Ipod nano 4th generation problem? :/

Hi! Ok, so this is what happened.
The other day, I was listening to my ipod (Which like I said, is a green 8GB, 4th generation ipod Nano) and the battery was dying. I went to plug it in, but the computer didn't pick it up, and it died anyway while hooked up. Now, my computer sees it as an "Unknown device" and it won't show up in itunes. It won't turn on now either. I've searched everywhere for an answer but they all say the same thing "Press and hold the menu and center buttons down". I've tried that before, it's not working. My charger isn't an apple one though (It's a black one that folds up, we bought it from walmart)...could that be the problem? I believe it's the driver, but I'm not sure how to go about fixing it..so..any ideas?
Thank you for reading.

Solved, it WAS the charger. Lol.

Similar Messages

  • IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

    1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
    2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use, 
    3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
    4. After  5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
    5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
    6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
    7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
    8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
    9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
    10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
    KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

    "I get the feeling that this is a software issue that could probably be solved quite easily"
    Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
    !http://i50.tinypic.com/izvwo1.gif!

  • I am unable to sync my Ipod Nano (4th generation I believe) because my computer does not recognize my device.  Can anyone help me solve this problem?

    I am unable to sync my Ipod Nano (4th generation I believe) because my computer does not recognize my device.  Can anyone help me solve this problem?

    Reset the AMDS >  How to restart the Apple Mobile Device Service (AMDS) on Windows

  • How do I manually transfer music from my MAC to my iPod Nano (4th Generation)?

    Recently, I have encountered a problem when trying to drag and drop songs and playlists from my Mac to my iPod Nano (4th Generation). I click on the file in my iTunes Library window but it won't allow me to copy it to my iPod. I've restarted both my Mac and my iPod but it hasn't helped. Do I need to download an update?Any suggestions would be greatly appreciated. Thanks.

    Do I need to download an update?
    Use Software Update to update iTunes if needed.  Read the iTunes/iPod Summary page to find out if your iPod Nano needs any updates which you can download from there.
    You cannot drag & drop anything to an iPod Nano.  You must sync - Syncing Music to iPod

  • IPod Nano 4th generation click wheel not working. HELP!

    i have the ipod nano 4th generation, and my click wheel doesnt work. I've had my ipod in my coat for a few days without knowing and im wondering if its because of the cold. my computer detects it and it turns on and off perfectly. the ipod is also in a very good condition.

    Intermittent problems are only covered if BB can verify them.

  • Ipod nano 4th generation, 8gb dead?

    Hi, First of all, of course my problem is that I can't turn on or even charge my ipod nano 4th gen. I did everything that people said to do: Press and hold the menu button, and the round button in the center, toggle the switch, and plug it in to my computer..but none of them work. Should I contact Apple by email? Should I go to the nearest Apple store? Is there anything else I can do to try get it back or is it gone forever? ... Thanks.

    Hi charlietheunicorn19,
    If your iPod Nano is non-responsive, you may want to try all the troubleshooting steps in the following assistant before taking it in for service:
    Apple Support: iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    - Brenden

  • I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup. How can I get the music that resides on my ipod nano (4th generation back onto the new hard drive on my pc.

    I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup either locally or on the cloud. Much of the music is from old vinyl and podcasts which are no longer available.
    How can I get the music that resides on my ipod nano (4th generation) back onto the new hard drive on my pc.
    I have been reluctant to install iTunes on the new hard drive out of fear that I will lose all the contents on the ipod if I try to synch to the new hard drive.
    Help!

    No backup is a huge mistake.
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store ... - Apple - Support

  • My ipod nano, 4th generation, is not being recognized by my computer or itunes

    my ipod nano, 4th generation, is not being recognized by my computer or itunes, what do i do? I've tried using different cords, but nothing will pick it up.

    I am experiencing the same issue.  I have Mavericks with updated iTunes, reset both, not detected

  • My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    Sounds like the battery is shot and in need of a replacement.  You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
    Not much else you can do for troubleshooting this one.
    B-rock

  • My ipod nano 4th generation will charge and put music on it but it won't turn on??? help :-s

    i found my ipod 2 weeks ago and i put new music on there and sometimes it would not want to connect to the ipod and it kept saying (Disk space or something like that) but once i unpluged it and i tried to turn it on, it won't i have tried to rest it and i really want this sorted out and not get a new ipod and to listen to my music that i just put it on there :-/ PLEASE HELP

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • My Ipod nano 4th generation will not charge or turn on! Please help

    I bought a refurbished Ipod nano 4th generation 2 weeks ago from a good reliable ebay seller. It arrived and was in great working order with no issues what so ever. However this evening I realised it was out of battery, so I went to charge it and nothing. No light up, no recognition of it being plugged into the PC or when I try via a plug socket. I have contacted the seller about this asking for a refund as I have not done anything or put it anywhere that it would die like this. However I thought before I try to send it back I would try here and see if anybody knows what may be wrong with it.
    Thanks

    You need a new battery. 

