IPod Nano 3rd Gen. Problems [Rebooting, Won't Sync Contact/Calendar Data]

I have noticed that my iPod nano will reboot itself after it has been syncing/charging. It reboots when I go to the last playlist that was playing before I began to sync/charge it. Also, it would randomly reboots when I am selection a playlist.
Then, it won't sync my contact/calendar data if it nearly full. But I can sync them when it is nearly empty.
What is causing the problem and how can I fix it?

if you have done restores then possibly it is a firmware issue... i would take it to the apple store if you can to get it looked at...

Similar Messages

  • IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

    I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
    Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
    I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
    Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
    Thanks,
    Global_mongrel

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • TS1425 I have the updated version of iTunes and a brand new iPod Nano 3rd Gen. It will not sync and is not recognized by iTunes.  What's wrong

    Just received new iPod Nano 3rd Generation 4GB today. Have new notebook computer for 3 months with latest version of iTunes.  New iPod Nano is not recognized by iTunes and cannot do a darn thing with it.  All I want is my music.  What is the problem and how do I fix it?

    Start by working through all of the troubleshooting suggestions here.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Have you been having problems with ipod nano 3rd gen?

    Have you been having problems with your ipod nano 3rd gen? got a windows xp computer? is your pc not recognizing it? I think i may have the solution. After 2 2 hour calls to apple tech support they were stumped. we reset it again and again, reinstalled itunes again and again. and they had no solution for me. I went to my device managerand there was a device called (apple Ipod USB driver) with a yellow exclamation point. I tried updating driver but to no avail. I tried uninstalling and reinstalling and nothing. But then I had an epiphany. I went to the device manager right clicked the apple ipod usb device clicked properties then update driver. Hardware wizard went up and I chose not to install automatically. and i chose to install driver manually. and then I installed a generic usb mass storage driver in its place and presto!!! it worked! it was instantly recognized by itunes and it took me to the registration page. I did what the apple support team wasn't able to do for 4 hours. I wonder if they're accepting applications... Anyway i hope this helps anyone out there cause i know i went through a lot of stress.

    the driver is just a regular usb mass storage driver. it's in your computer. it's just a matter of installing it manually where it saya to include the location of the driver click browse and choose c:\windows\system32

  • IPod Nano 3rd Gen won't play AIFF files from Logic Pro 9

    Hi, so I've bounced a few tracks I was working on in Logic pro 9 as AIFF files, imported them into iTunes and then synced them down to both an iPod Touch 2nd gen and this iPod Nano 3rd Gen. The tracks play fine on the iPod Touch, but on the Nano, when I try to play a track, it shoes the "player" screen for a second, but it always bounces back to the track listing.
    According to the iPod Nano 3rd gen spec sheet, it does support AIFF files:
    http://support.apple.com/kb/SP14
    Any idea as to why this is happening?
    Also, I'm on Mac OS X 10.6.4, iTunes 9.2 and I reset the iPod nano just before starting this whole project.
    I'd like to keep the tracks in AIFF if possible...

    Greetings WonderfulT1,
    If you are having an issue with being unable to start your iPod nano when it is not connected to the computer, I would suggest that you troubleshoot using the steps on this page - 
    Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • My Ipod Nano (3rd Gen) won't sync with Itunes. Help!

    My Ipod nano 3rd gen stopped syncing with my Itunes for some reason. I switched the cords and it still doesn't sync. It doesn't even show the little lightning bolt on the battery and more.

    CORRECTION IT IS A 4TH GEN.

  • Ipod nano 3rd Gen not recognized by itunes or windows 7

    USB device not recognized.  
    things I have done
    put Ipod in disk mode still didn't recognized
    My Ipod Classic 6th Gen works fine
    It shows 3 Mass Storage Device
    when I plug in Ipod nano 3rd gen it shows unknow device
    have deleted Mass storage devices and Apple Moble Devices
    unpluged computer from wall
    nothing solving problem
    I also tried it on my laptop its not being recognized
    my wife Ipod nano is doing the same thing as mine
    its got to be the software download from itunes because it has worked on all previous versions.

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • My PC Shuts Down When I Plug In My New IPod Nano 3rd Gen.

    The title of this post pretty much says it all. Got me my new iPod Nano 3rd gen. yesterday. Brought it home, booted up the puter, loaded iTunes and plugged that sucker in. Well first iTunes kindly instructed me that I would have to download it's newest software, which I did.
    Then soon afterwards when I thought i was set, I plugged in my new 3rd gen iPod Nano to the pc and as soon as I did that my pc shut down completely, and restarted. Shut down is putting it mildly, I mean it just went 'kablink" and then was restarting.
    I tried uninstalling iTunes, cleaning my temp folder, my internet cache, then reinstalling iTunes anew, still nada. All to no avail, people, because each and everytime I plug in my new iPod Nano, no sooner than i do this my pc summarily goes "kablink" on me and starts booting up again.
    NOW I STILL have my iPod Nano 2nd gen, and it works fine, even with the newest iTunes software, it doesn't screw up my pc like the new 3rd gen iPod Nano does.
    Now I am to conclude that the problem lies in the 3rd gen iPod itself. How could it not? My iPod Nano 2nd gen works absolutely fine, and everytime I plug in my new iPod Nano, I shut down in a flash withtout fail. Anyone of you have this error? I would love to know short of calling iTunes tech support about what to do about this, this is a MAJOR bummer for sure. Now I have to be concerened about whether or not I am ever going to get this thing to work now.
    Is the iPod broken? If not why the shutdowns then? Please advise. Many thanks in advance.

