IPod Nano 3rd Gen stuck in diag mode

I have an iPod Nano 3rd Gen stuck in diag mode. I have reset it multiple time using the select button and the menu button with it pluged in to the wall, into the computer and not plugged in at all. I reset it using the reset option under power and nothing. Please, can someone help?
Thanks

OK.  My first time seeing this thread so hopefully you'll share your success results with me.
Here is the issue:
1) iPod Nano 5th gen stuck in Diags Ver: N33GreatDane2A45bp
2) When I rest by choosing Reset from the Diags Power sub-Menu it boots and brings up the white Apple logo and back to Diags menu
3) If I reset by holding down Menu button and Center button, same thing happens: Apple logo followed by Diags menu (It flashes iPod Display Console)
4) So I am always stuck in this loop.
5) Can't restore from iTunes since the iPod is never recognized in iTunes.
Thoughts anyone?

Similar Messages

  • IPod nano 4th gen stuck in dfu mode.

    I have a problem with my son's iPod Nano 4th Gen.
    When I try to restore the iPod in iTunes it gives the error 1601 and says it doesn't recognise the iPod.
    When connected to my laptop without iTunes it says 'usb DFU device'.
    I have tried every combination of buttons, before anyone tells me to 'just hold in menu and select'.
    I can't get the iPod out of DFU mode to restore. Any help is much appreciated.

    Bump

  • IPod touch 3rd gen stuck in recovery mode and iTunes cannot fix it

    i have an ipod touch 3rd generation with firmware 4.3.4. i was recently playing an app whe all of the sudden my ipod just shuts off. i held the power button but it would not turn on. then i tried just holding and pressing and holding the power and home button on my ipod touch trying to get it to turn back on. eventually the apple logo appeared and i felt relieved. however the usb and itunes screen popped up so i plugged my ipod touch into my computer and tried to restore it. when i plugge my ipod touch in a message popped up telling me that my ipod touch was in recovery mode and had to be restored. so i clicked on restore and waited for my ipod to restore. then another message popped up. it said that my ipod was not approved from apple to be restored. i had no idea what was going on so i did some research. i found that other people have seen an error pop up but with an error number. my error displayed no error number. i thought to myself that that was strange so i tried to restore my ipod agian. then i realized when i clicked on my ipod in itunes that my ipod summery was wierd. the name of my ipod was ipod and the capacity and serial number etc. said n/a. what is wrong with my ipod and how do i fix it? i miss my ipod.

    ok hit the level down sound home and power button at the same time happen to me to really anoying

  • IPod Nano 4th gen stuck in recovery mode

    I have an iPod Nano 4th generation that I got from my sister. It worked fine the other day when I got it, and I restored it to my iTunes account with no issues. A day later, I try to turn it on and the screen stays black. I plugged it into my laptop (Windows XP) to restore, and it tells me it needs to be prepared for recovery. I click OK and the iPod beeps 4 times. It goes through the restore process just to do the same thing again. I tried it on another computer (Windows 7) at home and a Mac at work. Nothing works, it just beeps and stays in the recovery loop. I've tried everything I can find online- the 5 R's, changing the drive letter, formatting it, disabling antivirus software, etc. None of it works. I can't even boot the iPod into the diagnostics menu.

    Bump

  • My iPod nano 3rd gen is stuck in a restore loop.

    My iPod nano 3rd gen is stuck in a restore loop.  I have wiped it with Disc Utility and attempted to restore with iTunes, but there was no effect. I checked it in diagnostic mode against an identical pod and found no significant differences in the results, both checked out fine.  I know that this is not a windows driver issue since I use a mac.  In any case such an issue should have been resolved when I wiped the pod.  I have not attempted to load any music on it or sync my library, so a corrupted file seems unlikely as well. there is no water damage and the case is in excellent condition.  I have no idea whats wrong with it so any help or suggestions would be appreciated.

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • Ipod nano 3rd Gen not recognized by itunes or windows 7

    USB device not recognized.  
    things I have done
    put Ipod in disk mode still didn't recognized
    My Ipod Classic 6th Gen works fine
    It shows 3 Mass Storage Device
    when I plug in Ipod nano 3rd gen it shows unknow device
    have deleted Mass storage devices and Apple Moble Devices
    unpluged computer from wall
    nothing solving problem
    I also tried it on my laptop its not being recognized
    my wife Ipod nano is doing the same thing as mine
    its got to be the software download from itunes because it has worked on all previous versions.

