IPod Nano 5th Gen is stuck on the Apple Logo, won't go into disk mode and won't connect to computer.

My iPod Nano 5th Generation won't turn on; I've held down "Menu" and the center button which makes the Apple logo come up, then it just stays on that. I've followed steps I've seen on here trying to get it into disk mode by holding down the "Play/Pause" button and the center button immediately after the Apple Logo appears but it doesn't respond to that at all. I've charged it and upgraded my iTunes but nothing seems to do anything to it. When I plug it into my computer there is nothing to say it's plugged in on iTunes or My computer or anything. It's driving me crazy and I'm hoping there's a way I can fix it without it having to be sent off.
Any advice would be cracking!
Thanks,
Tilda

Did you ever get this resolved? I'm having the same problem and can't figure it out.

Similar Messages

  • My Ipod Nano (3rd Gen) is stuck on the apple logo and I don't have a computer or iTunes to fix it

    Says it all in the title. My 3rd Gen is stuck on the apple logo and with no computer or iTunes how am I to fix it? I'm in some money troubles at the moment and I dont have that many resources available to fix my beloved iPod. I have tried resetting but it comes back to the logo and then it dies of battery.
    Any suggestions?

    If you have an Apple Store, near you, make an appointment to take it to them. If it's not a hardware failure, they may be able to help.
    Regards.

  • My ipod touch 5th generation is stuck on the apple logo, and i tried fixing it with itunes but it tells me there an error and gives me a code saying i needed to update my itunes and it was.what other ways is there to fix it.

    ipod stuck on the apple logo. i did the itunes thing but it tells me error and gives me a code saying i need to update itunes but it was and i did again but it still said the same thing. help how do i fix my ipod.

    Hey Edgar, how exactly did you do the updates? Are you running iTunes 11.2.2? And you iPod 5 is still running iOS 6.1.2 as your tag shows? or are you running iOS 7.1.1?  More info would be helpful. As Deggie asked, what was the error message, the more detailed the better. One more thing-- is this a Mac machine or a PC? Cheers.

  • My iPod touch (4th gen is stuck on the apple logo when you first turn it on?

    So, my iPod has been acting weird since I updated to iOS 5.1.1 It gets fully carged and dies in three minutes. Well now it gets stuck on the apple logo at startup. It does the apple logo and shuts off and goes to the apple logo again. It does this repeatedly. Is there a way to fix this? I've tried resetting it multiple times, delete all the apps, all the music.

    Hey Edgar, how exactly did you do the updates? Are you running iTunes 11.2.2? And you iPod 5 is still running iOS 6.1.2 as your tag shows? or are you running iOS 7.1.1?  More info would be helpful. As Deggie asked, what was the error message, the more detailed the better. One more thing-- is this a Mac machine or a PC? Cheers.

  • Ipod 5th Gen is stuck on the apple logo with the loading bar not moving

    So I recently decided to restore my iPod 5th gen to factory settings, because I plan on selling it to a friend. When I chose the option to erase all data and reset settings, the iPod turned off, and then came to the black background with the apple logo in the middle. After watching it turn on and off, and not do anything for at least an hour, I searched for answers on the forum. I found that I should reset my iPod by holding the center button and the top right button at the same time for at least ten seconds, or until the device shuts off and then the apple logo is visible again. After I did this, once again, the black background with the apple logo popped up, this time with a loading bar beneath it. After an hour or two of checking on the progress bar, I noticed that it had not made any progress whatsoever. It had not moved an inch since I first started it. What do I do?

    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod touch 4th gen is stuck on the apple logo

    Ok i just got this on Christmas n been working fine...this is the first time the battery been so low and i threw it on the charger and its just turning on and off and staying at the apple logo screen dont no what to do......HELP ME PLEASE!

    1. Plug your iPod into your computer.
    2. Perform a hard reset by holding both the Home button and the Power/Sleep/Wake button until the screen goes black and shows the Apple logo. Release the buttons.
    3. Wait for 15 minutes. It could take less time. Your iPod will make a sound and will show the battery logo.

  • My iPod Touch 3rd Gen is stuck on the Apple Logo screen when starting up.

