IPod Nano (5th gen, 16GB) syncing some albums, but not others...?

Hello! I am new to the world of iPods, so please bear with me.
I recently purchased an iPod Nano (5th gen, 16GB) and figured out how to sync it with iTunes. Unfortunately, it seems to only sync up with select albums in my library. I know that in order for an album to sync there needs to be check marks next to each song, which I did, but after I sync it I browse my iPod and find that only (roughly) half of the albums I indicated actually show up on my iPod. For example, I was able to sync albums by The Afghan Whigs, Bryan Ferry, and Berlin just fine, but for some reason I was not able to sync certain albums by Autechre, Low, or King Black Acid.
What gives?? I will note that I am using the Windows 7 release candidate - hopefully this has nothing to do with it.

Hello livoryy
It sounds like the battery just does not hold a charge. Check out the page below and look at the battery replacement section to get all the answers to what you are asking.
Service Answer Center – iPod
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Regards,
-Norm G.

Similar Messages

  • My ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

    my ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

    What have you tried so far in terms of troubleshooting?  After leaving the Nano to sit and charge for at least 30 minutes, try resetting it by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. You'll want to make sure the Hold Switch is not in the On position as well.
    B-rock

  • IPod Nano 5th gen wont sync photos with iTunes 10

    My ipod nano 5th gen, is having trouble syncing photos and saying the file isnt there and it wont sync the photos. what could be wrong ??
    i have re-set settings and that didnt work
    PLEASE HELPPPP!!!!!!!!!!

    That might be a damaged iPod photo cache, Kid.
    If you delete your photo cache as per the following document, are you able to get a proper photo sync?
    [iTunes: Photo sync creates iPod Photo Cache folder|http://support.apple.com/kb/TS1314]

  • IPod Nano 2nd Gen showing up in Finder, but not in iTunes.

    I've done all the troubleshooting @: https://www.apple.com/ca/support/ipodnano/assistant/itunes/

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • My ipod nano 5th gen has blank screen

    Hi, my ipod nano 5th gen has a blank screen, will not switch on, and not recognised by computer. Have tried holding menu and central button but still dead. Any suggestions please.

    Hello Emilyyandrews,
    To fix try this:
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    This has the best chance of fixing your issue if its not hardware related. If it does not fix it then you may want to consider setting the ipod up for service:
    https://selfsolve.apple.com/GetWarranty.do
    Or you can call Apple and have them set it up for you. Have your serial number ready.
    1800 MY APPLE
    Hope this helps.
    ~Julian

  • Help me sync my ipod nano 5th gen

    My new i tunes purchases will not sync to my i pod nano (5th Gen).  I did not have this problem unitl I replaced my laptop.  I am thinking it must be some sort of setting on my laptop.  My Ipod has plenty of space, its about 14 songs...  please help!  If someone can call me and walk me through it, that would be awesome!!

    Hey there TXann,
    It soudns like you have purchases that will not sync over to the iPod Nano 5th gen no matter what you do. I want to recommend running through the iPod 5rs to help troubleshoot the issue here:
    iPod nano (5th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    I suggest trying the sync after each step so as to minimize the amount of troubleshooting you need to do. Here is step one to get you started:
    Reset
    To reset your iPod:
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    Tip:
    If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • HT1373 I bought an ipod nano 5th gen and it came with 900 songs on it. How can i retain the music before i authorize this unit to my itunes account? It says it will erase all content once I sync with my imac7. Is there anyway to keep the music??? please h

    I bought a used ipod nano 5th gen and it came with 900 songs on it. How can i transfer, sync, and retain the music before i authorize this unit to my itunes account? It says it will erase all content once I sync with my imac7. Is there anyway to keep the music??? please help!!
    Thanks,
    Aaron

    The music does not belong to you.  You have no legal right to it and there is no way to keep it.
    Sorry

  • My iPod Nano 5th gen is broken, and I need some help fixing it!

    I have a iPod Nano 5th gen, and it is currently broken. When I play a song it usually pops up and at the bottom it shows the length of the song. Now when I play music it pops up and at the bottom it shows the volume control. I tried to switch it back by hitting the central circle button, but it immediately switched it back to volume control. Sometimes the menu button will work but now I usually have to hit the menu button a few times for it to work. I have run out of ideas so if anyone has some please share. Thanks!

    You need to get it serviced. The click wheel is damaged.

  • I upgraded to itunes 10.6 and I can't manually sunc to my ipod nano 5th gen anymore. I have re-installed itunes, restored my ipod and tried it dozens of times

    I upgraded to itunes 10.6 and with that "upgrade" I can't manually sunc to my ipod nano 5th gen anymore. I have re-installed itunes, restored my ipod, tried syncing under another users account and everything else I can think of. It syncs ok upon initial start-up but then when I tryp to select podcasts or music to sync to it, itunes crashes. Now that I restored my ipod, I can't even get my old podcasts much less add new ones.

