IPod Nano 4G Corrupt?

My iPod Nano 4G has been working fine up until now. When I connected it to my laptop to charge it, a message popped up in iTunes that said
'iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.'
A message from Windows also came up that said
'You need to format the disk in drive H: before you can use it.
Do you want to reformat it?'
Please help! I have no idea what to do. I tried restoring it, and that did nothing. I also tried connecting it to a different port and that also did nothing.

Have you tried pressing the centre and menu buttons for approximately 10 seconds to reboot the iPod?

Similar Messages

  • Ipod nano is corrupted.

    the first time i plug it into my computer it says i need to format it to be used with windows, so i do that. Afterwards i get an error message saying i need to format my pod because it is corrupt, and i keep getting that no matter how many times i format. The ipod worked fine on an apple laptop though, just not on my windows (vista) computer.

    Have you tried connecting to iTunes and restoring it to factory settings?
    Restoring iPod to factory settings
    B-rock

  • My imac says my ipod nano is corrupt

    hey guys for some reason
    when i now plug my ipod in to my apple imac it for some reason says its corrupt and yet it works fine
    could it be because ive used it in my windows based pc and thats why
    any help guys
    cheers
    jason
    by the way my imac spec is
    Imac G4 2ghz 1gb ram and 250gb hd with mac osx leopard
    thanks

    Have you got the latest version of everything? If you don't and the problem still persists, then plug your iPod into the iMac and run repair permissions on the iPod from Disk Utility.

  • Ipod nano with corrupt file  HELP!!!!!!!

    I can only listen to songs already loaded. I cannot load anymore or delete any. I get a message that says
    "iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod." It won't let me restore, it comes up with the same message. What can I do? I'm so new to all of this, HELP

    Ok. Soory about that. Ok, I get that you were responding, but apparently it is still easy to get mixed up.
    I mean, I understand that you are trying to help (which your post actually does do, for Stasik's post), but it still had some attitude. I understand that you did not mean to have it be like that, so yeah. Plus, keep in mind I was really tired when I made my post, so when I am like that I am not particularly coherant (haha).
    So, sorry for any misunderstanding, and whatever.
    My post was aimed at 5carrs, the original poster, not Stasik.
    Sorry for the misunderstanding! I hope we can continue on on a good note from now on! (I used on 3 times in one sentence...new record, haha).

  • ITunes unable to detect iPod nano

    well, my iPod nano was working fine until yesterday when i did the iTunes update. After I went through with the iTunes update, it prompt me to update the program in my iPod nano. I thought it was supposed to help in making my life easier but it turns out to be otherwise. 1 min into the update, it started giving me error messages and finally end with a message saying files in my iPod nano are corrupted. Now, despite repeated attempts to reset nano and reinstall iTunes, iTunes is still unable to detect nano. I really need some help with this problem.

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Still no joy, see these.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    Put it into disk mode first.
    Putting iPod into disk mode.

  • ITunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other.

    iTunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other. Is the port faulty? Windows 7 PC

    Could just be a loose connection or that the cable itself is going bad.  There are a number of factors that could play into this scenario.
    B-rock

  • Ipod nano - cant restore - firmward file corrupt

    my ipod nano (1st generation)was originally formatted for a mac, and I need to perform a restore because my main computer is now a pc.
    However, when I try to restore the ipod I get an error message saying that the firmware file is corrupt..I have followed the instructions for fixing this problem(remove the apple updates folder in /spplications etc), but I cannot find that folder, even after showing hidden files. I found a program of a similar name in my program list called 'apple updates', which I tried to uninstall but again got an error message.
    Please help! cannot update, add, change songs etc on my ipod

    Okay...got mine working...here is what i did....uninstalled and reinstalled both Itunes and quicktime on my computer. Still wouldnt work, still locked up my computer. I found another computer that had an older version of itunes on it...connected my ipod to it, and it finally restored my ipod settings. Took it home to connect it to mine, and it worked. Hope this helps anyone else out...Especially since this seems to be a reoccurring problem that Apple isnt taking care of. good luck

  • My iPod nano needs to be format, but it doesn't format using fat 32. And it says that it is corrupted. What should I do?

    My iPod nano needs to be format, but it doesn't format using fat 32. And it says that it is corrupted. What should I do?
    As I connect it to itunes, it shows that it needs to be format. When I try to format it (fat32) it doesn't finish. And it says, the ipod appears to be corrupted.

    similar to what is happening to me....the difference is, after restoring itunes detect ipod and ask to restore again and again....
    I know it may look kinda stupid but: just leave the ipod there for about 2 minutes, that's about the time my itunes is taking to detect my ipod...if it doesn't work, try connecting ur ipod to other computer with itunes (no need to sync, just to check if itunes will recognize) to check if the problem is with the ipod or with the itunes and/or computer.

  • HT1339 I have an IPOD Nano 4th Generation 8GB and need to restore to factory settings as want to sell it; however it will not reset and when plugged into my MAC it says firmware corrupt? CAn anyone shed light on what i can do to overcome this issue?

    I have an IPOD Nano 4th Generation 8GB and am unable to restore it back to factory settings even when it is connected to my MAC.  I have tried the menu/select hold but is not doing anything.  When connected to the MAC and select restore in itunes it comes up with 'Firmware Corrupt'.  It also states the IPOD is up to date.  I have the latest operating system on my MAC and wonder if this may be part of the issue?
    Can anyone shed light as to what i can do to reset it back to factory settings as would like to sell it and ensure it is ready for the new owner.
    Thanks
    jay68g

    See here: What to do if iPod can't be updated because the firmware file was corrupt or not found
    B-rock

  • Corrupted ipod nano 1st gen

    I have a corrupted Ipod nano 1st gen... and restoring the nano wont work at all... I cant find a single way to fix it...

    it shows a folder with a yellow triangle with a exlamation mark next to it and it also shows something saying corrupt on the bottom and the apple website on the bottom

  • How do you fix a corrupt ipod nano 4th gen

    how do you fix a corrupt ipod nano 4th gen?

