Ipod nano 5th gen not recognized nano 2nd gen works fine.

I have 2nd gen iPod Nano that works fine.
I just upgraded to a 5th gen iPod Nano.
Problem is can not find device in "My Computer" or on iTunes.
I have switched USB ports.
I have unistalled & reinstalled latest version of iTunes.
I have made sure Windows is updated.
I have gone into Device Manager uninstalled & reinstalled both using the Apple supports recomended way & as Windows suggests when I troubleshoot it.
I still get the yellow exclamation point next to Apple Mobile Device driver with the dreaded code 10.
Before I pull my hair out and bang my head against a brick wall any suggestions or help please!
My OS is Windows XP pro.

Hello livoryy
It sounds like the battery just does not hold a charge. Check out the page below and look at the battery replacement section to get all the answers to what you are asking.
Service Answer Center – iPod
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Regards,
-Norm G.

Similar Messages

ITunes not recognizing my 2nd Gen iPod Nano.

"An iPod has been detected, but can not be identified properly. Please disconnect and reconnect the iPod, then try again."
This is the message my MacBook keeps giving me when I plug in my iPod Nano. All was fine until I downloaded 7.5 (then 7.6)
I've used different USB cords, I've reset my iPod Nano, I've switched it to Disk Mode to try to restore it that way...nothing works. And I know it's not my iPod because I deleted 7.5 and reinstalled 7.0 and it worked just fine. Unfortunately I need 7.6 in order to sync my new purchases with my iPod.
Anyway, anyone else having these issues with the new iTunes updates?????? Any solutions? Or does Mac just expect me to buy new iPods every 6 months....????? (very annoyed with mac right now as my other 30GB iPod Classic just starting flashing the sad ipod icon...i've had it 1 1/2 years....so very obnoxious.)
Thanks for your time!

I'm glad (selfishly glad, I guess) that someone else is going through this too. Just upgraded to new iTunes and now my little 2GB nano isn't even recognized. Tried everything you did as well. No worky.
I will be anxious to see what someone comes up with...

Ipod nano 5th generation not recognized by itunes...help!

I have a 5th generation ipod nano, music suddenly vanished, not sure why. Tried to download music from itunes, but the device is not comming up on itunes. Any ideas?

help, i got a new ipod 5th generation and itunes is not recognizing the ipod. I've tried everything, I even restored it on my dads computer. I lost all my files and I'm extremly frustrated. I'm not pluging it into the wrong port b/c I have a PC so its clear what port I'm putting it into, the ipod is chargining, and the video's are coming up, but the ipod is not syncing, I don't know what to do.
please email me at: [email protected]

Ipod nano 5th generation not recognized by itunes

I just got a new iPod nano and when I connect it, nothing happens. Itdoes not appear in the device list in iTunes. The nano screen says it is connected but I didn't get to even set it up in itunes. I've tried everything on the apple site - uninstalled itunes and then reinstalled, reset the ipod. I just can't restore because the apple site says I need to do that through iTunes, but I can't b/c it's not showing up in the device list. VERY FRUSTRATING!!

help, i got a new ipod 5th generation and itunes is not recognizing the ipod. I've tried everything, I even restored it on my dads computer. I lost all my files and I'm extremly frustrated. I'm not pluging it into the wrong port b/c I have a PC so its clear what port I'm putting it into, the ipod is chargining, and the video's are coming up, but the ipod is not syncing, I don't know what to do.
please email me at: [email protected]

IPod classic 5th is not recognized by operating systems or iTunes

I have an iPod Classic 5th generation A1136 (80g with video). Recently, right around the time of the new iTunes release, my iPod is no longer recognized by my Mac (in disk mode) or in iTunes (in any mode). It still charges when connected to my computer. It plays music (and video) in all of my docking stations. It isn't recognized by the machine. I have tried iTunes on other machines. I have tried the 5 R's. I have put it in disk mode. I have reset the iPod. I have reinstalled iTunes on my Mac. Every solution i have read about, I have pretty much tried. Could this be a hardware issue? If so, what sort of issue would produce these symptoms.

