Ipod nano 4g pioneer DEH P9880BT

Hi,I am trying to connect my ipod to my pioneer car stereo deh p9880BT,i use the aux1 with a 3.5 mm jack,the problem is that for some wirred reason it peeks up the sound of my car engine,and weird i have to spray my windsheild 2-3 times every 10 minutes to make it stop,or try to hit in halls on the road,now i want to connect it with another way i have tried this http://i.seimg.net/images/19437/main/acc-ipodpio.jpg but when i connected it,(this time on aux2) there was no sound,i could hear the ipods inner speaker though,now i want to try this http://www.ebay.com/itm/PIONEER-CD-i200-CD-1200-iPOD-iPHONE-PAD-AUX-INTERFACE-AD APTER-CABLE-US-SELLER-/290676651061
is there another way,if someone knows?Or if someone cay say if they tried it and it worked or i am missing something..Thank you

Great sound quality, a plus that is charges from
there, I like that I can control everything from the
HU too but I get little to no text on the HU. The
first few letters of the playlist or genre and band
name, no song title or album titles.
Any have any experience with this? Is there a way to
revert control back to the iPod click wheel?
Thanks.
Shouldn't you be seeking information from the support sites
of the vendors involved? Reading the manuals is useful, too...
If your audio system has an auxiliary input consider using an audio patch cord between the audio out on the nano and the car system.

Similar Messages

New iPod nano 3rd generation with Pioneer idk 01

When I try to use my iPod nano 3rd, on my Pioneer dock IDK 01, I can not see video and photo on my TV, it seems not recognise mi dock like video accessorie. But dock IDK 01 have video cable composite or S Video.
Someone have same problem than me??

I'm using no adapter. It seats fine when you have aligned the plug/port correctly. I've gone back to a nano from an iPod (from a 2g nano) and wanted to get back to (a) carrying a smaller player and (b) not having to remove a player from its case before putting it in a dock (not that there's much in the way of cases for the 3g nano yet).
There IS a gap between the back of nano & the Logitech. I've been holding the top of the nano steady w/index finger and thumbing the wheel, which keeps it steady. When seated properly, the bottom of the wheel falls slightly below the front edge (between the speakers), which makes this move a little awkward.

Ipod nano 3g and Pioneer

I have a Pioneer car radio with ipod conection, it works OK, except that, when I play songs with this radio, ipod doesn't increment the number of times a song is played or skipped...
Is this a bug fix? Does it happen with all external players?
may it be fixed in next ipod firmware?

hmm...Might be a compatibility issue or hardware problem.
maybe they support older iPods not the new iPod Nano 3rd Gen.

For the iPod nano 1st gen replacement program what generation of iPod nano will it be replaced with?

For the iPod nano 1st gen replacement program what generation of iPod nano will it be replaced with?

8GB. Nice little unit when used by itself. BUT don't even think about connecting to any docks or other third party interfaces 'cause IT AIN"T GONNA WORK RIGHT!
Both of my Pioneer car stereos have the same problem with both of my 6th generation iPod Nanos:
The first time you connect the iPod, the radio recognizes the it and works. BUT THE NEXT TIME YOU TURN THE RADIO ON THE DISPLAY FREEZES. The only way to get it working is to disconnect the dock connector from the iPod and reconnect it. THIS ***** AND IS NOT THE WAY THESE UNITS BEHAVED WITH MY 1ST GENERATION NANO. Both of my new 6th generation ipods have been restored (several times) and have the latest firmware which, as of this writing is 1.2 and still the problem persists.
My two Pioneer car stereos that don't work right with the iPod Nano 6th generation:
Pioneer DEH-P4900iB
CD-i200 iPod cable for above
Scion XB iPod enabled head unit T1808
I've made an AppleCare adviser aware of the problem but I doubt that this information will ever make it to engineering so I don't have much hope that this will ever be fixed.
I would suggest that all 6th generation Nano users check it's compatibility with any third party interfaces they have and report their findings on this discussion board. Perhaps we can get Apple to FIX THIS SERIOUS PROBLEM.
Apple are you listening??

