ejected and went to find it on my ipod it wasn't there. There was no video file to find but the space was indeed used. My husband has a Ipod classic and the same movie synced onto his ipod and my daughter has the ipod nano 4th gen and she was able to view movie also. Is the 3rd Gen nano not video compatible? Thanks in advance for your help in this matter.

It's as compatible as the 4G version; I think you just had bad luck. If you can't find & delete the (large) file, you'll have restore and start over.

Ipod nano 3rd gen. some albums have suddenly disappeared from ipod, but they are showing as ticked on itunes library, have bought more tracks since on itunes and they are showing, any help please

ipod nano 3rd gen - tracks (whole albums) have disappeared from ipod but are showing ticked in itunes library and ipod is synched, have bought tracks from itunes since this happened and they are fine, any help please

You may have transferred all your songs, but your iPad is seeing the library as a different entity.
The following article(s) may help you.
Moving your iTunes library to a new computer

Ipod nano 3rd Gen not recognized by itunes or windows 7

USB device not recognized.
things I have done
put Ipod in disk mode still didn't recognized
My Ipod Classic 6th Gen works fine
It shows 3 Mass Storage Device
when I plug in Ipod nano 3rd gen it shows unknow device
have deleted Mass storage devices and Apple Moble Devices
unpluged computer from wall
nothing solving problem
I also tried it on my laptop its not being recognized
my wife Ipod nano is doing the same thing as mine
its got to be the software download from itunes because it has worked on all previous versions.

I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
I have tried resetting, I have tried downloading newest Itunes.
Must be the Nano itself if it doesn't get recognized by mutliple PCs?
I haven't used the Nano for probably 2 months. Previously it worked fine...
One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
Thanks,
Global_mongrel

Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

My PC Shuts Down When I Plug In My New IPod Nano 3rd Gen.

The title of this post pretty much says it all. Got me my new iPod Nano 3rd gen. yesterday. Brought it home, booted up the puter, loaded iTunes and plugged that sucker in. Well first iTunes kindly instructed me that I would have to download it's newest software, which I did.
Then soon afterwards when I thought i was set, I plugged in my new 3rd gen iPod Nano to the pc and as soon as I did that my pc shut down completely, and restarted. Shut down is putting it mildly, I mean it just went 'kablink" and then was restarting.
I tried uninstalling iTunes, cleaning my temp folder, my internet cache, then reinstalling iTunes anew, still nada. All to no avail, people, because each and everytime I plug in my new iPod Nano, no sooner than i do this my pc summarily goes "kablink" on me and starts booting up again.
NOW I STILL have my iPod Nano 2nd gen, and it works fine, even with the newest iTunes software, it doesn't screw up my pc like the new 3rd gen iPod Nano does.
Now I am to conclude that the problem lies in the 3rd gen iPod itself. How could it not? My iPod Nano 2nd gen works absolutely fine, and everytime I plug in my new iPod Nano, I shut down in a flash withtout fail. Anyone of you have this error? I would love to know short of calling iTunes tech support about what to do about this, this is a MAJOR bummer for sure. Now I have to be concerened about whether or not I am ever going to get this thing to work now.
Is the iPod broken? If not why the shutdowns then? Please advise. Many thanks in advance.

Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

Ipod nano 3rd gen (click wheel)

I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
Thanks.

Clickwheel games are no longer available in the iTunes store. Sorry.
B-rock

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Cannot find iPod nano 3rd gen in iTunes

My iPod nano 3rd gen is recognized by Finder in mac OS but not shown in iTunes for sync

Howdy Andrea.Betti,
Thanks for using the Apple Support Communities.
In order to resolve this issue where you're not seeing the iPod in iTunes, please follow the steps in the article below.
If you don't see your connected device in iTunes for Mac - Apple Support
Have a good one,
Alex H.

IPod Nano 3rd Gen Issues: would be grateful for any help

Dear all,
I recently purchased an iPod Nano 3rd Gen for my wife. I have been using a mac for 7 years, still have my first iPod 5GB scroll wheel as well as a 60 GB iPod video 5.5 Gen.
Here's what's happening.
iPod Nano connected via dock (which is in a USB hub...could that cause problems?)
Connect, sync, no worries.
Update iPod Nano software to 1.0.2.
iPod then, halfway through syncing, flashes the Apple Logo every 6-7 secs and then does the same again.
It is not recognised in iTunes like that.
Any help?
A hopeful Dan

Hi,
Same thing just happened to me - I have put the Nano 3G into disk mode (hold Menu and Select for 10 seconds then immediately hold Play/Pause and Select).
Just doing a factory restore now, that should bring it back to a brand new state and will try again from there.

Vertical line on my ipod nano 3rd gen?

Yesterday my ipod was fine, last night i added some songs to it and then after when I was listening to music i noticed a very tiny vertical line up top above the title of the song playing.. it didn't look too out of place so i thought maybe i'd just never noticed it before.. but then this morning when i get up theres a line from top to bottom.. and i can't find support or topics about this (on an ipod nano 3rd gen) anywhere.. so far its playing the music but.. it doesn't seem right so i'm not sure if anyone else has had this? or what i should do? please help!

http://www.apple.com/support/ipod/five_rs/nano3gen/#

IPod Nano 3rd Gen Corrupted File

Similar Messages

Maybe you are looking for