You have a 4th gen Ipod. First reset the ipod , then put it in disk mode. then plug it back into computer. That second icon of the folder means it can't find an OS. You might have to take it apart to see if you have the hard drive seated correctly and the hard drive ribbon. If none of this works, uplug and restart it, hold you ear to it and listen to see if you hear a clicking or buzzing sound. If you do the hard drive is bad. To do a reset -toggle the hold switch on the end by the screen then press and hold the center button and the menue button at the same time-then as soon as the apple comes up - press and hold the center button and the botton of the click wheel, disk mode should come up. Plug back in and see if it comes up in itunes do a restore. The bottom of the click wheel is play- pause. It's also what you hold to shut it down.

Canon HF100 not recognized by MacBookPro but works fine with MacPro???

I got a Canon HF100, both Mac Pro and MacBookPro running 10.5.5 with iMovie 08. Import works fine on the Mac Pro but the laptop cannot import. It recognizes sees the camera when I attach the USB cable in PC mode. System Profiler sees the camera under " USB"
When I try to import a movie project iMovie08 only brings up iSight. I can't toggle the "camera mode icon" to my camcorder.It stays put at "iSight".
How can two computer running the same program under the same OS not function the same way?
Any suggestions are greatly appreciated.

Sometimes this tip can come into play:
*All USB ports are not created equally*
"Many times I have hooked up a USB hub to my MacBook, only to plug in an iPod and have it rest in the a phantom world, neither charging nor showing up in iTunes. This happened whether the hub was powered or not, and even if the port had no other devices plugged in. On this week's MacBreak Weekly podcast, Andy told us why. The rear USB port, the one nearest the screen, is in fact already on an internal hub, shared with everything USB inside the case: the keyboard, the Bluetooth, the trackpad, the iSight camera and the infra-red receiver. Adding a four way hub to this is bound to end in disaster.
So I tested it out. I hooked up a hub to the front port, loaded with two USB hard drives (both self powered), a Logitech wireless laser mouse and an iPod Touch (in its dock). Result? It works perfectly every time. The same setup swapped to the rear port is intermittent. Sometimes the iPod works, sometimes it doesn't."

Ipod nano 3rd Gen not recognized by itunes or windows 7

USB device not recognized.
things I have done
put Ipod in disk mode still didn't recognized
My Ipod Classic 6th Gen works fine
It shows 3 Mass Storage Device
when I plug in Ipod nano 3rd gen it shows unknow device
have deleted Mass storage devices and Apple Moble Devices
unpluged computer from wall
nothing solving problem
I also tried it on my laptop its not being recognized
my wife Ipod nano is doing the same thing as mine
its got to be the software download from itunes because it has worked on all previous versions.

I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
I have tried resetting, I have tried downloading newest Itunes.
Must be the Nano itself if it doesn't get recognized by mutliple PCs?
I haven't used the Nano for probably 2 months. Previously it worked fine...
One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

IPod Nano (3rd gen) not recognized by iTunes

I've got a 933mhz iBook G4 running 10.5.1, I hooked up my brand new iPod Nano, iTunes recognized it, I was halfway through the syncing process when I decided to stop it during the photo sync. Now the iPod keeps shutting down right after it tries to sync then starts back up again. It's not recognized by this computer at all. I tried to hook it up to my G5 iMac, and no go there. Ideas anyone?

I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
I have tried resetting, I have tried downloading newest Itunes.
Must be the Nano itself if it doesn't get recognized by mutliple PCs?
I haven't used the Nano for probably 2 months. Previously it worked fine...
One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

Ipod nano (both 6th and 7th gen) not recognized by itunes

Ipod nano (both 6th and 7th gen) not recognized by itunes. Before you send me to the help pages, i have followed EVERY STEP you provided, from uninstalling, removing temp files... you name it. I was recently upgraded to windows 8.1.

