Ipod nano 4th generation battery is not charging in new Jaguar car

I've just got a 2010 Jaguar XKR car which comes with special cable for ipod. When I connect my 4th generation ipod nano, I get the message that the charging is not possible with this connection. However, when I connect my old ipod nano 2nd generation, it charges just fine. I presume the problem is with the cable. I'm thinking of getting another ipod (maybe ipod "touch") and wondering if anyone has any idea whether or not there are any similar issues with other ipods. Any input will be appreciated.

The cable in your new car should be replaced (by the installer) with the correct cable.
The message pops up on newer iPods when you attempt to charge using FireWire.
Newer iPod will not charge with FW but older ones will.
The 2nd gen nano will charge with FW but the 4th gen nano will not.
Apple notified manufacturers over three years ago that they would quit using FW to charge.

Similar Messages

  • IPod nano 5th generation battery is losing charge

    My iPod nano 5th generation battery is losing charge. I do not use this this ipod alot because I have older ipod iPod nano (3rd generation) which I like better. The problem is this ipod gos dead even if I don't use it. This ipod will not shut off and thats why it gos dead.
    Is there any way to troubleshoot thlis ipod nano 5th generation to find out how and why it will not shut off, because this should not go dead if your not using it...

    The iPod Nano 5th generation does not actually shut off. It "sleeps" by pressing the pause button until the screen goes black. To keep the battery from losing its charge, keep the iPod Nano connected to your computer, wall charger or a charging dock when not in use.
    When the iPod is left unattended (not charging), the battery will still lose its charge. This is mentioned in the battery section of the iPod Nano 5th Gen. User Manual.

  • IPod Nano 4th generation click wheel not working. HELP!

    i have the ipod nano 4th generation, and my click wheel doesnt work. I've had my ipod in my coat for a few days without knowing and im wondering if its because of the cold. my computer detects it and it turns on and off perfectly. the ipod is also in a very good condition.

    Intermittent problems are only covered if BB can verify them.

  • TS1382 ipod nano 4th generation stuck on apple logo-any new suggestions??

    Ipod nano 4th generation is stuck on apple logo. It is fully charged and suggestione via apple have not helped. It still connects to my mac air and syncs but screen is frozen to the apple logo. Any suggestions?

    Have you done a Reset (restarts iPod)?
    http://support.apple.com/kb/ht1320

  • IPod Nano (first generation) battery is not holding charge

    When I use my Ipod after the battery is fully charged, it loses power very quickly. It doesn't seem to be holding the charge as well as it used to. Sometimes the battery meter will suddenly turn red the after turning ipod off and on again it goes back to black.
    Is there anything I can do to fix this problem?
    Thanks.

    Try Restoring it in iTunes and then Resyncing and fully charging it. If this doesn't help it is time for a new battery.

  • IPod Nano, 2nd Generation. Does Not Charge, and Is Not Recognized

    I have Posted: Aug 8, 2007 3:54 PM , but no replies. Also I see a certain user (Jeff) massively repeating posts.
    Please help, my friends have got me an 2GB silver Ipod Nano, it goes through the whole routine on my friend's computers, they even put music into it for me, but when I connected it to my computer, the display says its fully charged (green plug inside battery) instead of charging (thunderbolt)!
    I did everything, EVERYTHING, they asked online, from resets, reboots, getting latest vs. of iTunes, restarted over 10 times, switched from USB Normal and USB 2.0 ports repeatedly, followed both the tech support automated and live, then (as they asked) searched for a few hours to find the correct drivers, and installed everything I could for my VIA chipset, and it still doesnt work.
    I remember one of (the call dropped initially) the tech support guys saying something about USB spor.inm
    Still can't find it.
    I need to upload my music and be able to charge my iPod on my own computer! Please help!
    Windows XP Asus K8V motherboard, 2.6 GHZ AMD 64 bit, 1 GB RAM
    Kindly help, someone

    I have the exact same problem, and nothing works. When I plug it into computer, it's recognized, it syncs, and it plays while connected. As soon as I disconnect, it's dead. I've charge it overnight, I've let it drain overnight, I've plugged it into a charger with same result, I've used it on two different computers. HELP

  • My Ipod nano 4th generation will not charge or turn on! Please help

    I bought a refurbished Ipod nano 4th generation 2 weeks ago from a good reliable ebay seller. It arrived and was in great working order with no issues what so ever. However this evening I realised it was out of battery, so I went to charge it and nothing. No light up, no recognition of it being plugged into the PC or when I try via a plug socket. I have contacted the seller about this asking for a refund as I have not done anything or put it anywhere that it would die like this. However I thought before I try to send it back I would try here and see if anybody knows what may be wrong with it.
    Thanks

    You need a new battery. 

  • My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black screeen.

    My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black (blank) screen.  What do I do?