IPod nano 6th gen shuts down instead of Sleep

I've recently acquired an iPod nano 6th generation and it has an issue that's killing me inside: instead of turning off the screen, like the Sleep function, every one minute or so the iPod shuts down. It's not exactly the same as turning off completely, but everything I'm doing at the time stops, including music. The big deal is that this happens automatically, so it's nearly impossible to listen to anything. I've tried to press the Sleep/Wake button while listening to music, but it happens the same issue, even if the User Guide says it should be quite the opposite...
I don't think it's a battery thing because the battery is full and the iPod works normally as long as I keep touching the screen everytime. I gained it yesterday, so it's brand new. The only different thing I did was to use my own headphone (a Pioneer SE-MJ31) instead of Apple's, because I can't use earbuds. But if the music DOES play (and it does it well) then it's compatible, right? And it also doesn't seem that a headphone could cause this.
Does anyone had this same issue and/or knows what to do?
Thanks in advance

Make sure the headphones are plugged all the way in, meaning no silver from the headphone's plug can still be seen. You should hear a sort of clicking noise when inserted the headphones to signal that they have been fully seated. The white part of the headset should be flush with the body of the Nano.
B-rock

Info on JVC KD-HDR50 & Pioneer DEH-P3100UB

:smileyhappy:Hello I need help. I'm buying a radio for my car and I'm torned between JVC KD-HDR50 & Pioneer DEH-P3100UB.
Does either of these scroll the artist name and song name at the same time when using the Satellite mode (I have XM that I will be hooking up to this and I will be using this and my IPOD all the time I won't be listening to the radio)?Or is it only just the artist name or just the song name? Can it be easily switched back and forth with the touch of a button?
To give you an idea of what I'm looking for when buying:
Satellite radio
USB in the front
Cannot have flashy or bright colors because I will not be able to see when driving at night (very important for me)
The scrolling of text if possible I would like artist and song scrolling at same time but this is not as important as the lighting
I don't really care for the beeping sound when pressing buttons (would like to turn off if possible)
Price - under $200
If anybody has any suggestions or info it is greatly appreciated. I've been looking online and in the stores and reading lots of reviews and I just can't make up my mind. Thanks in advance!

Unless they've changed them, the front USB ports are only for flash drives. Otherwise you'll need to either go through the aux jack, or buy the ipod adapter.

Ipod nano white screen and not turning off

hi I bought a new mini pioneer stereo/dvd and put my ipod nano on it yesterday.. no probs it played.... but today i put it on the dock and all that it showed on the screen was a white screen with "ok to disconnect" on it... I took it off and now it is still a white screen adn flashing "Do not disconnect" I'm freaking out because I am not technically minded and my brother spent hours putting music on it for me
It is not turning off at all
eek
Thanks to anyone with time to help me

Hi
It seems to be ok now... I had to go out and it ran out of battery, when I switched it back on it appears to be fine.
If it happens again (hoping that it doesn't!) and i do the reset.. will that remove all the music that's on there?
Sorry for the ignorance
Thank you for the answer

IPod nano (4th gen) plays any song for 40 seconds, then stops

Strange behaviour from my 4th gen iPod nano:
1. When plugged into Logitech iPod dock, plays any song selected for 40 seconds, then stops. Hit play, it plays for another 40 seconds, then stops again. (Logitech iPod dock works fine with my wife's iPod nano.)
2. When plugged into the Pioneer car stereo, the car stereo reports that the iPod is in SET UP mode, which it never comes out of. (As above, car stereo has no problem with my wife's iPod.)
3. iPod nano is detected normally by iTunes and works normally when plugged into desktop computer.
4. iPod (and iTunes) software is up to date.
5. Resetting the iPod (Menu + Centre button hold) has no effect on either (1) or (2) above.
6. Help?
Steve

Update: Restore to factory settings does not solve this problem. I'm really stumped.

Is the ipod doc connector to usb cable the same as the cable that comes with the ipod nano?

I'm trying to play my ipod nano through a pioneer car stereo using the usb port and it is not working.

I don't know but I wouldn't plug it into the car again because it might not be compatable and my friend broke 2 iPodsom pluging them into a car.