For anyone else having this problem, I found this solution to work. Try this first:
a) Get Windows to restart the drivers:
    - disconnect your USB device and close ITunes
    - connect your USB device
    - if ITunes loads, close it.
b) File explorer:
Open File explorer and browse to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
In that folder there should be a set of files named "usbaapl64...."
right click on the one ending in "INF"
Select Install. It's very quick.
remove the USB device
c) Restart the computer.
When you login again, load ITunes before you attach your USB device.
d)If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
f) If still not works, try re-install iTunes. Go into the Unstall Programs (in Control Panel) and uninstall everything that says Apple, and uninstall Bonjour. With the fresh install of iTunes, everything came back and is should work. Hope it helps.
<Link Edited By Host>

Nano 6th gen not recognized even after downloading itunes

nano 6th gen not recognized even after downloading itunes

Well I'm not at all technical so all I can tell you is the docking station is plugged into a wall socket - and the cable is the original one that came with the docking station, and my other iPod, which is about 5 years old charges fine on the unit, it's driving me bonkers!!!! Thanks

My iPod Nano 7th is not recognized by my ASUS 11.6 mini PC with Windows 8 and IE 10. Any suggestions? Thanks. Lily

My iPod Nano 7th is not recognized by Windows 8 in my ASUS 11.6 mini PC with IE 10. Any suggestions? Thanks. Brownalex

Hey Brownalex,
I'd follow the steps in this article if your iPod nano doesn't appear in iTunes and also doesn't appear as a disk drive in My Computer:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Hope that helps,
David

IPod Shuffle 2nd Gen not recognized. I feel like I've tried everything. Help.

iPod Shuffle 2G is not recognized by my 2013 MacBook Air. It is not viewable anywhere. I am getting the blinking orange light.
iTunes is up to date & has been reinstalled.
I have restored the iPod according to the instructions I have seen in similar threads.
Tried plugging into a USB hub with its own power source.
Shuffle will charge in USB wall plug & play music.
I am using the original USB dock that it came with it.
Thanks for any suggestions.

If you do
Apple Menu -> About This Mac -> More Info -> System Report
to run System Information (or System Profiler), does the "iPod" appear as a connected device under
Hardware -> USB
Try doing the above with the shuffle connected directly AND using the power USB hub you mentioned.
Have you tried connecting something else to that USB port, to confirm it is working properly? Preferably, it should be something similar, like a USB flash drive or port-powered external drive (data storage devices that get power from the USB port).
Two other related tests... Create a new user account in System Preferences Users & Groups pane. The new user account can be Standard or Admin. Log out and log in to the new user account (do not use Fast User Switching). In the new user account, run iTunes and connect the shuffle.
And the other test. Start up in Safe Mode
http://support.apple.com/kb/ht1564
Connect the shuffle while started up in safe mode, to see if it appears anywhere. These two test are to see if you have a process running when you start up normally, that interferes with the iPod being recognized.

Ipod Touch 3rd Gen - not recognized by computer or itunes. Shows cable pointing to itunes logo. Can't reset it. Doesn't work at all. Have tried all the supposed fixes on the apple site with no luck. It suggested asking other users !

I have a 3rd Generation ipod touch that is not recognized by itunes or my computer. My itunes works with other apple devices I own. I cannot reset the ipod touch and can never get to the screen where it is supposed to show a red battery to turn it off. I can't reset it. Have tried to use the suggestions on the apple site to no avail. Any suggestions ?

From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

IPod Touch 3rd Generation not Recognized by iTunes but recognized by Windows as "Apple iPod"

Exactly what the title says. My iTunes will not recognize my iPod touch, but my Windows Vista will recognize it with autoplay. I updated iTunes about 10 minutes ago, tried two different apple wires, and 3 different USB ports that work. Can anyone help me fing a solution? I found the iPod Touch assistant thing and tried all of those steps but the problem recurred. Thank you in advance!
-Dylan

I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
I have tried resetting, I have tried downloading newest Itunes.
Must be the Nano itself if it doesn't get recognized by mutliple PCs?
I haven't used the Nano for probably 2 months. Previously it worked fine...
One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

Time to replace it: $49 2nd Gen shuffle at online Apple Store...

Ipod nano 5th gen not recognized nano 2nd gen works fine.

Similar Messages

Maybe you are looking for