Ipod nano 5th gen wont restore
My iPod nano decided to not charge or sync, and then when I decided to show up on my macbook pro, I clicked restore and half way through the restore it decided to drop out and wont come back up on the computer. I have tried plugging it into another MacBook Pro, a Dell PC and same thing. Also when I do plug it in it turns into a white screen and shows a tick and ok to disconnect and doesnt even come up on the Mac.
Any ideas from here?
Thanks
If you have not already, do a Reset on the iPod
http://support.apple.com/kb/ht1320
In case the battery is drained, do the Reset while it is connected to power (USB port or power adapter). If that does not help, try putting it into Disk Mode
http://support.apple.com/kb/ht1363
If Disk Mode works, shut down (power off) the MacBook. Disconnect all other USB devices and connect the iPod to a direct USB port on the MacBook. Start up the MacBook, and run iTunes to see if the iPod is recognized. iTunes may prompt you with an "iPod in recovery" message. Try to do a Restore again, if possible.
Also, to rule out a bad USB docking cable, try a different cable or use that cable with a different device, if possible. Since you tried it with different computers, I think you've ruled out something wrong with the USB port on the first MacBook.
Similar Messages
-
My ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes
my ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes
What have you tried so far in terms of troubleshooting? After leaving the Nano to sit and charge for at least 30 minutes, try resetting it by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. You'll want to make sure the Hold Switch is not in the On position as well.
B-rock -
IPod Nano 5th gen wont sync photos with iTunes 10
My ipod nano 5th gen, is having trouble syncing photos and saying the file isnt there and it wont sync the photos. what could be wrong ??
i have re-set settings and that didnt work
PLEASE HELPPPP!!!!!!!!!!That might be a damaged iPod photo cache, Kid.
If you delete your photo cache as per the following document, are you able to get a proper photo sync?
[iTunes: Photo sync creates iPod Photo Cache folder|http://support.apple.com/kb/TS1314] -
My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes. When I click on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT1853 ipod nano 5th gen wont uncorrupt
iTunes pop up indicated Nano was corrupt. I restored to factory and reset both standalone and connected to computer, even using different cables and ports. toggled on/off switch and its in on position. screen shows "connected eject before disconnecting" or goes to sleep. before restoring it would show music and scroll through anything just not play music (songs stayed at 0:00). iTunes wouldnt recognize the ipod (and iTunes at latest version). neither did syncios. I've read and tried troubleshooting but havent come across anything that has helped yet. what else can I do? thanks
That might be a damaged iPod photo cache, Kid.
If you delete your photo cache as per the following document, are you able to get a proper photo sync?
[iTunes: Photo sync creates iPod Photo Cache folder|http://support.apple.com/kb/TS1314] -
I upgraded to itunes 10.6 and with that "upgrade" I can't manually sunc to my ipod nano 5th gen anymore. I have re-installed itunes, restored my ipod, tried syncing under another users account and everything else I can think of. It syncs ok upon initial start-up but then when I tryp to select podcasts or music to sync to it, itunes crashes. Now that I restored my ipod, I can't even get my old podcasts much less add new ones.
Do you have any better luck with that if you update to iTunes 10.6.1.7?
From the notes for the release:
iTunes 10.6.1 provides a number of improvements, including:
• Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
• Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
• Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
• Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
http://www.apple.com/itunes/download/ -
When I repaired my iMac G4, I decided to use it to sync my iPod content. But I want to restore it to defaults to make it work better. I am running iTunes 6 and I don't want to download iTunes 11 just to reset my iPod. How do I restore entirely my iPod Nano 5th Gen to factory defaults using iTunes 6?
I click restore, it said: "The iPod software update server could not be contacted. Make sure your network settings are correct, and your network connection is active, or try again later." It's not the Internet connection, I'm using the same computer with the problem to write this message. Can I bypass iPod update and restore it and install the updates manually or something?
-
Have a ipod nano 5th gen., keep getting error message 13019!!!
I have an ipod nano, 5th gen. Yesterday when I tried to sync music I received error code 13019. I tried unsyncing music, resyncing,...finally ended up restoring, resetting..nothing worked. All updates are current on itunes and ipod. This has never happened. There is no voice memos options on playlist either. Please help!
So you worked through the suggestions in this Apple support document then?
iTunes displays a -69 error when syncing iPod
B-rock -
IPOD NANO 5TH GEN Broken Because of Water Damage
IPOD NANO 5TH GEN water damage, it worked untill i put it on the charger, and it wont start again, Is there anyway to save this IPOD NANO PLEASE HELP
You've definitely shorted out the battery and may have done logicboard damage. You can do an out-of-warranty replacement at your nearest Apple Store. Make a Genius Bar appointment before you go.
-
What is the screen lock default code for iPod nano 5th gen?
What is the screen lock default code for iPod nano 5th gen?
There isn't one. You'll need to connect the Nano to your iTunes library and restore to factory settings. There is no other way.
B-rock -
my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!
Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081 -
when i plug my ipod nano (5th gen) into my windows 7 laptop it makes the noise to say that it has connected with teh usb port but does not show up in my computer or itunes? i dont know what to do but have already tried the troubleshooting guide on your website...
Does the iPod appear in device manager when you plug it in? If not, what appears there?
iPod: Does not appear in Windows or iTunes and Device Manager is empty
B-rock -
I bought a used ipod nano 5th gen and it came with 900 songs on it. How can i transfer, sync, and retain the music before i authorize this unit to my itunes account? It says it will erase all content once I sync with my imac7. Is there anyway to keep the music??? please help!!
Thanks,
AaronThe music does not belong to you. You have no legal right to it and there is no way to keep it.
Sorry -
My Ipod touch 5th Gen wont turn on or charge...
My week old Ipod touch 5th gen. wont turn on or charge. When it is connected to the computer or a charger it shows the dead battery symbol and never charges even if left connected for over and hour.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch 5th gen wont turn on!! Help!!
My ipod touch 5th gen wont turn on!! Help!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I have CS6 on my iMac. I want to load it onto an external drive to use off my Mac Air. I have the serial number. How do I do this without having to subscribe to CC?
-
NEED HELP PLEASE Setting up 2 VLANS and a redundant WAN connection
I have a remote branch office which is actually a huge bar/lounge. The bar wants to enable patrons to access the Internet with their wireless laptops. I want to prevent those patrons from accessing our private network, and also prevent them from trav
-
I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...
-
Display attachment with GOS-Service direct
Hello, In my application i´am using the generic object services by starting the service "view attachment-list" directly (in a 4.6C System). In transaction FB03 it is possible to show the original scanned document from the opt. archive in the attachm
-
Matrix Delimited Output Problem
When report data is very huge Oracle Reports run time engine is not generating the report in delimited format.I am using matrix stayle report for generating output in delimited format.I ame getting Dr.Watson error.please advice me as early as possibl