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup. How can I get the music that resides on my ipod nano (4th generation back onto the new hard drive on my pc.

    I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup either locally or on the cloud. Much of the music is from old vinyl and podcasts which are no longer available.
    How can I get the music that resides on my ipod nano (4th generation) back onto the new hard drive on my pc.
    I have been reluctant to install iTunes on the new hard drive out of fear that I will lose all the contents on the ipod if I try to synch to the new hard drive.
    Help!

    No backup is a huge mistake.
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store ... - Apple - Support

  • My ipod nano, 4th generation, is not being recognized by my computer or itunes

    my ipod nano, 4th generation, is not being recognized by my computer or itunes, what do i do? I've tried using different cords, but nothing will pick it up.

    I am experiencing the same issue.  I have Mavericks with updated iTunes, reset both, not detected

  • My ipod nano 4th generation will charge and put music on it but it won't turn on??? help :-s

    i found my ipod 2 weeks ago and i put new music on there and sometimes it would not want to connect to the ipod and it kept saying (Disk space or something like that) but once i unpluged it and i tried to turn it on, it won't i have tried to rest it and i really want this sorted out and not get a new ipod and to listen to my music that i just put it on there :-/ PLEASE HELP

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • I have an ipod nano 4th generation.  I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano.  How can I get rid of his shuffle and re-add my nano

    have an ipod nano 4th generation.  I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano.  How can I get rid of his shuffle and re-add my nano?

    Hi lundjj,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting steps in this article helpful if your iPod nano does not appear in iTunes:
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    This information can also help if you are using multiple devices with a computer:
    iPod for Windows: Connecting multiple iPod devices to iTunes
    http://support.apple.com/kb/ht3622
    Although FireWire and USB connections will allow multiple iPod devices to be connected to the computer at the same time, iTunes for Windows works best with only one iPod connected at a time. If you plan to connect multiple iPod devices to the same computer, eject any iPod devices that you are not using from iTunes.
    All the best,
    Jeremy

  • HT1339 I have an IPOD Nano 4th Generation 8GB and need to restore to factory settings as want to sell it; however it will not reset and when plugged into my MAC it says firmware corrupt? CAn anyone shed light on what i can do to overcome this issue?

    I have an IPOD Nano 4th Generation 8GB and am unable to restore it back to factory settings even when it is connected to my MAC.  I have tried the menu/select hold but is not doing anything.  When connected to the MAC and select restore in itunes it comes up with 'Firmware Corrupt'.  It also states the IPOD is up to date.  I have the latest operating system on my MAC and wonder if this may be part of the issue?
    Can anyone shed light as to what i can do to reset it back to factory settings as would like to sell it and ensure it is ready for the new owner.
    Thanks
    jay68g

    See here: What to do if iPod can't be updated because the firmware file was corrupt or not found
    B-rock

  • I can't unlock my ipod nano 4th generation.  The screen is still working, I can sync to my computer and I can see when it is charging but it stays in the mode of being locked even after I unlock it at the top.

    I can't unlock my ipod nano 4th generation.  The screen is still working, I can sync to my computer and I can see when it is charging but it stays in the mode of being locked even after I unlock it at the top. What could be wrong?

    Hi Saint09,
    Thanks for visiting Apple Support Communities.
    I'd recommend the steps in our iPod troubleshooting assistant:
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jeremy

  • I am unable to sync my Ipod Nano (4th generation I believe) because my computer does not recognize my device.  Can anyone help me solve this problem?

    I am unable to sync my Ipod Nano (4th generation I believe) because my computer does not recognize my device.  Can anyone help me solve this problem?

    Reset the AMDS >  How to restart the Apple Mobile Device Service (AMDS) on Windows

Maybe you are looking for

  • Queue: one producer vs multiple consumers

    Hi, This may be a simple question. In my application, I have a master/multiple slaves queue architecture. So the master enqueues messages. Each message is adressed to only one slave. Since all the slaves are waiting after queue elements, they all sho

  • Cannot open documents in "PAGES" app since updating software. can anyone help???????

    cannot open documents in "PAGES" app since upgrading from original ipad 3 software to 7.1.2. can anyone offer suggestions please?

  • Client Count vs. Performance

    Hello everyone. I'd like to know your experience regarding how client count affects performance. What I have seen in a university network, with a very high client densiity, using 3500 APs, is that around 55 clients ping reply time gets over 200 ms; a

  • Trouble with Sirius

    Help! since Sirius has updated I am unable to open the app on my iPhone 4. I have tried deleting and re downloading but nothing works, pls, any suggestions?

  • Depot Billing Excise Inv selection J1iJ problem

    Hi, I had punched Sales order for 3 line items, i made the the delivery and also did the PGI for the same. After that when doing the Excise invoice selection thru T.code J1IJ there i had selected only two line items instead of 3 and save the document