IPod Nano 4th generation click wheel not working. HELP!

i have the ipod nano 4th generation, and my click wheel doesnt work. I've had my ipod in my coat for a few days without knowing and im wondering if its because of the cold. my computer detects it and it turns on and off perfectly. the ipod is also in a very good condition.

Intermittent problems are only covered if BB can verify them.

Similar Messages

  • Hiya, my ipod touch 4th generation cameras are not working.

    Hiya, my ipod touch 4th generation cameras are not working. I had the screen replaced about a month ago and it was working fine.  I woke up the other day and went on my camera and it had stopped working, it won't let me change from the front to back camera so i don't know what the problem  is: now all it shows when i go on the camera app is the shutter or a black screen. I have tried the advice people have said but it hasn't seemed to work. Any help would be appreciated!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar
    However, it other than Apple or an Apple Authorized Service Provider did the previous screen replacement , Apple will not help.
    For the future, saying that you tried the advice people have said, provides us with zero information as to what yu tried.

  • IPod touch 4th generation, home button not working at all, Help?

    IPod touch 4th Generation , home button not working at all, Help?

    - Try restoring your iPod to rule out a software problem.
    - The try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    iPad 2 home button fail: Apple Support Communities
    You can turn one Assistive Touch in Settings>General Accessibility to use the screen instead. See chapter 30 of the users guide
    iPod touch User Guide (For iOS 5.0 Software)
    If under warranty make an appointment at the Genius Bar of an Apple store.

  • My ipod nano (4th gen) is currently not working any ideas?

    My ipod nano (4th gen) is currently not working mainly because its stuck on the apple symbol, i have reset it countless times and have restored it but it will not go away any ideas?

    is Ipod 4, not Iphone =o)

  • My Ipod Nano 4th gen click wheel won't work will apple be able to fix this?

    My Ipod Nano 4th Gen's Click Wheel won't work.Is there a way that Apple can repair this for me and how much will it cost?

    Apple will exchange your iPod for a refurbished one for $99 for the 16 GB one and $149 for the others. You can send it to Apple or exchange it at an Apple store
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          
    . They do not fix yours.
    Apple - iPod Repair price                       

  • Ipod nano 4th generation battery is not charging in new Jaguar car

    I've just got a 2010 Jaguar XKR car which comes with special cable for ipod. When I connect my 4th generation ipod nano, I get the message that the charging is not possible with this connection. However, when I connect my old ipod nano 2nd generation, it charges just fine. I presume the problem is with the cable. I'm thinking of getting another ipod (maybe ipod "touch") and wondering if anyone has any idea whether or not there are any similar issues with other ipods. Any input will be appreciated.

    The cable in your new car should be replaced (by the installer) with the correct cable.
    The message pops up on newer iPods when you attempt to charge using FireWire.
    Newer iPod will not charge with FW but older ones will.
    The 2nd gen nano will charge with FW but the 4th gen nano will not.
    Apple notified manufacturers over three years ago that they would quit using FW to charge.

  • Ipod nano 5th generation scroll wheel stopped working.  Any way I can fix this?

    That's my basic question.  I've tried plugging it in and restoring to factory default.

    iPod Repair Tutorials

  • IPod nano 4th generation backlight no longer works.

    After 2 years of faithful service my iPod nono no longer allows me to view the screen without the help of a bright light pointed at the screen. I tried the 5 'Rs' in the manual, it is fully charged, plays as it always has but without the backlight. Please help.

    If the 5 R's didn't address the issue, it's likely hardware related, meaning you'll need to have your iPod serviced in order to gain full functionality of it again.
    Otherwise, it's time to start saving for a new iPod.
    B-rock

  • IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

    1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
    2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use, 
    3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
    4. After  5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
    5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
    6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
    7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
    8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
    9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
    10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
    KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

    "I get the feeling that this is a software issue that could probably be solved quite easily"
    Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
    !http://i50.tinypic.com/izvwo1.gif!

  • My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

    My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

    I am assuming you are using the Lightning to 30 pint adapter and it is not working?

  • My 4th Generation click wheel 40 GB iPod is no longer recognized by iTunes.