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • Ipod nano 3rd gen (click wheel)

    I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
    Thanks.

    Clickwheel games are no longer available in the iTunes store.  Sorry.
    B-rock

  • IPod Nano 3rd Gen Issues: would be grateful for any help

    Dear all,
    I recently purchased an iPod Nano 3rd Gen for my wife. I have been using a mac for 7 years, still have my first iPod 5GB scroll wheel as well as a 60 GB iPod video 5.5 Gen.
    Here's what's happening.
    iPod Nano connected via dock (which is in a USB hub...could that cause problems?)
    Connect, sync, no worries.
    Update iPod Nano software to 1.0.2.
    iPod then, halfway through syncing, flashes the Apple Logo every 6-7 secs and then does the same again.
    It is not recognised in iTunes like that.
    Any help?
    A hopeful Dan

    Hi,
    Same thing just happened to me - I have put the Nano 3G into disk mode (hold Menu and Select for 10 seconds then immediately hold Play/Pause and Select).
    Just doing a factory restore now, that should bring it back to a brand new state and will try again from there.

  • Mac ipod nano 3rd gen - to windows xp

    Hey every body,
    I currently own a ipod nano 3rd gen. I however have mbp at home(where the nano is registerd) Till yesterday i saved a file on my nano. Tried opening the file today on the pc. However it does not come up. It says that the nano is not formatted. Anyone know how i can access this file?

    As far as I know you can't. A PC can't read a Mac-formatted iPod is the problem.
    If you have to use the Nano on both OS, you will have to have the Nano in PC format. A Mac can read a PC formatted iPod, but not the other way around, as I said above.
    Message was edited by: StarDeb55

  • Driver for Ipod Nano 3rd Gen

    Hi
    Just brought Ipod nano 3rd gen and plugged it into PC. It is not able to install properly - computer says it can't find driver. Any ideas how to resolve this?

    I am having the same issue here.
    OS: Vista ultimate 64-bit
    iTunes: 7.6.0.29 (64-bit)
    iPod: Nano 8gb 3rd gen
    I currently have a 60gb iPod Photo that works flawlessly. I bought the Nano tonight, brought it home, and charged it up. Plugged it in, and now Windows Vista is asking for drivers for the Nano. Doesn't recognize the Nano at all.
    The Nano knows it's plugged in, and is giving me the "eject before disconnecting" screen. However, Vista wants drivers, and iTunes doesn't recognize the Nano is connected whatsoever.
    Can someone please shed some light on this for us? Thanks.
    [edit] Yes, I have reset the Nano. Yes, I have uninstalled iTunes, rebooted and re-installed iTunes. Yes, I also tried putting the Nano into Disk Mode manually and connecting it to the system, but the system still wants drivers....
    [edit2]And yes, I'm using the administrator account on the system, too.

  • How long will a 5 year old iPod Nano 3rd gen's battery last?

    Hello,
    I am thinking about buying a used mint green iPod Nano 3rd gen off of ebay. I was wondering how long the battery would last?
    Thanks,
    themiz

    i found this from another user and it worked for me!
    I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all. Mine is also refurbished.
    I called Support and the automated phone person gave me these steps:
    1. Plug the iPod into the computer
    2. Set it down on a flat surface
    3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
    It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!!

  • Ipod nano 3rd gen.  some albums have suddenly disappeared from ipod, but they are showing as ticked on itunes library, have bought more tracks since on itunes and they are showing, any help please

    ipod nano 3rd gen - tracks (whole albums) have disappeared from ipod but are showing ticked in itunes library and ipod is synched, have bought tracks from itunes since this happened and they are fine, any help please

    You may have transferred all your songs, but your iPad is seeing the library as a different entity.
    The following article(s) may help you.
    Moving your iTunes library to a new computer  

Maybe you are looking for

  • Memory modules not working on HP Touchsmart 600-1050sc desktop - update BIOS ?

    Hi I just bought 2 x 4GB DDR3 PC3 12800 memory modules from Cruical (see http://eu.crucial.com/eur/en/touchsmart-600-1050sc/CT5311446) The modules does not work on my HP Touchsmart 600-1050 sc desktop. Acc to HP specs it should support 2 x 4GB (max 8

  • For all who are facing restarts and battery proble...

    I now have N8 with Anna perfectly working without tweaking (except for wifi scanning) any settings without battery life issues and no spontaneous resets.. Soln 1 : Go to post 31 in this  thread /t5/Nseries-and-Symbian-Smartphones/Anna-Battery-Consump

  • Hi to all... What is a  XML data provider,stored Procedure, personal data

    Hi to all... What is a  XML data provider,stored Procedure, personal data providers in deski.  when we use these data provider in desk top intelligence.. and use of it. Please give detail description of the above... Thanks for reply..........

  • Change document

    I learn the procedure for change document from sap hlep: 1.Define change document object 2.Set change document flag 3.Generate update and INCLUDE objects 4.Integrating the functionality into the program 5.Writing the fields in the program I'm confuse

  • LGWR: Archivelog for thread 1 sequence 9339 will NOT be compressed

    Following is a meesage in db01_lgwr_9265.trc *** 2007-08-03 05:37:19.254 LGWR: Archivelog for thread 1 sequence 9335 will NOT be compressed *** 2007-08-03 05:52:38.565 LGWR: Archivelog for thread 1 sequence 9336 will NOT be compressed *** 2007-08-03