IPhone won't work well with Pioneer DEH-5900IB Car Stereo

I have installed Pioneer DEH-5900IB recently and have connected my iPhone (firmware ver. 1.1.1) to this car stereo through Pioneer CD-I200 (interface cable for iPod). Then the iphone certainly asked me whether I want to switch to the airplane mode, and I said no. The music played immediately, HOWEVER the iphone could not charge (i.e. no lightening symbol), as well as 5900IB showed the message "error a0" with no playlist showing up. I could still change the song by using the navigation button (i.e. by clicking the wheel left or right side) though. Is there any possible solution to this problem?
I don't really want to connect the iphone to this car stereo via AUX, since the sound quality it could provide was obviously inferior to the direct connection through CD-I200.
Any suggestion, idea or even rumor on this will be really appreciated.
Thanks!
- SW

Hey swkim... I just spent an hour outside fiddling around with the iPhone/Pioneer and I think I may have found a temporary workaround... let me know if this works for you!:
With the car ignition on, and no iPhone attached to the CDi200 cord, for this first time only (to get out of the 'Error-A0' rut) reset the Pioneer reciever (on mine it involves pushing that small indentation with a pen on the front of the receiver). Hard-Poweroff your iPhone (holding the top button until the red slider comes up to power off the iphone and go ahead and turn the iphone off). The receiver should be on in its reset mode (ie. demo mode or whatever). Now, plug in the CDi200 cord into the powered-off iPhone. It should activate the iPhone. Don't press any buttons - just let it power up by itself. In 100% of the cases i've tried this way, the Pioneer Receiver will switch to the iPod state and stay in the Ready functional mode until the iphone fully boots up, and then it will start to play, charge and work normally without the dreaded error-A0!
Now - the trick to getting this to work each subsequent time without having to reset the receiver each time (because if we have to reset the receiver each time it would be pointless - our tuner settings are gone, possibly BTooth settings gone if your receiver has that option, etc):
When you're ready to stop the car or turn off the ignition, do so. Feel free to detach the faceplate, etc if necessary. the Iphone in the cases I tried were still attached to the CD-i200 cord as I turned off the machine. After the receiver powered off, I unhooked the CD-i200 cord from the iPhone. When I was ready to start it up again, I first turned on the ignition, hooked on the receiver faceplate, and allowed it to boot up (no need to 'reset' the receiver). The trick is though that I made sure the iPhone is now hard-powered off again before attaching it to the CD-i200 cord. Now, attach the powered-off iPhone to the cord. it will cause it to turn on and boot up again... but now (in 100% of the times I've tried so far), the receiver will now see it in its Ready state and will work!
Anyways, let me know if this works for you. If this does, it would suggest that the problem may be with how an iPhone left powered-on tells the receiver where to resume playing a song. The upside of this workaround is that it doesn't require a reset of the receiver each time (thankfully) and, while connected in a working state (ie. non error-A0 state), it also survives Source changes so one is free to change to the TUner mode, etc, and back to the ipod source. The downside though is that one has to hard-power off the iPhone each time before connecting it to the receiver (annoying but not a biggy for me as long as this works), and instead of resuming from the spot in the song last played, it starts from track1 since the iPhone was reset (also not a big deal for me). The other downside I found is that, if the order sequence of the above workaround is changed and I end up with an 'error-A0' message, then I have to go back and reset the receiver (annoying since I'd lose my Tuner settings, ?possibly my Equalizer settings, and ?possibly my BTooth device settings on my DEH-7900BT)...

IPod nano And Dension Ice Link Plus: no audio :(

Hi guys,
I've a very strange problem with my iPod Nano 4GB.
I've just installed the Ice Link Plus interface in my car and it seems working great (total control from OEM radio, carghe it, change the tracks from radio controls, ID3 on the screen, etc.) BUT...I'm not able to hear any music!!
yeah...the nano is totally mute :O
I've seen many post about this issue (with docking units, etc), but I've to say that:
- it worked perfectly with Pioneer CD-IB100 interface
- it works perfectly with my JBL On Stage
So, as suggested in Dension Knowledge-base, I've unplugged the ipod from dock connector, done a soft reset (MENU + Select) and reconnected it...but nothing. It doesn't play :'(
Then I've tried to plug the headphones, unplug them and then connect the dock...but nothing, it doens't play.
Saying that I'm going to try another iPod on that Dension to be sure tha the problem is in the iPod, do you have some suggestions?
Thx,
francesco