    Do you have any better luck with that if you update to iTunes 10.6.1.7?
    From the notes for the release:
    iTunes 10.6.1 provides a number of improvements, including:
    • Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
    • Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
    • Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
    • Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
    http://www.apple.com/itunes/download/

  • IPod Nano 5th Gen memory issues?

    Hello. My iPod Nano 5th gen is great, and I've been able to use it for 2 years now, and it serves me well. Perfect condition since the day I got it. However, there are some memory issues...
    First off, I have only two recorded videos totaling 1 minute and 29 seconds, so it shouldn't take up much memory at all. And I don't have any other videos on my iPod either.
    Well, when I go to "About" under "Settings", then it always says that there are only 902 MB left, and it's an 8 GB. What's weirder is that it says that 6.1 GB are being used my audio, and I only have 712 songs. When I select all of the songs that are on my iPod on my PC, then it tells me that it totals to only 3.53 GB. Kinda weird, and I really need this extra space now.
    Secondly, I should tell you that I don't use iTunes to syncronize my iPod. I use a third-party program called CopyTrans Manager because it's simpler, easier to navigate, and faster in my opinion. Idk what it is, but it's bothering me. Hopefully some of you can tell me where I can go to eliminate these issues and finally get my iPod back to better use and full memory.
    Help me please. I don't know where to go next...
    Thankee.

    I don't use iTunes to syncronize my iPod. I use a third-party program called CopyTrans Manager
    Contact the manufacturer.  Check with them to determine if the issue is with them.

  • IPod Nano 5th Gen unmounts before synch

    When I attempt to synch my iPod Nano 5th gen to my Mac (OSX 10.8.4) is appears in the devices for a short time, then it disappears. I have not synched in a while, and the iPod has been sitting in a 3rd party dock which is attached to my amplifier.
    I have:
    checked my iTunes is up to date
    performed a reboot
    swapped USB ports
    reset my iPod
    placed my iPod into disk mode
    I recorded a log of the events that occur when I plug it in:
    10/06/13 7:21:00.000 PM
    kernel[0]
    USBMSC Identifier (non-unique): 000A27002003B3C1 0x5ac 0x1265 0x1
    10/06/13 7:21:03.989 PM
    KernelEventAgent[49]
    tid 00000000 received event(s) VQ_LOWDISK (4)
    10/06/13 7:21:03.989 PM
    KernelEventAgent[49]
    tid 00000000 type 'hfs', mounted on '/Volumes/BTW iPod', from '/dev/disk2s2', low disk
    10/06/13 7:21:04.000 PM
    kernel[0]
    jnl: disk2s2: journal start/end pointers reset! (jnl 0xffffff8028f93b28; s 0x4fa000 e 0x4fa000)
    10/06/13 7:21:04.000 PM
    kernel[0]
    HFS: Low Disk: Vol: BTW iPod freeblks: 7557, warninglimit: 9600
    10/06/13 7:21:04.010 PM
    KernelEventAgent[49]
    tid 00000000 type 'hfs', mounted on '/Volumes/BTW iPod', from '/dev/disk2s2', low disk
    10/06/13 7:21:04.091 PM
    fseventsd[53]
    event logs in /Volumes/BTW iPod/.fseventsd out of sync with volume.  destroying old logs. (444 1 447)
    10/06/13 7:21:04.096 PM
    fseventsd[53]
    log dir: /Volumes/BTW iPod/.fseventsd getting new uuid: 4AD325DF-D860-4296-BBB7-9846937A7BC9
    10/06/13 7:21:04.103 PM
    NetworkBrowserAgent[234]
    netfs_GetServerInfo returned 65
    10/06/13 7:21:04.171 PM
    NetworkBrowserAgent[234]
    netfs_GetServerInfo returned 65
    10/06/13 7:21:08.486 PM
    fseventsd[53]
    Events arrived for /Volumes/BTW iPod after an unmount request! Re-initializing.
    10/06/13 7:21:08.486 PM
    fseventsd[53]
    creating a dls for /Volumes/BTW iPod but it already has one...
    10/06/13 7:21:08.644 PM
    fseventsd[53]
    disk logger: failed to open output file /Volumes/BTW iPod/.fseventsd/00000000019b7567 (No such file or directory). mount point /Volumes/BTW iPod/.fseventsd
    10/06/13 7:21:08.645 PM
    fseventsd[53]
    disk logger: failed to open output file /Volumes/BTW iPod/.fseventsd/00000000019b7567 (No such file or directory). mount point /Volumes/BTW iPod/.fseventsd
    10/06/13 7:21:08.660 PM
    NetworkBrowserAgent[234]
    netfs_GetServerInfo returned 65
    10/06/13 7:21:08.670 PM
    NetworkBrowserAgent[234]
    netfs_GetServerInfo returned 65
    Any help greatly appreciated.
    Cheers
    Brett