  • I have an ipod nano 4th generation.  I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano.  How can I get rid of his shuffle and re-add my nano

    have an ipod nano 4th generation.  I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano.  How can I get rid of his shuffle and re-add my nano?

    Hi lundjj,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting steps in this article helpful if your iPod nano does not appear in iTunes:
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    This information can also help if you are using multiple devices with a computer:
    iPod for Windows: Connecting multiple iPod devices to iTunes
    http://support.apple.com/kb/ht3622
    Although FireWire and USB connections will allow multiple iPod devices to be connected to the computer at the same time, iTunes for Windows works best with only one iPod connected at a time. If you plan to connect multiple iPod devices to the same computer, eject any iPod devices that you are not using from iTunes.
    All the best,
    Jeremy

  • HT1339 I have an IPOD Nano 4th Generation 8GB and need to restore to factory settings as want to sell it; however it will not reset and when plugged into my MAC it says firmware corrupt? CAn anyone shed light on what i can do to overcome this issue?

    I have an IPOD Nano 4th Generation 8GB and am unable to restore it back to factory settings even when it is connected to my MAC.  I have tried the menu/select hold but is not doing anything.  When connected to the MAC and select restore in itunes it comes up with 'Firmware Corrupt'.  It also states the IPOD is up to date.  I have the latest operating system on my MAC and wonder if this may be part of the issue?
    Can anyone shed light as to what i can do to reset it back to factory settings as would like to sell it and ensure it is ready for the new owner.
    Thanks
    jay68g

    See here: What to do if iPod can't be updated because the firmware file was corrupt or not found
    B-rock

  • I can't unlock my ipod nano 4th generation.  The screen is still working, I can sync to my computer and I can see when it is charging but it stays in the mode of being locked even after I unlock it at the top.

    I can't unlock my ipod nano 4th generation.  The screen is still working, I can sync to my computer and I can see when it is charging but it stays in the mode of being locked even after I unlock it at the top. What could be wrong?

    Hi Saint09,
    Thanks for visiting Apple Support Communities.
    I'd recommend the steps in our iPod troubleshooting assistant:
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jeremy

  • HT204266 How do I buy a game for an ipod Nano 4th generation?

    I have received an ipod nano, 4th generation from a friend whose daughter is upgrading.  I gave it to my 8 year old, and he wants some games on it.  How do I buy Sonic and other games for it?  When I went to the itunes store, there didn't seem to be any way to find click wheel games.

    You don't.  Apple stopped selling ( or app makers quit making)  click wheel games some time ago.

Maybe you are looking for

  • Can't figure out how to connect router....

    I've tried for three days to hook up my wireless router.. I have a WRT54G and a Wireless G USB adapter and DSL modem, when I hook up the router like the setup tells me, I do not get internet access.. I have no clue what I am doing wrong, according to

  • Can we use MRP to plan for FERT in-house produced  with PIR's & has Min/Max

    Hi SAP Guru's I have a very critical issue from the client who wants to use MIN/ MAX stock values for planning its finished products (in-house produced) <b>here is the details of the scenario</b> Client recieves 2 Excel files every week from customer

  • Help with installation ORACLE 11g  SES

    hi, i'm new at this, i was almost done with the configuring of a new instance of Oracle 11g, however i'm running into this error, when one of the assistants is executing. can any of you point out what should i try or what could be the cause of this p

  • Photo shop Wacom tablet experiencing glitches

    I am using photoshop cc bootcamped mac running windows 7 I am currently using intuos pro I have this problem when I apply a stroke immediately after color picking, the program adds a strait line of 100% pressure from the start of my stroke to the end

  • Importing DNG files to Aperture 2.1.4

    Hi, I am very new to RAW image files and using aperture. I want to be able to take RAW image pictures and make use of them on aperture and so I have added CHDK on my canon ixus70. I know this topic has come up before but I can't seem to add to those.