Ipod nano 5g and nike + ipod watchremote don't work

Hello! My nike + watchremote seems not to be working with my new ipod nano 5g. I tried rebooting the ipod (with and without the nike+ receiver plugged in). I also replaced the watchremote battery. I don't know what to do.Needless to say that I know how to sync it properly. The question is that the ipod doesn't recognize the watchremote while I'm on the "push any button to sync" phase. Any suggestions? thank you very much
Message was edited by: JaviMati

Sorry guys, the nike + ipod watchremote IS NOT an Apple product. My bad. Cheers! ^_^

Similar Messages

  • Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help

    Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this

    Did you try rebooting the iPad? You will need to have some battery power for this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This may be helpful
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Frozen or unresponsive iPad - Apple
    iPad: Unable to update or restore

  • HT201412 My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work, As long as I have this situation I can do nothing on

    My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!

    I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
    I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
    I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off?

  • I forgot my Apple ID password and I can't reset it because my email account has been closed and the security questions don't work

    I Forgot my Apple ID password and I can't reset it because the related email account has been closed and the security questions don't work! How do I solve this? Thank you.

    Click here and contact Apple.
    (113292)

  • I updated to the latest IOS and now my passwords don't work.  Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?

    I updated to the latest IOS and now my passwords don't work.  Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?

    This may sound crazy, but download any free app.  This often "shocks" the other apps into working.

  • What should I do on GMAIL LOADING and the buttons that don't work on Firefox 4?

    The Write e-mail, reply, reply all and config GMAIL buttons DON'T WORK AT ALL in MZ Firefox 4. In Explorer 9 works fine. Shat shoud I do? And ABOUT:CONFIG dom.storage don't fix the problem

    Data Recovery – Best
    Data Recovery – Disk Drill
    Data Recovery – Data Rescue
    Data Recovery – File Salvage
    Data Recovery – Stellar Phoenix
    Data Recovery - uFlysoft
    Data Recovery – Best
    Data Recovery – Disk Drill
    Data Recovery – Data Rescue
    Data Recovery – File Salvage
    Data Recovery – Stellar Phoenix
    Data Recovery - uFlysoft

  • My screen freezes up more often and the keyboard shortcuts don't work. I have to manually shut it down. what can I do about it?

    My screen freezes up more often and the keyboard shortcuts don't work. I have to manually shut it down. What can I do about it? It's a pain when I'm in teh middle of doing something or chatting in MSN Messenger.

    The problem is no Frre Ram. (green slice), Use Disk utility to REpair Permissins & see if the Ble turms to green.
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4

  • I just opened my new earphones and the volume buttons don't work! Help

    I just used my iPhone 5s earphones the first time yesterday and the volume buttons don't work. I tried unplugging them and then plugging them in again and they still don't work. Also when I plug in any kind of earphones in my phone it doesn't completely go in, is that supposed to happen?

    Never mind, I found out why it didn't work. Since my phone and earphones were new the earphones didn't plug in well. So when I plugged it into my mac it went all the way in and the buttons worked. When I plugged it back in my phone it went al the way in this time and the buttons worked.

  • Interferences between ipod nano 5G and nike +.

    I have an ipod nano 5th Generation and a pair of nikes with nike   included. When I go to run and I listen the songs with noise, jumps, bad. But If I listen songs in my room I can hear songs perfectly. What is the problem with nike   and ipod nano 5thG

    Sorry guys, the nike + ipod watchremote IS NOT an Apple product. My bad. Cheers! ^_^

  • Forzen Ipod, resets don't work

    So I clicked a song last night and my ipod forze. I did the reset and it went to that little gray apple and froze there. It has been there since. Resets don't work. Connecting it to the computer won't work, I can't do anything. Now when I reset it, it comes up with a sad ipod, an exclamation point and the address www.apple.com/support/ipod, and I can't figure out where to begin to find info there. What is going on and what can I do to fix it?

    See if you can put it into Disk Mode.
    http://support.apple.com/kb/HT1363
    If that works, connect it to the computer. If you can get iTunes to recognize it, you should probably do a Restore (in iTunes) to erase the iPod and initialize the iPod's software. Then, resync the iPod to your iTunes library.

  • My ipod buttons don't work

    Also my ipod volume jumps to as loud as it can go and sometimes refuses to turn down ,but my up volume and power/hold buttons no longer work ;if by some miracle i can turn it off it automatically dies and won't turn back on , is there anything i can do for this? i got my itouch in december, is it covered by any sort of automatic warranty?