    The questin that the computer asked you was "This iPod has been synced with another computer. Do you want to erase this iPod and sync with this computer." If you said yes then it deleted everything. The way to put it back on is.
    1. Click on the iPod
    2. Click Podcast on the top of the screen.
    3. Check the box
    4. Choose what Podcasts you want to have.
    5. Click the sync button

  • Have a ipod nano 5th gen., keep getting error message 13019!!!

    I have an ipod nano, 5th gen. Yesterday when I tried to sync music I received error code 13019. I tried unsyncing music, resyncing,...finally ended up restoring, resetting..nothing worked. All updates are current on itunes and ipod. This has never happened. There is no voice memos options on playlist either. Please help!

    So you worked through the suggestions in this Apple support document then?
    iTunes displays a -69 error when syncing iPod
    B-rock

  • 2 yrs worth of music on my ipod nano 5th gen just vanished while I was trying to add four new tracks.

    Most of the music I've put on my ipod nano 5th gen in the last 2 years just vanished while I was trying to add four new tracks. Stuff from before that seems to be still there (I add stuff manually, not sync, and the ipod wasn't full). It was a bit glitchy as soon as I plugged it in to update - threw up a few error messages, decided to verify my ipod a couple of times, After that, once or twice itunes seemed to lose the ipod completely, although as far as the laptop was concerned it was definitely still connected, so i went for the 'safe to remove hardware' option and reconnected...
    I'm guessing somewhere in the midst of whatever was going on there, something got confused or corrupted, but I have no way to tell what... Ipod seems to think it is using less of its capacity now, but I don't know whether to believe it or not!
    Can I get this stuff back? It's not just stuff I bought from itunes, either - things I put on from cds have gone too. I have all the music either backed up or on cds, but I'm not in the same country as my cds right now - also rebuilding all of my playlists and trying to remember what went where is going to be a pain! Is there a quicker way than just doing it all over again?

    Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
    Message was edited by: michael08081

  • Ipod nano 5th gen, when listening to audiobooks, ipod does not advance to next part when previous part ends, it returns to beginning of previous part

    when listening to audiobooks, when a part finishes, i.e., part 1, ipod starts over at beginning of part just finished instead of advancing to the next part, i.e., part 2.  Is there some setting I can change so it advances to next part instead of repeating the part I just finished?

    iPod Nano 5th Gen. User Manual 

  • My iPod Nano 5th Gene Play button is not working

    My iPod Nano 5th gene's play button stopped working recently, meaning I can't pause my music and I have to use the "sleep" option to turn it off! I've had it for nearly 3 years, so the warrant is up, and I live no where near an Apple store.

    Is none of the usual 5 R's of troubleshooting resolve the issue, you can be certain that it's hardware related.
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    So whether or not you live near an Apple store, you still need to take or send your iPod in for service to have an out of warranty exchange done for the prices listed on this page.
    http://www.apple.com/support/ipod/service/prices/
    You could also do some research on third party services that will actually repair the damaged component for a little less than what you would pay if you went the Apple route.  A Google search for "iPod Nano repair service" should give you a number of results to work with.
    B-rock

Maybe you are looking for

  • Form Validation - Error Trapping Not Working.

    Hi, I'm a Coldfusion beginner desperately trying to get along with some database work for my site and have come across an annoying error that I just can't solve! I'm sure I'm missing something really basic - I just can't for the life of me figure out

  • Import block prices in one field?

    Hello everybody, I have another question an this time it is about the MDM Import Manager and a possibility to import an article with block prices [lower bound]; [purch org]; [price]; [currency] Source File Priceinformation 1;Dynamo Zentraler Einkauf;

  • BI 7 WAD integrated with Visual Composer

    Hello gurus! I need to know how can I add WAD item into VC report? I am using BI 7, and I havent found information about it, only from BW 3.x Somebody can help me, please??? Thanks a lot for all your help Best Regards Lety

  • VAT and CST details for Company Code

    Hi All I have a requirement to store following details at the company code and plant level in SAP ECC for India implementation. Can someone please guide me where can I store these information in SAP ECC 6. VAT - Plant Level CST - Plant Level TIN - Co

  • Re : Apex 3.0.1 patch number 6113844 download

    Hello, Is there anywhere I can download patch file no. 6113844 by a simple button click rather than from Oracle MetaLink ? I am a new APEX user. I cannot log in to MetaLink requesting me to enter support identifier, I do no understand what it means ?