Try a reset of the Nano and if that fails try a restore from the iPod updater. There has been several posts related to lack of audio output on the Nano inconjuction with various accessories where a Reset or Restore corrected the problem.
To reset Nano, press and hold the Menu and Select buttons until the Apple logo appears. You should have to hold the buttons down for about 6 to 10 seconds.
To restore your Nano, download the latest iPod updater and install the application. Run the updater with your iPod connected and select restore. The updated can be download from --> http://www.apple.com/ipod/download/
Best Regards-
Randy

Iphone to Pioneer deh 7900?

Hi!
I have recently bought an Pioneer deh 7900 car sterio. When I am trying to connect my Iphone to it to play music from it, the pioneer dosnt find it, it just keeps saying " format read" and nothing is hapening, exept that the iphone is charging. The sterio shuld be ipod connecteble through the USB port. Whats wrong? do I need a CD-I200 cable to control my iphone? shudent it just go and go through the USB port and in to the iphone whith an regular ipod/iphone cable?

torva,
I did a little bit of research on [Pioneer's website|http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/DIN/DEH-P 7900BT] for that stereo, and it does say:
Attention current and future iPod owners: iPod control is now built-in your Pioneer receiver - once connected to the CD-I200 cable (not included), you can control your iPod through the headunit and even view album, artist, and other music info on its display.
So it does sound like you need that cable, but you would want to contact Pioneer for more information.
Hope this helps,
Jennifer B.

Problem connecting iphone to pioneer DEH-7950UB car stereo

HAllo
I have Iphone 2g 16GB fireware 2.2 and pioneer deh-7950ub that support
ipod.
the system have usb jack to connect the the ipod cable.
when I connect the iphone through the iphone cable the iphone is only charging and dont sync with the car system ?
can you help me solve the problem ?

someone ? please ?1

Nano with Pioneer cd-ib100

Is anyone using the Nano successfully with the Pioneer ipod adapter? I have a Pioneer AVIC-D1 with the ipod adapter but it doesn't seem to be displaying properly. I get only rudimentary navigation and no text display. I don't have any other ipods to test with the system.

I have no idea. I am going to contact Pioneer via telephone at 800-421-1404, technical assistance line 800-872-4159, and I am going to contact Apple via telephone at 800-275-2273.
The Pioneer CD-IB100 is for the iPod SERIES of devices, of which the Nano is included. It works as it is, but the interface is incorrect and the titles displayed only show eight characters. It's seen as a generic device "EXT-1". In the manual for the CD-IB100, it clearly shows that the iPod is to be shown as iPod in the function display, with an iPod icon on the touch screen.
Since the Pioneer CD-IB100 is NOT flash upgradable, it would take a software update to the iPod Nano to fix this issue.

I am trying to use itunes, it will not open at all, have uninstalled and downloaded new software and 64bit for windows. i have an old ipod nano from about 5 years ago. anything i can do, even to view my purchases and watch/listen to music etc?

ok i have a advent roma laptop with window 7. my itunes used to work fine, completely. every time i plugged in my ipod it was ok. recently my ipod was not working so i never bothered with itunes, however i have movies/tv prog that i purchased and would like to view them. i have an ipod nano from about 5 years ago, the problem with thet is, it switches on, but the circular control panel does nothing, all you can do is lock and unlock it - nothing else.
i tried to download new version of itunes, then uninstalled my origonal version, incase it was corrupted etc, i then again tried to down load new version and also version that is windows 64bit. still when i select the downlaod to open as son as it is finnished nothing happens. and now my desktop shortcut has dissapeared. before when it was there, id double click it, nothing, right click to open it, nothing.
im not the best technically minded but i just dont see what im doing wrong here, please help

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

Ipod nano 4g pioneer DEH P9880BT

Similar Messages

Maybe you are looking for