    Hi bigmike94610,
    Welcome to the Apple Support Communities!
    For iPod nano troubleshooting I would suggest the troubleshooting outlined in the following web link. I would suggest working through the steps in the order presented on the website, but you may ultimately need to restore your iPod. 
    Apple - Support - iPod - iPod nano (4th generation) Troubleshooting
    Best regards,
    Joe

  • Corrupt file error - ipod nano (HELP!)

    Each time that I put a new CD into my computer and add it to my iTunes library so that I can transfer the songs onto my iPod nano I get a "corrupt file" error message relating to my iPod and I also get a pop-up asking me to register my iPod even though I've done this already. This happened again yesterday and this time ALL of the songs on my iPod were erased! I don't know what the problem is and why I'm getting this "corrupt file" message. I need help - does anyone know what I can do?

    hiya!
    I get a "corrupt file" error message relating to my iPod and I also get a pop-up asking me to register my iPod even though I've done this already.
    it's plausible here that you're getting the drive-confusion-related version of the chkdsk (based on the fact that you're constantly getting the iPod setup assistant).
    see:
    Da Gopha: chkdsk errors
    and:
    Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear
    love, b

  • IPod nano Software Download - Files are corrupt

    Just purchased an iPod nano. Tried to install the software. When it reached the iTunes portion it flashed a message that "Some installation files are corrupt. Please download a fresh copy and retry the installation." I went to the website and did that. Results were the same. Ideas?
    Gateway   Windows XP  

    There is a simple solution to your problem:
    INSTALL WINAMP & PLUGIN
    The plugin can be found here
    http://sourceforge.net/project/showfiles.php?group_id=106528
    They also have a Tutorial (which I did not need)
    http://www.mlipod.com/?page=documentation
    This solution is for free (I mean the software of course ...

  • IPod nano corrupted iPhoto thumbnails?

    After syncing my photos for the first time with my iPod nano, I have a number of thumbnails in iPhoto that show up as blank, and iPhoto seems to have a hard time scaling pictures in general. Rebuilding the library has not helped. Has anyone else had this problem?
    Thanks!

    Hi bob,
    I don't think any update to the iPod software will put your iPhoto library back together again. (By the way, there is an update to the iPod software)
    I suggest you navigate through the iPhoto Library folder in the Finder and see if the images are still there. If they are and you can open them with Preview, the images are fine.
    I also suggest for you to create a new library and import/add to the library the images from the corrupt library. I will tell you ahead of time that this will import all your images in dated rolls, but you will have to redo albums, keywords, slideshows, books, etc.
    Instructions:
    Drag old iPhoto Library to the desktop
    Launch iPhoto
    Create new library and name it at the prompt
    Go to File/add to library
    Navigate to the library on the desktop and choose it
    Let iPhoto import your images.
    More details on what will happen on Page 2, #2
    iPhoto Help
    iPhoto Help 2
    good luck if you should decide to do this.
    You might also want to export just the images you want on the iPod nano to another folder in your Users folder and use this folder as the sync folder. You would do that within iTunes when you mount the iPod, click on the iPod icon on the bottom right and go to the correct place to change the location of images to sync

  • Can I get music off a corrupted/broken ipod nano at the apple store?

    My Ipod nano had a cracked screen soon after I first got it and the screen was replaced.
    My second Ipod nano screen began lifting up in the corner awhile ago, I thought nothing of it until it snagged on a persons clothing and tore the wire ribbon, taking the screen clean off.
    As I ran out of space on my old computer, I had to delete all of my music, the ipod was the only way that I stored it, I tried to connect the broken ipod to my new computer to get my music back but it now claims to be corrupted.
    If I take it to a store, will they be able to get my music off and onto a pen drive for me? how much will this cost?
    The ipod has no warranty due to being a replacement for a fire hazard first generation nano.

    No, if you are getting a message that the iPod is corrupted there is no way to retrieve your music.

Maybe you are looking for

  • MY PHONE WON'T CONNECT TO BT OPENZONE FON BECAUSE OF BLANK POP UP PAGE

    Hi I have an iPhone 5 and I am trying to connect my phone to BT Openzone FON When I try to connect to the network a pop up appears where I have to fill in my details so I am able to use the internet connection But for a while now whenever the pop up

  • How to upload External Voucher?

    Hi, I got a work regarding "Voucher upload for Recorded Payments" Requirment: To allow the voucher upload process to pass the recorded payment information into PeopleSoft and create pre-approved, manual recorded vouchers. How:Utilize the existing PYM

  • I can't update my Premiere Pro CC 2014 8.01 Version to 8.1 on my mac...???

    I try to update my Premiere 8.01 to 8.1 on my Mac Pro Workstation with 10.8.5 OSX. Creative Cloud only install the 8.01 version. I tried to uninstall and reinstall with updates but it will alway only give me the 8.01 version and not the new one...???

  • FAQ: How do I go about learning Flash Pro?

    Because of the many different ways of using Flash Pro, and the overabundance of learning materials for it, knowing where to start is a challenge in itself. Here's what we recommend: The Flash Pro Dev Center provides a guide called Five steps to learn

  • BLS, extract parts of an XML

    Hi. I may have asked before, but can not find the answer anywhere. I have an XML which I want to extract parts of. It this possible an how? I want to get the part /ns1:GetProductionSchedule /ns2:GetProductionSchedule /ns2:DataArea /ns3:ProductionSche