    I've spent hours on this and it's driving me crazy. I've repeatedly tried going into recovery mode, DFU mode, and restoring (even using custom firmware) but it just won't work. Is there anything at all I can do to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • TS2771 Help me please my ipod touch 5th generation is stuck on the apple logo, I'll admit this has happened after I attempted to jailbreak it. Is there anyone that knows how to solve this please I am desperate!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    I really need the help I would appreciate it.

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            

  • HT4972 My ipod touch 5th generation is stuck on the apple logo bar that hasnt loaded how do i get it off ?

    i need help !

    - There is no 5G iPod touch. The current one is still the 4G iPod.
    - Try here:
    iOS: Not responding or does not turn on
    - If not successful and you can't turn the iPod completely off, let the battery fully drain. After charging for at least an hour try again.
    - Time for an appointment at the Genius Bar of an Apple store.

  • My ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!

    my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!

    Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
    Message was edited by: michael08081

  • My apple Itouch 5th gen. is stuck on the apple ICON

    Hi,
    My Apple ITouch 5th gen. is stuck on the Apple ICON. how can I get this off so that I can use my Itouch?
    Thanks Hunter

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPod Touch (2nd Gen) is stuck on the Apple start up screen.

    My iPod Touch (2nd Gen) is stuck on the Apple start up screen. I have restored it three times so far, but every time it turns off the problem returns. Since restoring yesterday, the battery life has been dramatically shortened as well. I have no idea what to do, as my iPod is out of warranty and this problem started for no reason what so ever. I also have no local access to Apple support. Any help would be greatly appreciated.

    I've tried this. Though it brings temporary success, in the fact that the iPod functions until it is turned off again. Then the problem seems to return. I thought it might be a problem with the backup file, but I have since restored it completely (to have nothing but the basics on) and the problem is still there. 
    Thank you for the responses so far though. Hopefully, they can help others with a similar problem.
    mary annfromhamilton wrote:
    my ipod touch ( 2 gen ) isnt even updating from version 4.2.1 like its says its up tp date
    I believe mine is also 4.2.1. I made an error when selecting the OS at the bottom of my posts and have no idea how I change it.
    *EDIT* - I have now managed to change my iOS, not that it makes much difference. I've heard people have been having trouble with iOS 4 on the 2nd Gen iPod Touch?
    Message was edited by: Rickithly @ 14:40, 03/08/2011

  • HT201559 I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

    I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    See: http://support.apple.com/kb/TS3694#USB
    However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality.

  • On my Iphone 4, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. help?

    On my Iphone 4s, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. A few days before that the speaker suddenly stopped working during a call. I also reset everything by connecting to itunes but no luck then. help?

    Hey there xntricj,
    It sounds like you are putting a password for your Apple ID that works without issue on your iPad into your iPhone but get a message saying that the password is incorrect. I recommend the steps from the article named:
    iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
    http://support.apple.com/kb/TS5207
    After completing iOS 7 setup, go to Settings > iCloud.
    Scroll down and tap Delete Account, then enter your previous Apple ID and password.
    If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

Maybe you are looking for

  • Creating sequences for all tables in the database at a time

    Hi , I need to create sequences for all the tables in my database. i can create individually ,using toad and sqlplus. Can any one give me a code for creating the sequences dynamically at a time for all the tables. it is urgent .. Regards.

  • Invalid number error when using external table

    Hello. I have a problem with creating an external table with number field. My txt file looks like: 11111|text text|03718 22222|text text text|04208 33333|text|04215 I try to create external table like: create table table_ex ( id varchar2(5), name var

  • Install Solaris 8 on Ultra Sparc 5

    Hello! All I am trying to format my hard Drive which running on Solaris 7 and install Solaris 8. Could someone tell me the step by step process(in detail) to finish this job? Thanks John

  • Online redo logs fill-up due to long running SCM processes

    DB2 v9.7 AIX v6.1 P570 Running Standard SAP Code Going live with SCM system running SNP/DP GATP how can we avoid having our online redo logs fill-up due to long running processes (i.e., CTM. Process Chains, BOP, DP Runs) Need to know SAP Best Practic

  • Journal Reciver in R3 SID DATA.

    Hi All We had backed up complete system using GO SAVE 21 option. We restored the server using the same command. After restoration SAP is up and running properly. We found that Journal Receivers are created in R3<SID>DATA instead of R3<SID>JRN. Now ou