    Have you tried resetting your iPod? To do this, turn the Hold switch on, then off and press-and-hold the Menu and Select (centre) buttons for ten seconds. The Apple logo will appear and then the iPod will return to the main screen.
    If this does not fix the problem, try resetting a couple more times and if that doesn't work, try a Restore. Be aware though, that Restore will remove all the content from your iPod, so if you have deleted songs etc. from iTunes, you will lose them.
    Phil

  • I updated to ois 4.3 and now my apps don't work

    I updated my 3rd generation ipod to the ios 4.2.1 and now half my apps don't work. How do I get back to where they do and is there some way to fix this bug?

    - First try resetting your iPod.  Nothing will be lost:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Some users have said installing a new app resolves the problem.  Thus, I would try purchasing a free app.

  • The power button and the volume buttons don't work

    The power button ant the volume buttons don't work. I've tried to restore a previous version and doesn't work.
    I use iOs 5.
    Thanks

    If you did not restore to factory defaults/new iPod try that.  If you still have a problem after that then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Z77A-GD65 - fast ram and Intel Rapid Start don't work together??

    Greetings.
    I have got 2x4Gbyte G.Skill CL10 2400Mhz ram. When running this ram at its default speed at 2400Mhz, Intel Rapid Start don't work. When I shut it down, it acts normal until the point where the system "wakes up" for a few seconds to write to the special partition for IRS. The PC then try to reboot, but after 2 attemps it says that the Overclocking has failed and I have the choise of F1 (setup) or F2 (load default settings and continue).
    If I lower the ram speed below the default speed (i.e. don't use the XMP profile), then Intel Rapid Start works fine.
    Memtest86 do not show any error at all after 4 pass with the G.Skill at 2400Mhz. To me it seems like the motherboard can't handle this speed at the state in Intel Rapid Start.
    Anybody with info about what to do? 

    Quote from: RemusM on 16-January-14, 00:14:15
    The internet is bloated with paid "reviews" ...
    Here is what you have and what you paid for:
    http://ark.intel.com/products/65520
    Max Memory Size (dependent on memory type) : 32 GB
    Memory Types : DDR3-1333/1600
    Memory Channels : 2
    Max Memory Bandwidth : 25.6 GB/s
    Intel does not guarantee anything above 1600MHz.
    On the top of that, 25.6 GB/s bandwidth is enough for DDR3-1600 in dual-channel only.
    In other words, above 1600Mhz the perfomances boost is close to ZERO.
    RAM speed over 1600Mhz does nothing? That WAS true, but not anymore. First of this:
    Anandtech:
    http://www.anandtech.com/show/6372/memory-performance-16gb-ddr31333-to-ddr32400-on-ivy-bridge-igp-with-gskill
    xbitlabs:
    http://www.xbitlabs.com/articles/memory/display/ivy-bridge-ddr3.html
    overclock.net:
    http://www.overclock.net/t/1438222/battlefield-4-ram-memory-benchmark
    Second, I can messure a real performance difference when using this memory at 2400mhz vs 1600mhz, f.i. Winrar5.01 x64, when searching in reg.database, and other memoryhungry programs. My graphic-card is not powerfull enough to show any difference in games, but almost anything else I _can_ se a difference.
    If you honestly can read these 3 links and still say, that memory speed does not matter, I think I know more about this than you 
    I'm quite sure, that a big place like Anandtech is not payed to show up this result.

  • Quicktime and new Adobe flash don't work!!

    Ever since I have ? downloaded new iTunes/Quicktime updates I cannot get Quicktime to play any movie trailers. Also, when I go to any sites which need a Flash player, I am unable play any flash related videos. To add further frustration, I am unable to download the new Adobe flash player. It "downloads," but goes nowhere on my computer and is nonfunctional!! I feel like because I have an "old" Mac with Panther (which otherwise works great!), I am slowly being phased out of all the new downloads as they often either don't work or screw up my system. Help!!

    Hi again Stephen,
    That's great! I'm glad that that got you back on the track.
    I personally Repair Permissions about once a week or so (though the need to is highly debated here in Discussions).
    You might be interested in having a look at About Disk Utility's Repair Disk Permissions feature.
    Always Repair Permissions from Disk Utility on you HD before and after any Software Update/Upgrade for trouble free downloads.
    Glad I was able to help and thank-you for the courtesy of extending the Solved star!
    good luck,
    littleshoulders [:-)

Maybe you are looking for