    Hi There,
    The title actually says it all..
    (My 4th Generation click wheel 40 GB iPod is no longer recognized by iTunes 7.4.2, although the iPod works fine.. iTunes keeps saying to reset it, but I don't see why I should)
    The iPod seems to work just fine, so I'm not in a big hurry to erase all my songs audio books etc..
    I am thinking that this is a problem with Macintosh iTunes version 7.4.2, from what I'm seeing, but how should I proceed?
    Many thanks for any help.
    Eric

    Sounds like a dead battery. Take it into your local Apple store/Genius bar and see if there is anything they can do for you.  Another option is to send it in to a third party repair company who can replace the battery at a pretty low cost.
    B-rock

  • Why won't iPod 4th Generation Click Wheel 40gb (non-photo)  charge?

    I have an old but much-loved iPod 4th Generation Click Wheel 40gb (non-photo model) that I keep on a charging dock. Yesterday the screen went blank and it refuses to charge, so I assume the battery is dead. 
    Can anyone tell me if that's the reason?  If so, exactly what replacement battery I should get?  I've found replacement batteries listed for the iPod 4th Gen 40 GB photo and the 4th Gen 20 GB, but don't know if they'll fit.  Thanks so much for any information out there!

    hmm - curiouser and curiouser
    I've now managed to get it to manually update (after iTunes took 100% of system resources and I had to force quit it...) but that still doesn't really help me with the auto-sync feature which still won't work
    aaaaaaggggggghhhhh

  • My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    Sounds like the battery is shot and in need of a replacement.  You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
    Not much else you can do for troubleshooting this one.
    B-rock

  • My Ipod nano 4th generation will not charge or turn on! Please help

    I bought a refurbished Ipod nano 4th generation 2 weeks ago from a good reliable ebay seller. It arrived and was in great working order with no issues what so ever. However this evening I realised it was out of battery, so I went to charge it and nothing. No light up, no recognition of it being plugged into the PC or when I try via a plug socket. I have contacted the seller about this asking for a refund as I have not done anything or put it anywhere that it would die like this. However I thought before I try to send it back I would try here and see if anybody knows what may be wrong with it.
    Thanks

    You need a new battery. 

  • I have an ipod nano 4th generation.  I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano.  How can I get rid of his shuffle and re-add my nano

    have an ipod nano 4th generation.  I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano.  How can I get rid of his shuffle and re-add my nano?

    Hi lundjj,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting steps in this article helpful if your iPod nano does not appear in iTunes:
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    This information can also help if you are using multiple devices with a computer:
    iPod for Windows: Connecting multiple iPod devices to iTunes
    http://support.apple.com/kb/ht3622
    Although FireWire and USB connections will allow multiple iPod devices to be connected to the computer at the same time, iTunes for Windows works best with only one iPod connected at a time. If you plan to connect multiple iPod devices to the same computer, eject any iPod devices that you are not using from iTunes.
    All the best,
    Jeremy

Maybe you are looking for

  • Safari makes my macbook freeze all of a sudden ?

    A few days ago I started experiencing problems with my Macbook. It was working fine until I shut it off. I turned it back on again and it would not go past the blue screen that appears right before everything starts up, even though there was a cursor

  • Disk Disaster: SMART status "failing", can't mount - what to do?

    Hi, My GF's PB 12" started getting slow on disk access, so I - suspecting a hard disk failure was impending - checked SMART monitor status, and all seemed fine. Just the same, I made a full backup using SuperDuper. Now, two weeks later, the drive has

  • How to Enable Full text search in UCM with Oracle 10g

    Hi, Can you please guide me on how to enable full text search in UCM after I have installed it. My database is Oracle 10g. It would be great if you could guide me through the steps since I am very new to this product. Regards Ashish

  • Read image data from SQL Server database and display it in a JSP web page

    Hi experts, I am doing a project in which I have to upload images to the database via JSP/servlets. I am able to do this. Now I want users to view and dowload these images which are stored in the database. Please help me of how can I read the images

  • Device query in Channel Mapping failed - no playback

    Hello Forum!  I'm struggling to figure out why playback won't work in Audition.  A dialogue box pops up at opening that says that "Audio Hardware preferences have changed".  I check them and the default input and output are still set as Built-in Inpu