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod Nano 3rd Gen Issues: would be grateful for any help

    Dear all,
    I recently purchased an iPod Nano 3rd Gen for my wife. I have been using a mac for 7 years, still have my first iPod 5GB scroll wheel as well as a 60 GB iPod video 5.5 Gen.
    Here's what's happening.
    iPod Nano connected via dock (which is in a USB hub...could that cause problems?)
    Connect, sync, no worries.
    Update iPod Nano software to 1.0.2.
    iPod then, halfway through syncing, flashes the Apple Logo every 6-7 secs and then does the same again.
    It is not recognised in iTunes like that.
    Any help?
    A hopeful Dan

    Hi,
    Same thing just happened to me - I have put the Nano 3G into disk mode (hold Menu and Select for 10 seconds then immediately hold Play/Pause and Select).
    Just doing a factory restore now, that should bring it back to a brand new state and will try again from there.

  • Driver for Ipod Nano 3rd Gen

    Hi
    Just brought Ipod nano 3rd gen and plugged it into PC. It is not able to install properly - computer says it can't find driver. Any ideas how to resolve this?

    I am having the same issue here.
    OS: Vista ultimate 64-bit
    iTunes: 7.6.0.29 (64-bit)
    iPod: Nano 8gb 3rd gen
    I currently have a 60gb iPod Photo that works flawlessly. I bought the Nano tonight, brought it home, and charged it up. Plugged it in, and now Windows Vista is asking for drivers for the Nano. Doesn't recognize the Nano at all.
    The Nano knows it's plugged in, and is giving me the "eject before disconnecting" screen. However, Vista wants drivers, and iTunes doesn't recognize the Nano is connected whatsoever.
    Can someone please shed some light on this for us? Thanks.
    [edit] Yes, I have reset the Nano. Yes, I have uninstalled iTunes, rebooted and re-installed iTunes. Yes, I also tried putting the Nano into Disk Mode manually and connecting it to the system, but the system still wants drivers....
    [edit2]And yes, I'm using the administrator account on the system, too.

  • Ipod nano 3rd gen.  some albums have suddenly disappeared from ipod, but they are showing as ticked on itunes library, have bought more tracks since on itunes and they are showing, any help please

    ipod nano 3rd gen - tracks (whole albums) have disappeared from ipod but are showing ticked in itunes library and ipod is synched, have bought tracks from itunes since this happened and they are fine, any help please

    You may have transferred all your songs, but your iPad is seeing the library as a different entity.
    The following article(s) may help you.
    Moving your iTunes library to a new computer  

  • My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes

    I'm tring to convert video from Youtube to play on my ipod nano 3rd gen.  When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
    What do I do?  I tried Real player converter too - no luck.

    I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
    B-rock

  • IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

    I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
    Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
    I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
    Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
    Thanks,
    Global_mongrel

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • My PC Shuts Down When I Plug In My New IPod Nano 3rd Gen.

    The title of this post pretty much says it all. Got me my new iPod Nano 3rd gen. yesterday. Brought it home, booted up the puter, loaded iTunes and plugged that sucker in. Well first iTunes kindly instructed me that I would have to download it's newest software, which I did.
    Then soon afterwards when I thought i was set, I plugged in my new 3rd gen iPod Nano to the pc and as soon as I did that my pc shut down completely, and restarted. Shut down is putting it mildly, I mean it just went 'kablink" and then was restarting.
    I tried uninstalling iTunes, cleaning my temp folder, my internet cache, then reinstalling iTunes anew, still nada. All to no avail, people, because each and everytime I plug in my new iPod Nano, no sooner than i do this my pc summarily goes "kablink" on me and starts booting up again.
    NOW I STILL have my iPod Nano 2nd gen, and it works fine, even with the newest iTunes software, it doesn't screw up my pc like the new 3rd gen iPod Nano does.
    Now I am to conclude that the problem lies in the 3rd gen iPod itself. How could it not? My iPod Nano 2nd gen works absolutely fine, and everytime I plug in my new iPod Nano, I shut down in a flash withtout fail. Anyone of you have this error? I would love to know short of calling iTunes tech support about what to do about this, this is a MAJOR bummer for sure. Now I have to be concerened about whether or not I am ever going to get this thing to work now.
    Is the iPod broken? If not why the shutdowns then? Please advise. Many thanks in advance.

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • Ipod nano 3rd gen (click wheel)

    I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
    Thanks.

    Clickwheel games are no longer available in the iTunes store.  Sorry.
    B-rock

  • Cannot find iPod nano 3rd gen in iTunes

    My iPod nano 3rd gen is recognized by Finder in mac OS but not shown in iTunes for sync

    Howdy Andrea.Betti,
    Thanks for using the Apple Support Communities.
    In order to resolve this issue where you're not seeing the iPod in iTunes, please follow the steps in the article below.
    If you don't see your connected device in iTunes for Mac - Apple Support
    Have a good one,
    Alex H.

Maybe you are looking for